Panduit UTP6AX6RD Cat 6A UTP Patch Cord
The Panduit UTP6AX6RD delivers 10 Gbps performance in a 6-foot Cat 6A unshielded twisted pair patch cord. Engineered for high-density data center environments where 10GBASE-T Ethernet, server virtualization, and backbone aggregation demand reliable connectivity, this red TX6A™ cable combines 24 AWG solid copper construction with a 0.250-inch diameter profile that simplifies cable management in crowded racks. RapidID pre-installed barcodes and a tangle-free latch design reduce installation time and eliminate the cable snags that slow MAC operations.
Key Features
- 10 Gbps transmission up to 500 MHz exceeding ANSI/TIA-568.2-D Category 6A standards
- 24 AWG solid copper conductors in U/UTP construction for consistent signal integrity
- Tangle-free modular plug latch prevents snags during installation and removal
- RapidID embedded barcodes enable one-scan port documentation with Panduit software
- Red jacket for visual circuit identification in multi-service pathways
- CM flammability rating for commercial building compliance
- Supports IEEE 802.3af/at/bt PoE (Type 3 and Type 4) for powered devices
- Compatible with T568A and T568B wiring schemes
The TX6A™ platform addresses the alien crosstalk challenge inherent in 10GBASE-T deployments. Solid foil tape shielding within the cable structure isolates each pair from interference caused by adjacent cables in bundle or tray installations. This construction enables full-bandwidth performance even in the dense 48-port top-of-rack switch environments common in virtualized server farms. The 24 AWG solid conductor specification balances flexibility for tight-radius turns with the mechanical stability required for permanent horizontal links, making this patch cord suitable for both equipment-to-patch-panel connections and longer cross-connect runs within telecommunications rooms.
RapidID integration transforms a manual, error-prone port labeling process into a scannable asset management system. Each cord ships with a machine-readable barcode that links to Panduit's RapidID software, allowing installers to map physical ports to logical network addresses in real time. The tangle-free latch mechanism uses a reinforced boot geometry that prevents the release tab from catching on neighboring cables when pulling or repositioning cords in vertical cable managers. For large-scale data center builds or enterprise office retrofits where hundreds of patch cords are deployed per rack, these features measurably reduce labor hours and callback rates for documentation errors or damaged connectors.
Exceeds ANSI/TIA-568.2-D Category 6A and ISO 11801 Class EA performance across all frequencies from 1 to 500 MHz. Meets ANSI/TIA-1096-A, IEC 60603-7, UL 1863, and CAN/CSA-C22.2 requirements (UL File E129886). Fully supports IEEE 802.3bt Type 3 and Type 4 Power over Ethernet for 60W and 90W powered device installations including PTZ cameras, Wi-Fi 6E access points, and LED lighting controllers. RoHS compliant. Carton quantity of 10 cords optimizes bulk purchasing for multi-rack deployments while maintaining individual barcode traceability per cord.
