Panduit UTP6AX17YL Cat 6A UTP Patch Cord

The Panduit UTP6AX17YL is a 17-foot Cat 6A UTP patch cord engineered for 10GBASE-T networks in enterprise, datacenter, and commercial security installations. Part of the TX6A 10Gig family, this yellow-jacketed cable uses 24 AWG solid copper conductors and high-performance modular plugs to deliver reliable 10 Gb/s transmission over distances up to 100 meters. The 0.250-inch diameter profile with tangle-free latch design simplifies cable management in high-density racks, while pre-installed RapidID barcodes enable automated port mapping and asset tracking. Rated for 2,500 mating cycles and compatible with PoE++ (802.3bt Type 3/4), this patch cord meets the demands of IP cameras, access points, and high-power edge devices.

Key Features

• Cat 6A 10GBASE-T certified for 10 Gb/s transmission up to 100 meters
• 17-foot (5.18 m) length with 24 AWG solid copper conductors
• Tangle-free latch prevents snags during deployment and moves
• RapidID barcode integration for automated port mapping and asset tracking
• PoE++ compatible (IEEE 802.3bt Type 3 and Type 4 up to 100W)
• Exceeds ANSI/TIA-568.2-D Cat 6A and ISO 11801 Class EA requirements
• 2,500-cycle durability rating for high-traffic patching environments
• 0.250-inch (6.4 mm) diameter for flexible routing in dense rack enclosures

The UTP6AX17YL uses unshielded twisted pair (U/UTP) construction with solid foil tape shielding to limit alien crosstalk (AXT) while maintaining the flexibility advantages of UTP cabling. Unlike stranded-conductor patch cords that can degrade at terminations, the 24 AWG solid copper design ensures consistent impedance and insertion loss across the full 17-foot run. The high-performance RJ45 plugs meet IEC 60603-7 and ANSI/TIA-1096-A specifications, with gold-plated contacts rated for 2,500 mating cycles—critical for environments where patch panels see frequent reconfiguration during adds, moves, and changes. The CM-rated jacket meets NEC Article 800 requirements for general-purpose horizontal and riser applications, suitable for commercial security and IT installations.

In IP security and AV deployments, the 17-foot length bridges typical rack-to-patch-panel distances while minimizing excess cable bulk in 42U and 48U enclosures. The tangle-free latch design uses a molded snagless boot that prevents hook-and-loop pile snags and accidental disconnections during service—a common failure point in dense surveillance NVR and PoE switch deployments. RapidID barcodes printed on the plug body integrate with Panduit's RapidID software for automated port documentation, eliminating manual cable labeling and reducing commissioning time on multi-building campuses and distributed surveillance networks. The yellow jacket follows TIA-606-B administration standards for visual network segmentation, often assigned to security VLANs, guest networks, or dedicated camera subnets in converged infrastructure.

Panduit's TX6A patch cords carry a performance guarantee backed by independent third-party testing to ANSI/TIA-568.2-D Category 6A and ISO 11801 Class EA alien crosstalk limits. The PoE++ compatibility (802.3bt Type 3/4) supports up to 100W power delivery to high-wattage PTZ cameras, multi-radio Wi-Fi 6E access points, and LED lighting controllers without supplemental power injection—critical for perimeter installations and outdoor enclosures where AC outlets are scarce. For integrators managing mixed-vendor cabling plants, the UTP6AX17YL provides a vendor-neutral upgrade path that maintains backward compatibility with Cat 5e and Cat 6 infrastructure while future-proofing for 10GBASE-T, NBASE-T (2.5/5 Gb/s), and emerging multi-gigabit endpoints.