Panduit RAFC10EI-X Pan-Way Right-Angle Raceway Fitting
The Panduit RAFC10EI-X is a one-piece hinged right-angle fitting designed for clean 90-degree transitions in LD10 and LDPH10 Pan-Way surface raceway systems. Built for perimeter power and data cable routing along walls and baseboards, this snap-on fitting maintains a controlled 1-inch bend radius to protect low-voltage cabling while meeting TIA/EIA pathway standards. Rigid PVC construction with electric ivory finish matches Panduit's LD10/LDPH10 raceway color, and the hinged design allows field access without disassembly. Ships in 10-packs for multi-room installations where consistent 90-degree turns are required at corners, doorways, and wall junctions.
Key Features
- One-piece hinged PVC construction with snap-on installation—no screws or adhesive required for raceway attachment
- Controlled 1-inch bend radius prevents kinking or pinching Cat5e/Cat6/Cat6A cables, power cords, and fiber runs
- UL94V-0 flame rating and FT4 compliance for in-wall and plenum-adjacent installations
- Electric ivory finish coordinates with Panduit LD10 and LDPH10 two-channel surface raceway
- UL Listed 5A, TIA/EIA compliant for structured cabling and NEC Article 800 pathway requirements
- 10-pack quantity for multi-zone deployments with bulk packaging (50-unit cartons for large projects)
The RAFC10EI-X is engineered specifically for Panduit's LD10 and LDPH10 dual-channel raceway profiles, which separate power and low-voltage data paths in a single surface-mount assembly. The fitting's 3.18" x 3.18" footprint and 0.93" height match the raceway cross-section, and the 1" controlled bend radius exceeds the 4x cable diameter minimum for Cat6A (0.35" OD → 1.4" min radius) and fiber patch cords. The hinged cover snaps open for adds/moves/changes without removing the base, and the rigid PVC body resists impact and UV degradation in warehouse, retail, and office environments. Installation is tool-free: slide the fitting onto the raceway end, snap the hinge shut, and route cables through the 90-degree channel.
Pan-Way LD10/LDPH10 raceway systems are the standard for perimeter cable distribution in commercial buildings where in-wall routing is impractical—retrofits, concrete/masonry walls, or spaces requiring ADA-compliant pathways. The RAFC10EI-X handles corners at reception desks, retail checkout counters, control rooms, and classroom walls where PoE cameras, access control readers, and IP phones need clean cable paths without exposed wire. Electric ivory blends with off-white walls and trim, and the UL94V-0 + FT4 ratings allow installation within 5 feet of plenum-return grilles per NEC 300.22(C) exceptions. For multi-story buildings or large open-plan offices, the 10-pack format ensures consistent turns across dozens of workstations, and the 50-unit carton breaks down project pricing for contractors running 500+ feet of raceway.
UL Listed 5A certification confirms compatibility with structured cabling systems, and TIA/EIA compliance makes this fitting eligible for data center and enterprise network installations where pathway documentation is required for warranty and insurance. The controlled 1" bend radius is not optional—sharp 90s can degrade 10GBase-T performance or crack fiber cores, and the RAFC10EI-X's smooth arc prevents both. For integrators managing PoE budgets or multi-zone access control, the snap-on design cuts labor time by 60% versus field-cutting and gluing PVC conduit, and the hinged cover means no raceway disassembly when adding a camera drop or swapping a failed cable. Ships in contractor-grade 10-packs with UPC 074983525690 for inventory tracking across job sites.
