CyberPower
SKU: CP1000PFCLCD
Overview
CyberPower CP1500PFCLCD 1500VA/1000W PFC Sinewave UPS The CP1500PFCLCD delivers line-interactive battery backup with true sine wave output for desktop…
Manufacturer-verified compatible cameras, recorders, mounts, accessories, and licenses for this product. Adjust quantities and add the entire bundle to your cart in one click.
Overview
Questions about this product? Free pre-sales support from a senior specialist — product questions, compatibility checks, BOM quotes, price confirmation — typically answered within one business day. Need camera placement or system design work? Engineering time is $175 per hour (qty 1 = 1 hour). Hardware buyers get up to one hour ($175) credited back on their order.
The CP1500PFCLCD delivers line-interactive battery backup with true sine wave output for desktop workstations, network switches, NVRs, and access control panels running active PFC power supplies. Automatic Voltage Regulation corrects brownouts and overvoltage without draining the battery, while 1500VA/1000W capacity supports typical security workstation loads including a multi-monitor setup, PoE switch, and NAS. The multifunction color LCD provides real-time load monitoring, runtime estimates, and event logging—essential visibility for diagnosing power quality issues before they escalate into equipment damage or unplanned downtime.
Line-interactive topology with sine wave output solves the active PFC compatibility problem that trips simulated sine wave UPS units. Modern workstation and server power supplies use active power factor correction to meet efficiency regulations—these PSUs reject the stepped approximation waveform produced by cheaper UPS models, triggering nuisance shutdowns or refusing to draw power from battery altogether. The CP1500PFCLCD's pure sine wave inverter delivers the same clean AC waveform as utility power, ensuring full compatibility with Dell Precision workstations, HP Z-series, Lenovo ThinkStation, and enterprise-grade PoE switches from Cisco, Ubiquiti, and NETGEAR. You're not guessing whether the UPS will actually carry the load when the lights go out—sine wave output guarantees it.
Automatic Voltage Regulation extends usable runtime and reduces wear on the battery bank. AVR uses a buck-boost transformer to correct input voltage between 88-144 VAC without switching to battery—this matters in buildings with aging electrical infrastructure where voltage sags below 110V during HVAC startup or neighboring tenant load spikes. A non-AVR UPS switches to battery every time voltage dips below threshold, cycling the batteries multiple times per day and shortening their service life from 3-5 years down to 18-24 months. The CP1500PFCLCD only switches to battery during complete power loss, preserving battery cycles for true outages. The color LCD shows input voltage in real time, so you can document chronic power quality issues and make the case for dedicated circuit or voltage conditioning upstream.
Runtime planning for security workloads: at full 1000W load (100% capacity), expect 2.5 minutes—enough time to save open project files and initiate shutdown. At 500W (50% load), runtime extends to 10 minutes, covering typical scenarios like a dual-monitor workstation (200W), 16-port PoE switch with 8 cameras active (150W), and a 4-bay NAS (100W). If your workload regularly exceeds 800W, consider the CP1500PFCLCD as a bridge UPS to keep network infrastructure online while workstations handle their own shutdown, or step up to a 2200VA model for extended runtime on heavier loads. The six surge-only outlets are ideal for monitors, desk lamps, and phone chargers—devices that don't need runtime but benefit from surge protection and consolidated cable management.
Network protection via RJ45 Ethernet pass-through shields PoE switches and IP cameras from surge-induced failures. A direct lightning strike to the building service entrance sends high-voltage transients through both AC power and data lines—the CP1500PFCLCD's dual-stage surge suppression on AC outlets and the isolated Ethernet pass-through filter prevent thousands of dollars in equipment replacement. This is especially critical for installations where a single 24-port PoE switch feeds a dozen IP cameras; losing the switch means losing video coverage across the entire site until a replacement arrives. The USB charge ports (Type-A + Type-C) keep mobile programming tools online during outages—useful when you're onsite commissioning an access control system and the building loses power mid-flash.
The mini-tower form factor (3.9" × 11" × 14", 24.9 lb) fits under a desk or on a shelf in an IT closet without requiring rack rails. For integrators managing multiple sites, the optional RMCARD205 SNMP adapter enables centralized monitoring via PRTG, Nagios, or Zabbix—you'll receive alerts when a remote UPS switches to battery, when runtime drops below threshold due to aging batteries, or when a site experiences chronic overvoltage events that warrant a service call. PowerPanel software (included, free download) provides local monitoring and automated shutdown scripting for Windows, macOS, and Linux hosts. UL1778 and cUL 107.3 certification meets commercial building codes for UPS installations; ENERGY STAR qualification satisfies green building requirements; three-year warranty with $500,000 connected equipment guarantee covers replacement cost if surge damage occurs while properly connected—documentation you'll need when explaining to a client why you specified this unit over a consumer-grade UPS from a big-box store.
Manufacturer-verified compatible cameras, recorders, mounts, accessories, and licenses for this product. Adjust quantities and add the entire bundle to your cart in one click.
Looking for more CyberPower products? Shop the full CyberPower catalog →
Support services and planning resources for commercial surveillance, access control, and infrastructure deployments.
Fixed scope • Fixed price