Viking Compact IP Entry Phone with HD Video Textured Black Surface Mount - X-205-BK

Viking Electronics X-205-BK Compact IP Entry Phone with HD Video

The Viking Electronics X-205-BK is a surface-mount IP entry intercom built for commercial access points where you need SIP-based video calling, a rugged enclosure, and minimal PoE draw — all in a unit small enough to fit standard single-gang rough-in locations. At 5.75" x 3.08" x 1.05", it installs cleanly on door jambs, gate posts, and lobby panels without dominating the wall surface.

Overview

The X-205-BK (often searched as X 205 BK) combines HD video, two-way audio, and dry-contact relay control into a single SIP endpoint. The 16-gauge 304 stainless steel faceplate with textured black powder paint handles daily contact abuse without showing wear, while an impact-resistant polycarbonate camera window protects the optics in high-traffic entries. The unit streams simultaneously to a SIP video client and a separate NVR — a practical split that lets your access control and surveillance systems operate independently without additional encoders.

Key Features

• 1080p SIP Video Calling: H.264 and MJPEG encoding at up to 1080p means your security desk gets evidence-grade footage on video calls, not a blurry thumbnail. H.264 keeps bandwidth manageable on congested networks.
• 126° Wide Viewing Angle: Wide enough to cover a full doorway and both sides of a hallway approach — you see who is waiting before they announce themselves, which matters at unmanned entry points.
• Separate NVR Stream: The unit streams to your SIP video endpoint and a dedicated NVR simultaneously. No need to T-split or add a capture device; your VMS gets a continuous record independent of active calls.
• PoE Class 1 (<4W): Draws less than 4 watts via IEEE 802.3af — the lightest PoE class. A 24-port 802.3af switch can power 24 of these units without a single port budget concern. No separate power supply required.
• SIP 2.0 / RFC 3261 Compliant: Registers natively with any standards-compliant SIP PBX or hosted SIP platform. Integration with existing Cisco, Avaya, FreePBX, or cloud SIP environments requires no proprietary middleware.
• 2-Amp Relay Contacts: Onboard dry-contact relay at 2A handles electric strikes, magnetic locks, and gate controllers directly — no external relay module needed for most standard door hardware.
• Audio Codecs G.711u/a and G.722: G.722 wideband audio delivers noticeably cleaner voice clarity over G.711 narrowband — meaningful at noisy loading docks or outdoor entries where background noise competes with the caller's voice.
• -40°F to 140°F Operating Range: Rated for extreme cold and heat. Covered outdoor entries in northern climates or sun-exposed southern installations both fall within spec without requiring an enclosure heater.
• 1000BASE-T Network Interface: Gigabit network port future-proofs the installation — no bottleneck if you later push higher-resolution streams or add LLDP-based VLAN tagging on the switch port.
• 304 Stainless Steel with Textured Black Powder Coat: 16-gauge construction resists dents and corrosion; the textured black finish holds up to fingerprints and cleaning chemicals better than brushed metal at high-contact entry points.

Integration & Compatibility

The X-205-BK connects to any Viking Electronics SIP infrastructure or third-party SIP 2.0 platform. For facilities running a video IP intercom deployment across multiple entries, it pairs with Viking door controllers and SIP-capable access control panels. If you are evaluating PoE network switches to support the installation, the sub-4W draw means standard 802.3af ports are sufficient — no 802.3at budget required. Review the PoE planning guide to size your switch correctly across all endpoints. For recording, the independent NVR stream connects directly to any ONVIF-compatible network video recorder without disrupting active SIP sessions.

Frequently Asked Questions

Q: Does the X-205-BK require a separate power supply?

A: No. It runs on PoE Class 1, drawing less than 4W from any IEEE 802.3af-compliant switch port. No power injector or wall adapter is needed.

Q: Can the X-205-BK stream to both a SIP video phone and an NVR at the same time?

A: Yes. The unit supports a separate NVR stream concurrent with SIP video calling, so your surveillance recorder captures continuously regardless of active calls.

Q: What SIP platforms does the X-205-BK work with?

A: It is SIP 2.0 RFC 3261 compliant and registers with any standards-based SIP PBX — hosted or on-premise — including FreePBX, Cisco UCM, and similar platforms.

Q: What is the operating temperature range of the X-205-BK?

A: -40°F to 140°F (-40°C to 60°C), making it suitable for exposed outdoor entries in both extreme cold and high-heat climates.

Q: What door hardware can the onboard relay drive?

A: The relay contacts are rated at 2 amps, sufficient for most electric strikes, magnetic locks, and light-duty gate controllers without an external relay module.

Q: What is the viewing angle of the built-in camera?

A: 126 degrees, wide enough to cover a full doorframe and the immediate approach area on both sides.

Marty Allison

The spec I keep coming back to on the X-205-BK is the sub-4W PoE Class 1 draw. At a facility with 20 or 30 entry points, that difference between Class 1 and Class 3 devices adds up fast on your switch power budget — and here you get 1080p HD video and onboard relay control for less wattage than most IP cameras pull.

Technical Highlights:

• Dual-stream architecture: SIP video call and independent NVR stream run simultaneously — your access control team takes the call while surveillance gets a clean uninterrupted record, no encoder splitter required.
• 126° optics: Wide enough to frame a full doorway and the approach on either side in a single shot, which is the coverage geometry you need at single-door vestibule entries and gate kiosks.
• G.722 wideband audio: Noticeably better voice intelligibility than G.711 narrowband — at noisy loading docks or exterior entries with HVAC exhaust nearby, the difference in call clarity is real and reduces false denials at unmanned stations.

Deployment Considerations:

• The 5.75" x 3.08" x 1.05" footprint fits a standard single-gang surface box — confirm rough-in depth before ordering if mounting into an existing backbox, since the 1.05" depth is tight against some older cast-iron boxes.
• The EWP variant (X-205-BK-EWP) is the correct choice if the installation is fully exposed to rain or hose-down environments — the standard X-205-BK is rated to 95% non-condensing humidity indoors or under cover, not full wash-down.

This unit is the right fit for corporate lobby entries, gated parking facilities, and multi-tenant building intercom replacements where you need SIP registration, HD video record, and local relay control without pulling a separate power circuit to the door.