Comelit 1406 Simplebus 2-Wire Gateway with Licenses
Overview
The Comelit 1406 is a Simplebus 2-wire gateway engineered to integrate intercom and access control systems into unified deployment architectures. It sits at the intersection of legacy wire-based topologies and modern surveillance requirements — if your facility already runs Comelit intercom infrastructure and you need to add security integration without overhauling cabling, this is the bridge device. The 1406 includes software licenses with purchase, eliminating separate acquisition costs and accelerating deployment timelines. Designed for residential and light commercial environments where 2MP resolution meets coverage requirements and wire-based connectivity is preferred or already in place.
Key Features
- 2MP Resolution: Delivers 1920 × 1080 image quality suitable for identification and incident documentation in interior spaces — sufficient for hallways, entryways, and common areas but not for long-range perimeter or license-plate capture scenarios.
- Simplebus 2-Wire Integration: Native support for Comelit's proprietary 2-wire intercom protocol means you connect directly to existing Comelit hardware without protocol translation overhead. Reduces wiring complexity compared to parallel IP and analog systems.
- Included Software Licenses: Eliminates per-camera licensing fees or recurring software subscriptions — what you purchase covers the unit. Meaningful cost containment on multi-unit installations.
- Retrofit and New-Build Ready: Designed to integrate into existing Comelit intercom and access control deployments. If you are adding security monitoring to a facility with Simplebus infrastructure already in place, the 1406 connects to that backbone without requiring new wiring runs.
- Light Commercial Deployment Profile: Pitched at installations where security monitoring complements intercom and access — not high-threat or critical infrastructure environments requiring redundancy, failover, or multi-layer analytics.
- Gateway Architecture: Acts as a bridge between 2-wire Simplebus devices and broader system management — enables centralized monitoring and recording of intercom and access events alongside video.
Integration & Compatibility
The 1406 is engineered exclusively for Comelit Simplebus 2-wire intercom and access control systems. It does not support IP-native protocols (ONVIF, RTSP) natively and is not a general-purpose IP gateway. Compatibility is direct to Comelit's own product line — if your facility uses Comelit intercoms, door stations, or keypads, the 1406 provides the conversion and integration point. For network video recorder integration or third-party VMS platform support, verify that your chosen recorder or management software supports Simplebus 2-wire events and data feeds via the 1406's management interface.
This is a wired-topology device — it does not replace IP cameras or provide wireless connectivity. Its value lies in retrofitting security monitoring into facilities where Simplebus infrastructure is already deployed and wire-based integration is acceptable.
Deployment Considerations
The 1406 is best suited to facilities that (a) already operate Comelit intercom and access control, (b) have room on existing 2-wire runs, or (c) are willing to install dedicated 2-wire cabling to leverage the Simplebus architecture. If your facility is greenfield or you plan to migrate to IP-native cameras and management, a standalone IP-based intercom and camera system may reduce integration overhead and provide more analytics flexibility. Conversely, if your intercom system is mature and you need to add monitoring without disrupting operations, the 1406 integrates into that existing backbone.
What's in the Box
- Comelit 1406 Gateway Unit
- Included Software Licenses
Frequently Asked Questions
Q: Does the Comelit 1406 support ONVIF or RTSP streaming?
A: The 1406 is a Simplebus 2-wire gateway, not an IP-native device. It does not natively support ONVIF or RTSP. Its purpose is to bridge Simplebus 2-wire intercom and access control devices into a unified system. Third-party integration depends on your recorder or VMS vendor's support for Comelit Simplebus protocol conversion.
Q: Can I use the Comelit 1406 with non-Comelit intercom systems?
A: No. The 1406 is engineered exclusively for Comelit Simplebus 2-wire intercom and access control hardware. It is not compatible with other proprietary intercom systems or protocols.
Q: What is the maximum cable run length for the Simplebus 2-wire connection?
A: Refer to the product datasheet for maximum distance specifications. Simplebus 2-wire runs are typically limited by wire gauge and signal attenuation — verify your facility's cabling capacity before deployment.
Q: Are the included software licenses transferable?
A: License transferability depends on Comelit's licensing agreement. Review the included license documentation or contact the manufacturer's support team for transfer and reassignment policies.
Q: Is the 1406 suitable for outdoor installation?
A: The 1406 is designed for interior residential and light commercial environments. For outdoor or harsh-environment deployments, verify environmental ratings (temperature, humidity, IP rating) against your site conditions before commissioning.
Q: What recorder or VMS platforms integrate with the Comelit 1406?
A: Compatibility depends on the recorder or VMS vendor's support for Simplebus 2-wire protocol and Comelit integration modules. Verify with your selected platform vendor or Comelit's integration partners before purchase.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The Comelit 1406 is a niche integration device — not a surveillance camera or recorder, but a protocol bridge for facilities with mature Simplebus 2-wire intercom infrastructure. Its 2MP resolution sits at the resolution floor for modern security deployments, which tells you this is meant to complement intercom and access control, not replace dedicated IP cameras. The inclusion of software licenses removes a common friction point in multi-unit retrofits, but the real decision point is whether your facility's intercom cabling and topology can absorb the additional bandwidth and event load without degrading voice or access control performance.
Technical Highlights:
- 2MP Resolution (1920 × 1080): Adequate for event confirmation and basic identification in controlled indoor environments, but bandwidth and storage will be modest compared to 4MP or higher. The 1406 is not intended for forensic-grade imaging or long-range outdoor coverage.
- Simplebus 2-Wire Native Protocol: Direct integration into existing Comelit intercom and access control hardware eliminates protocol translation latency and complexity. However, this also means zero interoperability with other vendors — lock-in is absolute and by design.
- Included Licensing: Meaningful cost reduction on retrofit scenarios where you are adding the 1406 to an existing Simplebus deployment. No surprise per-camera or subscription fees during the first year of operation.
Deployment Considerations:
- The 1406 is strictly a retrofit integration device for existing Comelit shops. If your intercom system is third-party (Aiphone, Panasonic, etc.) or already IP-native, this device adds complexity rather than simplifying it. Choose based on what you already have, not based on future-proofing aspirations.
- 2-wire bandwidth is finite and shared across intercom, access control, and now video events. On large installations or facilities with heavy call traffic, you may experience performance degradation. Load-test the existing 2-wire infrastructure before scaling deployment across multiple 1406 units.
- Integration with third-party recorders or VMS platforms is not plug-and-play. Your chosen platform must explicitly support Simplebus 2-wire protocol via Comelit integration modules or API. This is a sales-engineering conversation, not a checkbox compatibility claim.
Deploy the 1406 where you have a mature Comelit Simplebus intercom system, modest resolution requirements (interior hallways, entry monitoring, access-control event documentation), and no plans to migrate to IP-native infrastructure in the next 3–5 years. For new-build facilities or those planning an IP migration, evaluate standalone IP intercom and camera systems — they simplify architecture and reduce vendor lock-in.
