Panduit FHDEC2X2LYL FiberRunner 2x2 End Cap
Overview
The Panduit FHDEC2X2LYL is a press-fit end cap designed specifically for the Panduit FiberRunner 2x2 fiber routing channel system. It closes off open channel ends and fittings — a small detail that matters when your data center's fiber routing infrastructure needs to look finished and protect cable entry points from accidental snagging or debris ingress. Installation is tool-free: the cap presses directly into the channel opening with no coupler required. Sold individually (package quantity: 1), with carton quantities of 5 for larger deployments.
Key Features
- Press-Fit Installation, No Coupler Required: The FHDEC2X2LYL snaps into open channel ends by hand. No hardware, no coupler, no tools — cuts termination time to seconds per run, which adds up fast across a fully cabled data center floor.
- Polycarbonate/ABS Construction: The material combination delivers impact resistance from the ABS blend and temperature stability from the polycarbonate — appropriate for data center and central office environments where equipment density creates localized heat pockets.
- RoHS Compliant: Meets RoHS requirements out of the box, keeping your structured cabling installation aligned with environmental compliance requirements without additional documentation overhead.
- UL-Listed Optical Cable Routing Assemblies (to 2024A): Carrying UL certification through the 2024A standard means the FiberRunner assembly — with this cap installed — satisfies the fire and safety listing that inspectors look for in commercial and enterprise builds.
- Telcordia GR-63-CORE and NEBS Level 3 Compliant: These standards govern seismic and environmental performance for network equipment installations. If you're deploying in a carrier hotel, central office, or any facility subject to NEBS requirements, this end cap doesn't break your compliance posture.
- Compact Footprint: At 2.37 in. wide × 2.14 in. tall × 0.58 in. deep (60.2 mm × 54.4 mm), the cap sits flush within the channel profile without extending into adjacent cable trays or overhead pathways.
- Yellow Color Coding: The yellow finish matches the FiberRunner 2x2 channel system's standard color designation, maintaining visual consistency across your fiber routing infrastructure — useful when tracing runs or auditing during adds, moves, and changes.
Integration & Compatibility
The FHDEC2X2LYL is designed for use with Panduit FiberRunner 2x2 fiber routing systems in data centers and telecommunications central offices. It terminates open ends on hinged-lid channels and fittings in the 2x2 (2-inch by 2-inch / 50mm by 50mm) form factor. If you are running a different channel size in the same family, verify the matching end cap SKU — the press-fit geometry is size-specific. Competitor cross-reference: this cap is positioned against the FGS-HMEC-C from an alternate manufacturer, useful context if you are standardizing or replacing mixed-brand infrastructure.
What's in the Box
- 1x Panduit FHDEC2X2LYL FiberRunner 2x2 End Cap (Yellow)
Frequently Asked Questions
Q: Does the FHDEC2X2LYL require a coupler or any hardware to install?
A: No. The FHDEC2X2LYL is a press-fit end cap — it mounts directly into the open end of the FiberRunner channel or fitting by hand. No coupler, no tools, and no additional hardware are required.
Q: What channel size does the FHDEC2X2LYL fit?
A: It is designed for the FiberRunner 2x2 system, covering 2-inch by 2-inch (50mm by 50mm) fiber routing channels and fittings. It is not interchangeable with other FiberRunner sizes.
Q: Is the FHDEC2X2LYL RoHS compliant?
A: Yes. The FHDEC2X2LYL meets RoHS requirements. It also carries UL listing for optical cable routing assemblies to the 2024A standard and conforms to Telcordia GR-63-CORE and NEBS Level 3 application tests.
Q: What is the carton quantity for the FHDEC2X2LYL?
A: The FHDEC2X2LYL is sold in a package quantity of 1, with a carton quantity of 5. Order multiples if you are terminating several channel runs in a single project.
Q: What environments is the FHDEC2X2LYL rated for?
A: It is specified for data centers and telecommunications central offices. Compliance with NEBS Level 3 (Telcordia GR-63-CORE) makes it suitable for carrier-grade and central office installations subject to seismic and environmental performance requirements.
The FHDEC2X2LYL is the kind of component that gets overlooked in a BOM until an inspection flags an open channel end or a cable pull damages an exposed fiber at a termination point. At 0.58 inches deep and a true press-fit design, this end cap installs in under five seconds per location — no tools, no coupler — which matters when you are closing out 40 or 50 channel ends on a dense overhead pathway in a live data center.
Technical Highlights:
- NEBS Level 3 / GR-63-CORE: Satisfies the seismic and environmental performance tests required in carrier hotel and central office deployments — this is the compliance tier that gets scrutinized on telco buildouts, and the end cap doesn't break the assembly's listing.
- UL-Listed to 2024A: The entire FiberRunner optical cable routing assembly, including this end cap, carries UL certification to the 2024A standard. That listing is what your AHJ will ask for at sign-off.
- Polycarbonate/ABS Material: Not a commodity plastic — the blend handles localized heat from high-density rack environments without deforming, and the ABS component provides enough impact resistance for ladder-rack and overhead pathway installations where physical contact is routine.
Deployment Considerations:
- The FHDEC2X2LYL is size-specific to the 2x2 (50mm × 50mm) FiberRunner channel. If your installation mixes channel sizes, order the matching end cap SKU for each size — the press-fit geometry will not transfer between sizes.
- Package quantity is 1 unit; carton quantity is 5. For a full rack-row termination project, order in carton multiples to avoid shortages mid-installation — these are easy to undercount on the initial BOM.
This end cap belongs on every FiberRunner 2x2 channel termination in a data center or central office build — specifically where open channel ends are exposed to foot traffic, raised-floor plenum airflow, or physical cable management activity during ongoing adds and changes.
