Geovision 84-CAW2200-100U 2MP Wireless Cube IP Camera
Overview
The Geovision 84-CAW2200-100U is a 2MP wireless cube camera designed for small-to-medium deployments where wired infrastructure is impractical or cost-prohibitive. The compact cube housing fits retail environments, offices, warehouses, and access points where traditional bullet or turret cameras would be visually intrusive. 2MP resolution with WDR (Wide Dynamic Range) captures usable detail across mixed lighting—bright windows alongside dim interiors—without the motion artifacts that plague aggressive HDR. H.264 compression cuts bandwidth consumption roughly in half compared to motion-JPEG, meaningful on bandwidth-constrained networks and when extending storage life. Wireless architecture eliminates cable trenching and wall penetrations, streamlining installation timelines and reducing physical site disruption.
Compatibility
The 84-CAW2200-100U integrates with Geovision Management System (GMS) software for multi-camera oversight, event-triggered recording, and remote network access. H.264 video output supports third-party VMS platforms and NAS recording systems that recognize ONVIF or Geovision proprietary protocols—verify ONVIF Profile S/T compatibility with your target VMS before deployment if integration beyond Geovision's ecosystem is required. The camera operates as a standalone IP endpoint on your network, compatible with standard Ethernet and wireless access points that support 802.11n or later.
Installation Notes
Power is delivered via 5V DC (not PoE, despite earlier references in legacy documentation)—plan a dedicated 5V supply or wall adapter to the camera location. Wireless connectivity requires clear line-of-sight to your access point; signal obstruction from metal cabinets, concrete walls, or electrical conduit reduces range and frame rate stability. Mount the cube on a wall, ceiling, or shelf using the integrated bracket; ensure the PIR sensor (if equipped) has unobstructed coverage of your target zone. Test wireless signal strength and frame-rate consistency during commissioning—if drops occur, relocate the access point or add a repeater before finalizing the installation.
What's in the Box
- 1x Geovision 84-CAW2200-100U camera unit
- 1x 5V DC power adapter
- 1x mounting bracket with hardware
- 1x quick-start guide
