Panduit UTP6AX8OR TX6A 10Gig Cat 6A UTP Patch Cord - 8 Foot, Orange
The Panduit TX6A UTP6AX8OR delivers 10Gig Ethernet performance in an 8-foot, orange-jacketed patch cord engineered for high-density datacenter and telecom installations. Built with 24 AWG solid conductors and solid foil tape shielding, this Cat 6A UTP cord mitigates alien crosstalk in tightly bundled runs while supporting PoE++ (802.3bt Type 3 and Type 4) power delivery up to 90W. The tangle-free latch design prevents snags during moves, adds, and changes in crowded patch panels, and pre-installed RapidID barcodes streamline port mapping and circuit documentation without manual labeling.
Key Features
- 10Gig Cat 6A Performance: Exceeds ANSI/TIA-568.2-D Category 6A and ISO 11801 Class EA specifications for 10GBASE-T Ethernet over copper
- Alien Crosstalk Mitigation: Solid foil tape construction limits interference in high-density bundle environments where multiple patch cords run in parallel
- Tangle-Free Latch: Low-profile, snag-resistant latch design enables fast release and prevents cable damage in tight routing paths
- RapidID Enabled: Pre-installed barcodes integrate with Panduit RapidID software for automated port mapping, circuit tracing, and asset management workflows
- PoE++ Ready: Rated for IEEE 802.3af, 802.3at, and 802.3bt Type 3 & Type 4 power delivery—supports up to 90W for modern IP cameras, wireless access points, and IP building controls
- 24 AWG Solid Conductor: Solid copper construction provides lower DC resistance and better alien crosstalk performance than stranded equivalents in permanent-link and cross-connect applications
- 2500 Mating Cycles: Rated for 2500 insertion/extraction cycles, exceeding standard patch cord durability for frequently reconfigured circuits
- Orange Jacket: High-visibility orange PVC jacket simplifies color-coded circuit identification in multi-tenant, multi-application, or segmented network deployments
The UTP6AX8OR uses Panduit's TX6A modular plug system with 24 AWG solid, unshielded twisted pair conductors arranged in a U/UTP (unshielded cable, unshielded pairs) configuration. The 0.250-inch (6.4mm) overall diameter balances flexibility with alien crosstalk performance: solid foil tape within the cable assembly isolates each pair from external electromagnetic interference, critical when dozens of patch cords occupy the same cable management tray or ladder rack. This construction meets ANSI/TIA-1096-A (formerly FCC Part 68) and IEC 60603-7 modular interface standards, ensuring reliable termination with any compliant RJ45 jack. The CM (Communications) flammability rating satisfies horizontal-run and riser plenum bypass requirements under NEC Article 800, though dedicated riser or plenum variants are recommended for vertical shaft or air-handling spaces.
In high-density datacenter aggregation layers and IP surveillance headend installations, cable management complexity scales exponentially with port count. The UTP6AX8OR's tangle-free latch reduces the force required to extract a cord from a 48-port patch panel by approximately 30% compared to standard boot designs, minimizing accidental disconnects of adjacent circuits. RapidID barcodes—laser-etched directly onto the cord's boot—eliminate the need for handwritten labels or wrap-around tags that degrade or fall off during service life. Scanning the barcode with Panduit's RapidID mobile app or handheld scanner automatically logs the cord's serial number, length, category rating, and installation location into a centralized asset database, enabling real-time circuit tracing, MAC (moves/adds/changes) audit trails, and compliance reporting for TIA-606-B infrastructure documentation standards. For deployments powering 802.3bt Type 4 devices—such as PTZ IP cameras with integrated IR illuminators and heaters, or 4×4 MU-MIMO Wi-Fi 6E access points—the cord's 2500-cycle durability and PoE++ power rating ensure stable operation even when circuits are reconnected during phased upgrades or troubleshooting.
The UTP6AX8OR exceeds ANSI/TIA-568.2-D Category 6A and ISO/IEC 11801 Class EA performance requirements across the full 1–500 MHz frequency range, supporting 10GBASE-T Ethernet, HDBaseT 2.0 (up to 100m for 4K video + USB + control), and NBASE-T Multi-Gig (2.5G/5G) applications without deration. UL 1863 listing and RoHS compliance confirm third-party verification of flammability performance and hazardous-substance restrictions. Every cord ships individually bagged with a carton quantity of 10 for bulk installations. Backed by Panduit's manufacturer warranty, this patch cord is purpose-built for IT/datacenter professionals and system integrators deploying converged IP infrastructure where 10Gig throughput, PoE++ power, automated documentation, and long-term durability are non-negotiable.
