ACTi FLEX 27-Inch 4K LCD Monitor

Overview

The ACTi FLEX is a 27-inch flat LCD monitor with native 3840×2160 (4K) resolution and 8ms response time. This display density—163 ppi on a 27-inch panel—delivers the pixel-per-inch density needed to maintain evidence-grade detail across multi-camera surveillance feeds without excessive scaling or interpolation. The 8ms gray-to-gray response time means camera feeds render without perceptible ghosting or lag, critical when operators are monitoring live action or reviewing forensic playback.

Deploy the FLEX in control rooms where you need to run multiple simultaneous video streams—four 1080p windows, two 4K streams, or mixed aspect ratios—without sacrificing legibility. The 4K resolution cuts through the detail loss that comes from stretching standard-definition or 1080p feeds across larger displays.

Compatibility

The FLEX accepts standard video inputs found on surveillance control systems and NVRs: HDMI, DisplayPort, or DVI connections typical of enterprise VMS workstations. Confirm the specific input type required by your control room infrastructure—most modern surveillance systems use HDMI or DisplayPort outputs. If you are integrating with legacy analog or SDI-based systems, you will need external scaling or conversion hardware.

Installation Notes

Mount the FLEX on a standard monitor arm or desktop stand using the VESA 100×100 pattern. Position the display to minimize glare from windows or overhead lighting—4K panels benefit from controlled ambient light to avoid washed-out contrast, especially for forensic review. Allow adequate ventilation around the display; surveillance control rooms often run monitors continuously, so confirm your thermal management supports 24/7 operation without heat accumulation.