APC by Schneider Electric 0M-5886-017 50A 250V 3-Pole 4-Wire 17ft Power Cordset
Overview
The APC by Schneider Electric 0M-5886-017 is a heavy-duty power cordset engineered for high-current UPS and PDU applications where a standard 15A or 20A cord simply won't cut it. Rated at 50 amps and 250 volts on a 3-pole, 4-wire configuration, this 17-foot cordset is the connection point between your facility's power distribution infrastructure and APC power equipment in data centers, large server rooms, and industrial installations. If you're commissioning or replacing power feeds on high-density UPS systems, the 0M-5886-017 (often searched as 0M 5886 017) is the factory-sourced cordset to spec — not a generic aftermarket substitute.
For engineers provisioning APC by Schneider Electric power distribution equipment, using the correct manufacturer-sourced cordset matters beyond simple compatibility: it maintains warranty integrity, ensures the terminations meet the rated ampacity, and eliminates the risk of undersized wiring at the most critical point in your power chain.
Key Features
- 50A Continuous Rating: At 50 amps, this cordset supports high-draw three-phase and single-phase 240V loads — the kind of ampacity required for larger UPS units and branch PDUs in enterprise and colocation environments. A 20A cordset on the same circuit would be a fire hazard; 50A gives you the full current capacity the upstream breaker and downstream equipment are designed to deliver.
- 250V Voltage Rating: The 250V rating covers standard North American 240V single-phase and 208V three-phase distribution without derating — you're not operating near the cord's voltage ceiling, which matters for long-term insulation integrity and heat management.
- 3-Pole 4-Wire Configuration: A 3P-4W wiring arrangement provides two hots, a neutral, and a ground — the correct topology for NEMA L14-series and equivalent 240V/250V circuits commonly found in data center power panels. This is a meaningful distinction from 3P-3W (no neutral) configurations; verify your PDU or UPS input socket and upstream outlet match before ordering.
- 17-Foot Length: At 17 feet, this cordset provides enough run to bridge the gap between a raised-floor power whip or wall receptacle and equipment mounted in a standard equipment rack or floor-standing UPS cabinet — without the voltage drop concerns of an excessively long high-current run.
- Factory-Sourced APC Component: This is a genuine APC by Schneider Electric cordset, not a field-fabricated substitute. Using the factory part preserves the power system's design intent and maintains traceability for audits or warranty service on the connected equipment.
- Commercial-Grade Construction: Cordsets at this ampacity rating require heavy-gauge conductors and robust connector terminations. This is not a consumer-grade power cord — it is sized and constructed for sustained 50A loads in always-on commercial and industrial power environments.
Integration & Compatibility
The 0M-5886-017 is designed as a replacement or spare cordset for compatible APC by Schneider Electric UPS systems and power distribution units that specify a 50A, 250V, 3P-4W input cord. Before ordering, confirm the input connector type and receptacle configuration on your specific APC equipment model — APC produces several cordset variants across different ampacities, voltages, and plug/connector types. If you are sourcing this for a new installation, cross-reference the cordset part number listed in the equipment's installation guide to confirm 0M-5886-017 is the correct variant for your unit.
For data center and network infrastructure deployments where uptime is non-negotiable, having a spare cordset on-site is worth considering. At 50A, the cordset is a load-bearing component in the power chain — sourcing a replacement during an outage under time pressure is the wrong moment to discover lead times.
If you are planning a broader power infrastructure refresh, review your UPS system cabling alongside this cordset to ensure the full power chain — from the panel breaker through the PDU to the load — is rated consistently at 50A.
Frequently Asked Questions
Q: What plug and connector type does the 0M-5886-017 use?
A: The source evidence does not specify the exact plug and connector configuration beyond the 3-pole 4-wire rating. Confirm the termination style against your APC equipment's installation guide before ordering.
Q: Is the 0M-5886-017 compatible with all APC UPS and PDU models?
A: No — APC produces multiple cordset variants. The 0M-5886-017 is a 50A, 250V, 3P-4W, 17-foot cordset. Compatibility depends on the input receptacle and rated ampacity of your specific APC equipment. Cross-reference the cordset part number in your equipment's documentation to verify before ordering.
Q: Can this cordset be used with non-APC power equipment?
A: Potentially, if the connector types, voltage, and ampacity ratings match your equipment. However, this cordset is factory-sourced from APC by Schneider Electric and is intended for use with compatible APC power systems. Verify connector compatibility and electrical ratings with a qualified electrician before deploying on non-APC equipment.
Q: What is the length of the 0M-5886-017?
A: The cordset is 17 feet long, providing sufficient reach for typical data center and server room installations where the power source and load equipment are within a standard rack bay or adjacent cabinet distance.
Q: Is a neutral wire included in the 3-pole 4-wire configuration?
A: Yes. A 3-pole 4-wire (3P-4W) configuration includes two hots, a neutral, and a ground — suitable for 240V/250V circuits requiring a neutral conductor. This differs from 3P-3W (no neutral) configurations, so verify your circuit type before installation.
When I spec replacement cordsets on high-density UPS refreshes, the first thing I lock down is the ampacity and wire configuration — and the 0M-5886-017 is the factory answer for APC equipment that requires a 50A, 250V, 3-pole 4-wire feed at 17 feet. Using the OEM cordset rather than a field-fabricated cable keeps the terminations within the original design spec and simplifies any future warranty or service conversation on the connected UPS or PDU.
Technical Highlights:
- 50A Continuous Ampacity: Sized for the full rated load of compatible high-draw APC UPS and PDU systems — the conductor gauge and terminations are built to sustain 50A continuously, not just surge.
- 3-Pole 4-Wire (3P-4W): Includes neutral and ground — correct for 240V/250V single-phase circuits that require all four conductors. Mismatching a 3P-3W cord here would leave you without a neutral return path on equipment that needs one.
- 17-Foot Run: Long enough to reach from a floor-level power whip or wall receptacle to rack-mounted or floor-standing APC equipment in a standard colocation cage or server room bay without daisy-chaining extension solutions.
Deployment Considerations:
- Verify the exact plug and connector face on your specific APC equipment model before ordering — APC's cordset catalog spans multiple termination types at the same ampacity, and the wrong connector is a non-starter at commissioning.
- At 50A, this circuit requires a dedicated 60A-rated breaker upstream (80% continuous load rule). If your panel is provisioned for only 30A or 40A, the cordset rating is irrelevant — you'll need to address the upstream circuit first.
The 0M-5886-017 is the right spec for colocation data halls and enterprise machine rooms where APC high-current UPS units are installed on dedicated 240V branch circuits and downtime during a cordset failure is simply not acceptable — keep a spare on the shelf.
