Panduit P32W2R1-100-7 Pan-Way Foam Tape, White, 1/32" x 1" x 7 yd
Overview
The Panduit P32W2R1-100-7 is a white rubber-adhesive foam tape engineered for use with Pan-Way surface raceway systems. At 1/32" thick, 1" wide, and 7 yards per roll, it is designed to seal gaps, dampen vibration, and provide a finished, secure fit when mounting raceway channels to wall and ceiling surfaces. If you are installing Panduit Pan-Way raceway and need a compliant foam backing to close air gaps or reduce rattle, this is the consumable to spec. P32W2R1-100-7 (often searched as P32W2R1 100 7) ships as a single roll with a carton quantity of 50 for project-scale procurement.
Key Features
- 1/32" (0.8mm) Foam Thickness: Thin enough to avoid distorting raceway channel alignment while still filling minor surface irregularities — critical on textured drywall or painted masonry where a thicker tape would create visible gaps at the channel edge.
- 1" (25.4mm) Width: Matched to standard single-channel wire management raceway base widths. No trimming required on compatible Pan-Way profiles — install straight from the roll.
- 7-Yard (6.4m) Roll Length: One roll covers approximately 20 linear feet of raceway run. For a typical 100-foot corridor run, plan on roughly 5 rolls — straightforward quantity estimation for bid packages.
- Rubber Adhesive: Rubber-based pressure-sensitive adhesive maintains bond across temperature swings common in mechanical rooms, server closets, and exterior-facing interior walls. It will not dry-brittle like acrylic alternatives in low-humidity environments.
- White Color: Matches standard white Pan-Way raceway aesthetics. The tape remains hidden once the raceway cover is snapped on, but correct color ensures no visible contrast at channel ends or in open-plan areas where partial installation is visible during phased work.
- Pan-Way Sub-Brand: Sourced from Panduit's dedicated surface raceway systems line, meaning dimensional tolerances are matched to Pan-Way channel profiles — not a generic foam tape adapted for the application.
- Single-Unit Packaging, 50-Unit Carton: Package quantity of 1 allows single-roll orders for small jobs or sample verification; carton quantity of 50 supports large-scale raceway deployment projects without repeated small orders.
Integration & Compatibility
This tape is specified for Panduit Pan-Way surface raceway systems. Verify channel base width against the 1" tape width before ordering — narrower raceway profiles may require a different tape SKU. The rubber adhesive is compatible with standard painted drywall, concrete block, and smooth metal surfaces. Avoid application on silicone-contaminated or heavily textured surfaces without priming, as adhesion will be compromised.
What's in the Box
- 1x Panduit P32W2R1-100-7 foam tape roll (1/32" x 1" x 7 yd, white, rubber adhesive)
Frequently Asked Questions
Q: What are the exact dimensions of the P32W2R1-100-7 foam tape?
A: The tape is 1/32" thick, 1" wide (25.4mm), and 7 yards (6.4 meters) long per roll.
Q: What type of adhesive does the P32W2R1-100-7 use?
A: It uses a rubber-based pressure-sensitive adhesive, which maintains bond integrity across temperature variations better than acrylic adhesives in dry or variable-humidity environments.
Q: How many linear feet does one roll cover?
A: One 7-yard roll covers approximately 21 linear feet of raceway run. For large projects, the carton quantity is 50 rolls.
Q: Is the P32W2R1-100-7 compatible with all Pan-Way raceway channels?
A: It is designed for Panduit Pan-Way surface raceway systems. Confirm the channel base width is 1" before ordering — narrower profiles require a different tape SKU.
Q: Can this tape be ordered as a single roll?
A: Yes. Package quantity is 1 (single roll). Carton quantity is 50 for larger project procurement.
The P32W2R1-100-7 is one of those consumables that integrators overlook until they are standing on a lift with a raceway channel that won't sit flush. At 1/32" thick with a rubber adhesive backing, this tape is specifically dimensioned for Pan-Way single-channel base widths — it is not a generic foam strip adapted after the fact.
Technical Highlights:
- 1/32" Foam Thickness: Thin enough to keep the raceway base parallel to the wall surface without creating a visible tilt at cover seams — a common complaint when installers substitute thicker generic foam tape.
- 7-Yard Roll (6.4m): Covers roughly 21 linear feet per roll. On a 200-foot corridor with continuous raceway, budget approximately 10 rolls — easy to calculate for material takeoffs on bid day.
- Rubber Adhesive: Holds in low-humidity server rooms and near HVAC diffusers where acrylic adhesives lose tack over time. Relevant for any permanent installation expected to last the life of the raceway system.
Deployment Considerations:
- Apply only to clean, dry surfaces — paint over drywall compound, textured block, or silicone-contaminated metal will compromise initial adhesion and allow the raceway base to shift before final fastening.
- The 1" width is matched to standard Pan-Way single-channel profiles; if you are working with a wider or narrower Panduit raceway variant, verify the base dimension before pulling stock — using the wrong width tape leaves exposed adhesive edges that collect dust and debris over time.
This tape is the correct spec for permanent Pan-Way installations in commercial office buildouts, school AV deployments, and healthcare facility low-voltage runs where a clean, vibration-dampened raceway finish is required by the spec sheet.
