Panduit UTP6AX29YL Cat 6A Patch Cord 29ft Yellow

Panduit UTP6AX29YL TX6A 10Gig Cat 6A Patch Cord

The Panduit TX6A 10Gig UTP6AX29YL delivers 10GBASE-T performance in a 29-foot Cat 6A patch cord designed for high-density datacenter and enterprise network deployments. Built with 24 AWG solid copper conductors in a 6.4mm U/UTP cable assembly, this yellow patch cord features factory-terminated modular plugs rated for 2,500 mating cycles and full PoE++ power delivery. The integrated RapidID barcode system enables automated port mapping and asset tracking in structured cabling installations where change-order documentation and MAC workflow efficiency directly impact operational costs.

Key Features

• 10Gb/s transmission over 29 feet (8.84m) certified to ANSI/TIA-568.2-D Category 6A and ISO 11801 Class EA
• 24 AWG solid copper U/UTP construction with alien crosstalk mitigation for multi-cable bundle deployments
• Tangle-free latch design prevents snags during cable routing and ensures one-hand release in tight spaces
• Pre-installed RapidID barcode for integration with Panduit RapidID port mapping and labeling software
• PoE++ compatible: IEEE 802.3af, 802.3at, and 802.3bt Type 3 (60W) and Type 4 (100W) rated
• 2,500-cycle connector durability specification exceeds typical enterprise patching environment requirements
• CM flammability rating for general building installations

The TX6A series uses 24 AWG solid copper conductors in an unshielded twisted-pair configuration with precision-tuned pair geometry to suppress alien crosstalk—the dominant performance limiter in dense Cat 6A deployments. Unlike stranded patch cords optimized for flexibility, this solid-conductor design maintains tighter impedance control and lower insertion loss over the 29-foot length, making it suitable for longer horizontal runs or consolidation-point-to-switch connections where stranded cords would exceed attenuation budgets. The 6.4mm overall diameter represents a balance between bend radius and bundle density; smaller than shielded Cat 6A alternatives while maintaining the pair separation needed for 500 MHz channel performance. Each connector is factory-terminated with Panduit's high-performance modular plug, eliminating field termination variability and providing a plug-to-plug channel rating that meets ANSI/TIA-1096-A and IEC 60603-7 mechanical and electrical requirements.

In datacenter top-of-rack and access-layer switching environments, the 29-foot length accommodates ladder-routed cable paths from mid-rack switches to servers in adjacent racks or overhead cable trays, a common scenario in hot-aisle containment layouts where direct vertical drops are impractical. The tangle-free latch—Panduit's strain-relief boot with integrated latch protection—addresses the persistent problem of latch breakage during MAC operations in congested patch panels; the design allows installers to route bundles through dense 48-port panels without the boot catching on adjacent ports or cable managers. RapidID integration is significant in change-heavy environments: each cord ships with a machine-readable barcode that populates Panduit's port mapping database, enabling technicians to scan both ends of a connection and auto-generate as-built documentation without manual spreadsheet updates. This workflow cuts MAC labor cost on large switch refreshes where documenting 200+ port moves manually can consume hours of billable time.

Yellow jacket color follows TIA-606-C administration standards for specific network segments, typically auxiliary equipment or PON distribution in enterprise deployments. The cord's PoE++ Type 4 rating (100W delivery per IEEE 802.3bt) future-proofs installations for high-power PoE devices—PTZ cameras with heaters, multi-radio access points, and LED lighting controllers—without requiring separate power circuits or mid-span injectors. Certified to exceed ANSI/TIA-568.2-D Category 6A and ISO 11801 Class EA transmission requirements, the UTP6AX29YL provides verifiable 10GBASE-T headroom at 29 feet with measured NEXT, PSANEXT, and alien crosstalk margins that pass Fluke DTX or DSX-8000 field certification, eliminating the \"works today but fails certification\" scenario that occurs with non-compliant import cords.