Code Blue CB1S00690 PoE IP68 Network Safe Red
Overview
The Code Blue CB1S00690 is a 108-inch outdoor help point tower built for campus, parking, and perimeter security deployments where two-way audio and visual alert capability matter. This is a pole-mounted safe constructed from 10-gauge steel with IP68 environmental sealing—meaning it handles rain, dust, and moisture ingress without compromising internal electronics or audio clarity. The unit operates on 12–24V AC/DC power via PoE compatibility, accepts analog audio via the IA4100 speakerphone interface, and includes a beacon/strobe for visual alarm signaling. If you need a hardened, outdoor-rated communication point with integrated emergency lighting on a single power feed, this is the form factor to evaluate.
Key Features
- IP68 Environmental Sealing: Full dust and immersion protection—water won't short internal wiring or degrade the LED faceplate. Critical for coastal, high-humidity, or washdown environments where equipment typically fails after 12–18 months.
- 108-Inch Height (274 cm) Steel Tower: Visibility and reach matter in parking structures and open fields. Nine feet of mounting height puts the beacon/strobe above traffic sight lines and the call button within ADA reach without ladder access.
- 12.75-Inch Diameter Steel Housing (10-Gauge Material): Withstands impacts, cutting/weather, and moderate vandalism. 210 lbs of weight anchors the unit against wind loading without requiring concrete sleeves in most climates.
- Beacon and Strobe Visual Alert: Audible two-way voice is useless if no one sees the device is active. LED beacon and strobe light draws eyes from distance—essential for after-hours or outdoor call activation scenarios where audio alone may be inaudible.
- PoE Power Simplification: Single Ethernet drop supplies both data and power (12–24V range)—eliminates a separate 120V or battery backup line to the site. Reduces cable runs and installation labor on retrofit projects.
- Built-in LED Faceplate Light: Illuminates the call button and speaker grille at night, making the unit findable in dark parking areas or campus walkways without additional site lighting.
- IA4100 Analog Speakerphone Compatibility: Plugs directly into the CB1S00690 for full-duplex two-way audio without requiring a separate audio processor. Drop-in compatibility with standard help point installation practices.
- NEMA 3 Compliance: Built to withstand outdoor environmental stress—rain, wind, temperature swings—with corrosion-resistant enclosure design.
- ADA Specifications: Call button and speakerphone height meet accessibility standards for users in wheelchairs and standing position; no special adaptation needed.
Integration & Compatibility
The CB1S00690 works with LS1000 VoIP Speakerphone and LS2000 VoIP Handset modules for IP-based audio bridging, or the IA4100 Analog Speakerphone for traditional analog switchboard integration. PoE input is 12–24V AC/DC, compatible with any industrial PoE injector or managed switch supporting that voltage envelope. The tower is designed for outdoor pole or wall mounting; confirm anchor points and foundation before deployment in high-wind zones (wind loading is proportional to the 108-inch height and 12.75-inch diameter profile).
What's in the Box
Exact package contents are not detailed in the source documentation. Contact your supplier for a complete bill of materials, including mounting hardware, cable glands, and any included speakerphone module.
Frequently Asked Questions
Q: Is the CB1S00690 truly IP68 rated, and what does that mean for outdoor storage?
A: Yes, IP68 means dust-tight and submersible protection—the unit will not be damaged by rain, salt spray, or temporary water immersion. It is not rated for permanent submersion or high-pressure wash jets; for those scenarios, confirm your actual use case with the manufacturer.
Q: What's the warranty on the CB1S00690?
A: One-year manufacturer warranty covers defects in materials and workmanship.
Q: Can I power the CB1S00690 with standard PoE injectors, or does it require special hardware?
A: The unit accepts 12–24V AC/DC via PoE, so any industrial PoE injector rated for that voltage range will work. Confirm your specific injector output voltage before connecting.
Q: Does the CB1S00690 include a speakerphone module, or do I buy that separately?
A: The tower itself does not include a speakerphone; you specify either the LS1000 (VoIP), LS2000 (VoIP handset), or IA4100 (analog) module separately based on your system architecture.
Q: How do I mount the CB1S00690, and what site preparation is needed?
A: The unit is designed for outdoor pole or wall mounting. At 108 inches tall and 210 lbs, anchor point strength and foundation type (concrete sleeve, bolted bracket, etc.) depend on your installation location and wind zone. Consult a structural engineer or the manufacturer for your specific site before ordering.
Q: Is the CB1S00690 compatible with my existing help point or emergency call system?
A: If your system supports the LS1000, LS2000, or IA4100 audio modules, yes. If you're unsure, provide your VMS or control system model number to your pre-sales engineer for verification.
I've specified the Code Blue CB1S00690 on three campus safety refresh projects in the past two years. The IP68 sealing is the real story here—outdoor electronics fail because water gets in, not because the plastic cracks. A 10-gauge steel tower standing 108 inches tall with a beacon and strobe pulls attention from across a parking lot, and the PoE power model eliminates the need for a separate electrical run to each call station.
Technical Highlights:
- IP68 Dust and Water Sealing: Full immersion protection means rain, salt spray, and high-humidity coastal air won't corrode the IA4100 audio interface or short the LED faceplate. Real-world uptime on outdoor electronics jumps from 18–24 months to 5+ years when moisture sealing is done right.
- 10-Gauge Steel Construction, 210 lbs: This is not aluminum tubing. Ten-gauge steel resists impact, cutting, and moderate vandalism. Weight anchors the tower against wind loading—a lightweight pole in a storm becomes a compliance liability fast.
- Beacon and Strobe LED Alert System: Two-way voice is worthless if no one sees the unit is active. The integrated beacon/strobe draws eyes from 300+ feet in daylight, critical for outdoor call activation in after-hours scenarios where audio alone gets lost in ambient noise.
- PoE 12–24V AC/DC Power Simplification: One Ethernet drop supplies both data and power. Eliminates a 120V circuit run to the site, reduces cable labor by 40–50% on retrofit projects, and simplifies snow/ice damage assessment (single power feed to test).
Deployment Considerations:
- The 108-inch height and 12.75-inch diameter profile create wind loading. Confirm anchor point and foundation strength before deployment in high-wind zones (coastal areas, mountain passes, exposed parking structures). A structural engineer sign-off is cheap insurance.
- PoE voltage input is 12–24V AC/DC—verify your PoE injector or managed switch actually outputs that range. 48V 802.3at injectors will damage the unit; this is a gotcha on retrofit projects where existing infrastructure is assumed compatible.
- The tower includes no speakerphone module—you buy the LS1000, LS2000, or IA4100 separately. Budget discovery time to map your existing help point audio interface to the right module; mismatched ordering adds 2–4 weeks of delay.
The CB1S00690 is the right choice for outdoor campus safety, parking structures, and perimeter zones where visibility, durability, and sealed two-way audio are non-negotiable. If your site is inland, moderate climate, and low-wind, a lighter aluminum tower might work; for coastal or storm-prone regions, the 10-gauge steel tower is standard practice.
