Panduit UTP28SP6IN-48 Cat 6 28AWG 6" Patch Cord 48-Pack

Panduit UTP28SP6IN-48 TX6-28 Cat 6 UTP Patch Cord 48-Pack

High-density datacenter and IDF closet installations demand smaller-diameter patch cords to maximize airflow and simplify cable management in crowded racks. The Panduit UTP28SP6IN-48 delivers a 48-pack of 6-inch Cat 6 patch cords built with 28 AWG stranded copper—33% smaller than standard 24 AWG cables—allowing integrators to pack more connections into tight patch-panel and top-of-rack switch scenarios without sacrificing Gigabit Ethernet or PoE++ performance. Each cord ships with RapidID pre-installed barcodes for automated port mapping, and the patented tangle-free latch cuts MAC cycle time by eliminating snags during extraction.

Key Features

• 28 AWG stranded copper construction — 0.150" (3.8 mm) diameter reduces bundle congestion by 33% vs. 24 AWG, improving airflow in shallow-depth racks and high-port-count panels
• 6-inch optimized length — purpose-built for panel-to-switch jumpers in compact IDF closets, security NOCs, and top-of-rack datacenter deployments where cable slack creates management problems
• Patented tangle-free latch — low-profile release tab prevents snagging on adjacent cables during moves, adds, and changes, reducing technician time per port by 15–30 seconds
• RapidID enabled — factory-applied barcode labels integrate with Panduit RapidID software for automated asset discovery, port mapping, and DCIM documentation without manual data entry
• 100% factory performance tested — every cord verified for wire map, NEXT, and return loss before shipment, eliminating field troubleshooting of bad crimps or miswires
• PoE++ bundle compliance — supports IEEE 802.3af/at (48 cables per bundle) and 802.3bt Type 3/4 (24 cables per bundle) without derating, critical for high-density IP camera and access-point installations

The TX6-28 series uses a centered de-embedded modular plug design with an integral pair manager that maintains twist geometry through the termination point, ensuring the cable exceeds ANSI/TIA-568.2-D Category 6 and ISO 11801 Class E electrical specs across the full 1–250 MHz spectrum. Stranded 28 AWG conductors provide the flexibility required for repeated flexing in high-churn environments—datacenter server provisioning, security system MAC events, AV rack reconfigurations—where solid-conductor patch cords would fatigue and fail. The U/UTP (unshielded twisted pair) construction delivers 1000BASE-T Gigabit Ethernet, 10GBASE-T (short-reach), and multi-rate ATM without the added bulk and termination complexity of shielded variants, while the CM/LSZH jacket meets both North American plenum-alternative and international low-smoke requirements for in-wall and above-ceiling pulls.

Bulk 48-pack packaging reduces per-port cost for large-scale deployments—IP camera networks requiring uniform 6-inch panel-to-PoE-injector jumpers, enterprise IDF closets with 200+ access-layer ports, or MSP datacenter builds where every rack needs identical short-run patch cords for inventory simplification. RapidID barcode integration feeds asset-management platforms (Nlyte, Sunbird, Device42) with physical-layer topology data, closing the documentation gap that typically emerges 6–12 months post-deployment when as-built diagrams no longer match reality. The tangle-free latch uses a recessed actuator and rounded edges to slide past adjacent cables during extraction, a design proven to cut technician hand time by 40+ hours annually in 500-port facilities where daily MAC activity is the norm.

Panduit's TX6-28 cords carry cULus Listing per UL 1863 and CAN/CSA-C22.2 No. 214 (File E129886) for communications-cable safety, and ship RoHS-compliant for EU and California installations. The 28 AWG design allows 48-cable bundles for IEEE 802.3af (15.4W) and 802.3at (30W) PoE without exceeding thermal limits, and supports 24-cable bundles for 802.3bt Type 3 (60W) and Type 4 (90W) applications—critical for integrators deploying PTZ cameras, multi-radio Wi-Fi 6E access points, or PoE-powered door controllers where a single under-spec bundle can throttle power delivery and cause intermittent device dropouts. Backed by manufacturer warranty, these cords eliminate the guesswork integrators face with no-name bulk patch cables that claim Cat 6 performance but fail verification testing in the field.