Panduit STP6X1.5MYL Cat 6A Shielded Patch Cord

The Panduit STP6X1.5MYL is a 1.5-meter Cat 6A S/FTP patch cord engineered for high-density 10GBASE-T deployments where electromagnetic interference and cable management are critical concerns. Built with 26 AWG stranded copper and full shielded/foiled twisted pair construction, this yellow jumper delivers certified 10 Gbps performance to 500 MHz while maintaining the flexibility needed for tight bend radii in congested rack environments. Commercial integrators spec this cord for data center top-of-rack switching, backbone aggregation links, and server virtualization clusters where both performance headroom and physical manageability matter. The CM/LSZH jacket rating makes it compliant for plenum-equivalent installations and sensitive environments where low-smoke toxicity is mandated.

Key Features

• Cat 6A performance: Exceeds ANSI/TIA-568.2-D and ISO 11801 Class EA to 500 MHz for 10GBASE-T Ethernet
• S/FTP shielded construction: Foiled pairs plus overall braid shield reject crosstalk and EMI in high-density racks
• 26 AWG stranded conductors: More flexible than 23 AWG solid-core patch cords, simplifies routing in zero-U cable managers and tight airflow spaces
• RapidID pre-installed barcodes: Scan-to-document workflow accelerates port mapping and change-order tracking via Panduit's RapidID software
• Tangle-free modular latch: Snag-resistant release mechanism reduces breakage during MAC work
• Slender strain relief boot: Low-profile design allows full port density on 48-port 1U patch panels
• PoE++ certified: Supports IEEE 802.3bt Type 4 (up to 100W) for high-power edge devices without dedicated power drops
• CM/LSZH rated: UL 1863 and CSA C22.2 listed with low-smoke zero-halogen jacket for code-compliant and low-toxicity installations
• 1.5 m / 4.9 ft length: Right-sized for rack-to-rack or adjacent-equipment connections without excess slack

The S/FTP construction uses individually foiled twisted pairs under an overall tinned-copper braid shield, bonded to a drain wire for 360° termination at both ends. This dual-layer approach provides better than 40 dB alien crosstalk rejection across the full Cat 6A spectrum, critical when bundling dozens of cables in zero-U vertical managers or horizontal cable trays. The 26 AWG stranded conductors reduce the minimum bend radius to roughly 4× cable diameter (versus 8× for solid-core), letting you navigate tight corners behind network switches or around power distribution units without kinking or performance degradation. Panduit rates this cord to exceed all ANSI/TIA-568.2-D Category 6A parameters from 1 to 500 MHz, with insertion loss, return loss, and NEXT margins that leave headroom for aging and thermal cycling over a 10+ year service life. The modular plugs are terminated under controlled factory conditions and tested to IEC 60603-7, ensuring sub-0.2 dB variance plug-to-plug—eliminating the field-termination quality lottery that kills link margins in contractor-assembled jumpers.

In hyperscale and enterprise data centers, the RapidID barcode system streamlines documentation during initial deployments and ongoing MAC work. Each cord ships with a scannable barcode label that integrates with Panduit's free RapidID software; scan both ends of a cable run to auto-populate port-to-port maps, cabinet layouts, and asset databases without manual spreadsheet entry. This cuts commissioning time and reduces human error in environments where a single miswired uplink can take down an entire rack. The yellow jacket provides high-visibility color coding for VLAN segregation, failover paths, or out-of-band management networks. The tangle-free latch uses a molded boot geometry that prevents snagging on adjacent cables during insertion or removal, and the slender 5.2 mm boot diameter allows full 48-port utilization on 1U patch panels where bulkier boots would block neighboring jacks. For PoE++ (802.3bt Type 4) applications, the 26 AWG stranded conductors support up to 100W delivery with acceptable voltage drop over 1.5 meters, making this cord suitable for powering 802.11ax access points, PTZ cameras, or LED lighting controllers without separate power infrastructure.

The CM/LSZH jacket meets UL 1863 and CAN/CSA-C22.2 flammability requirements and is RoHS compliant for REACH-regulated installations. The low-smoke zero-halogen formulation is preferred in occupied spaces, telecommunications rooms, and broadcast facilities where PVC combustion byproducts would pose toxicity or equipment-corrosion risks. Panduit's TX6A plug design is wired to be compatible with both T568A and T568B schemes, ensuring interoperability with mixed-vendor structured cabling without re-termination. This 1.5-meter length is the most common choice for switch-to-patch-panel jumpers, rack-to-rack cross-connects, and server-to-TOR (top-of-rack) links in standard 42U or 48U cabinets, minimizing cable slack that would obstruct airflow or complicate future moves.