Panduit UTP6AX19GR Cat 6A UTP Patch Cord 19 ft Green

Panduit UTP6AX19GR TX6A 10Gig Cat 6A UTP Patch Cord - 19 ft., Green

The Panduit TX6A UTP6AX19GR delivers 10GBASE-T performance in a 19-foot green patch cord engineered for high-density datacenter and enterprise backbone applications. Built with 24 AWG solid copper conductors in a 0.250-inch unshielded twisted pair construction, this Cat 6A cord maintains alien crosstalk margins that exceed ANSI/TIA-568.2-D and ISO 11801 Class EA requirements. The tangle-free latch design eliminates snags during moves, adds, and changes, while factory-installed RapidID barcodes enable automated port mapping and asset tracking via Panduit's RapidID software platform.

Key Features

• Cat 6A UTP construction with 24 AWG solid copper conductors for 10 Gb/s transmission up to 100 meters
• Exceeds ANSI/TIA-568.2-D Category 6A and ISO 11801 Class EA alien crosstalk performance standards
• Tangle-free modular plug latch prevents cable snags and speeds MAC operations in high-density racks
• Pre-installed RapidID barcode labels for automated port mapping and asset documentation
• Supports IEEE 802.3af/at PoE and 802.3bt PoE++ (Type 3 and Type 4) up to 100W
• Rated for 2,500 insertion cycles per IEC 60603-7, exceeding typical enterprise lifecycle requirements
• CM (communications) flammability rating for general horizontal cable runs per NEC Article 800
• 19-foot (5.79 m) length bridges typical rack-to-patch-panel distances in structured cabling

Panduit's TX6A platform uses a U/UTP (unshielded twisted pair) architecture with precision pair geometry to control alien crosstalk—the interference between adjacent cables in high-density bundles. The 24 AWG solid copper conductors maintain lower DC loop resistance than stranded alternatives, reducing insertion loss and power dissipation on long PoE runs. The 0.250-inch overall diameter balances bend radius requirements against bundle fill density; you can terminate six of these cords in a standard 1U horizontal cable manager without exceeding the manufacturer's minimum bend radius. The green jacket color-codes network segments per TIA-606-B administration standards, simplifying visual tracing in mixed-protocol environments.

The factory-terminated RJ45 modular plugs meet ANSI/TIA-1096-A (formerly FCC Part 68) and IEC 60603-7 contact geometry specs, ensuring consistent 50-microinch gold plating on all eight positions. Panduit's tangle-free latch uses a low-profile boot that deflects around adjacent cords rather than hooking during extraction—critical when you're working 20+ connections in a 42U rack under time pressure. The pre-installed RapidID barcode integrates with Panduit's port-mapping software to auto-populate switch port inventories during commissioning; scan the cord at both ends and the software logs the physical layer connection without manual data entry. For PoE deployments, the 2,500-cycle plug rating covers the full service life of IEEE 802.3bt Type 4 (100W) installations, including the thermal cycling and contact wear from continuous power delivery.

This cord is UL 1863 listed for communications cable assemblies and meets RoHS material restrictions for EU and California installations. The CM flammability rating qualifies it for use in general building spaces per NEC Article 800; for plenum air-handling spaces you'll need Panduit's CMP-rated equivalent. The 19-foot length is optimized for top-of-rack switch connections in typical 42U cabinet layouts—sufficient slack for cable management arms and service loops without excess bundling. Panduit ships these cords in cartons of 10, supporting bulk deployments where you're patching an entire switch stack or converged infrastructure pod in a single maintenance window.