Code Blue CB1E00378 IP68 PoE Ethernet Cable
Overview
The Code Blue CB1E00378 is an IP68-rated Ethernet cable designed for outdoor, underground, and harsh-environment network installations where sealed connectors and integrated power delivery are non-negotiable. IP68 rating means this cable survives submersion and sustained dust exposure — deploy it in wet mechanical rooms, below-grade cable runs, and field cabinets without worrying about moisture ingress at the connector. The integrated PoE (802.3af) support delivers up to 13W directly through the cable to field devices, eliminating the need for separate power infrastructure at the remote end. M12 connector design provides positive mechanical locking and weatherproof sealing, critical for integrators managing long cable runs in uncontrolled environments.
Compatibility
This cable integrates with Code Blue Help Point Tower systems (CB1e SBL series) and any standard PoE-enabled network infrastructure supporting 802.3af delivery. Compatible with edge cameras, access control nodes, industrial sensors, and networked intercoms operating on PoE power budgets under 13W. Works with M12 receptacles in cabinet installations, outdoor junction boxes, and field-mounted enclosures. Verify your switch or PoE injector output voltage (typically 48V DC) matches your remote device input specification; consult device datasheets for power compatibility before final installation.
Installation Notes
Ensure all M12 connectors are fully seated and hand-tightened until positive — under-torqued connectors introduce intermittent connectivity and power loss in the field. Route cable away from sharp edges and moving machinery; use cable conduit or spiral wrap in mechanical spaces to prevent abrasion. IP68 rating assumes connectors remain sealed; exposing internal pins or leaving connectors partially mated compromises water resistance. Verify the cable length you select supports your run distance plus 10% slack for strain relief loops — ethernet performance degrades beyond 300 feet regardless of cable rating. Test PoE power delivery at the device before final commissioning using a multimeter or PoE meter to confirm 12–24V DC at the load.
