Panduit UTP6AX26OR 10Gig Cat 6A 26 ft Patch Cord Orange

Panduit UTP6AX26OR TX6A 10Gig Cat 6A Patch Cord

The Panduit TX6A UTP6AX26OR delivers certified 10GBASE-T performance in a 26-foot U/UTP patch cord engineered for high-density switching environments. Built on 24 AWG solid conductor cable with integrated solid foil tape shielding, this Cat 6A cord suppresses alien crosstalk to IEEE and TIA specifications while maintaining the 0.250-inch (6.4mm) diameter required for efficient cable management in congested rack pathways. RapidID pre-installed barcodes enable instant port mapping via Panduit's RapidID software, eliminating manual documentation errors during moves, adds, and changes. Orange jacket provides rapid visual identification in multi-VLAN or segmented network architectures.

Key Features

• Certified 10 Gb/s transmission over full 100-meter permanent link per ANSI/TIA-568.2-D Category 6A and ISO 11801 Class EA
• Solid foil tape construction limits alien crosstalk (AXT) in bundled cable runs without the diameter penalty of F/UTP or S/FTP shielded designs
• Tangle-free latch design prevents snag-induced port damage and streamlines rapid deployment in dense switch fabrics
• RapidID barcode system pre-installed for asset tracking and automated port mapping via Panduit RapidID software
• IEEE 802.3bt Type 3 (60W) and Type 4 (100W) PoE++ compliant—delivers full power budget to 802.11ax access points, PTZ cameras, and high-power endpoints
• Rated for 2,500 insertion cycles per IEEE 802.3af/at/bt—exceeds standard 750-cycle modular plug requirement by 3.3×
• 24 AWG solid copper conductor maintains DC resistance under 9.38 Ω/100m for predictable PoE voltage drop calculations
• Orange CM-rated jacket meets NEC Article 800 for horizontal cable applications in commercial spaces

The UTP6AX26OR uses U/UTP (unshielded twisted pair) construction with a solid foil tape shield layer applied beneath the outer jacket. This architecture provides alien crosstalk mitigation approaching that of F/UTP designs while preserving the reduced outer diameter critical for maintaining airflow in front-to-rear cooled network chassis and high-density patch panels. The 24 AWG solid conductor—larger than the stranded 26 AWG wire used in economy patch cords—reduces DC loop resistance to 9.38 Ω per 100 meters, ensuring that PoE++ Type 4 endpoints receive at least 71.3W at the powered device interface even when the permanent link approaches the 100-meter maximum. Panduit's high-performance modular plugs meet IEC 60603-7 contact geometry requirements and are rated for 2,500 mating cycles under IEEE 802.3bt load conditions, making this cord suitable for test equipment and portable device connections that see frequent reconnection.

In data center and enterprise switching environments running 10GBASE-T to the desktop or 10G uplinks to aggregation switches, the UTP6AX26OR solves the alien crosstalk challenge that forces many installers toward expensive shielded cabling systems. The solid foil tape layer attenuates electromagnetic interference between adjacent cables in the same bundle without requiring bonded infrastructure ground planes or shielded patch panels. This is particularly valuable in retrofit installations where grounding infrastructure may not exist or where maintaining shield continuity across modular plug connections introduces unacceptable labor cost. The 26-foot length bridges typical top-of-rack switch to mid-rack server connections or handles cross-aisle patch panel to switch runs in hot-aisle/cold-aisle layouts. RapidID barcodes—laser-etched onto the plug boot—integrate with Panduit's RapidID mobile app to create an auditable port map during commissioning, eliminating the \"ghost cable\" problem where undocumented patch cords defeat change management procedures during later MAC operations.

Conformance to ANSI/TIA-568.2-D Category 6A (500 MHz) and ISO/IEC 11801 Class EA ensures compatibility with existing structured cabling infrastructure certified to these standards. The cord meets ANSI/TIA-1096-A (formerly FCC Part 68) registration requirements for connection to telecommunications networks, and UL 1863 listing confirms that flammability and electrical safety requirements are met for the CM rating. RoHS compliance eliminates lead, mercury, and restricted flame retardants from the manufacturing process, meeting EU and California supply chain requirements for organizations with global procurement policies. The combination of standards compliance, 2,500-cycle durability rating, and PoE++ power handling makes this patch cord a field-proven choice for mission-critical 10 Gb/s network infrastructure where cable-induced downtime carries measurable operational cost.