Panduit CJLR6X88TGEI Cat 6A 45° Angled TG Jack Module

Panduit CJLR6X88TGEI Mini-Com Cat 6A UTP RJ45 Jack Module

The Panduit CJLR6X88TGEI addresses a persistent cabling challenge in high-density network installations: routing Cat 6A cable into shallow wall boxes, tight equipment racks, and behind-panel spaces where standard straight-exit jacks create sharp bend-radius violations. This 45° angled Mini-Com jack module redirects cable exit left or right at installation, improving bend compliance in constrained enclosures while maintaining full Category 6A channel performance. Tool-less TG termination eliminates punch-down tools and speeds deployment on large campus or datacenter projects where hundreds of jacks are terminated in a single shift.

Key Features

• 45° angled cable exit (left/right orientation) optimizes routing in shallow boxes and high-density patch panels
• Tool-less TG termination — insert 22-26 AWG conductors without punch-down tool, reducing install time and equipment cost
• Exceeds ANSI/TIA-568.2-D and ISO 11801 Cat 6A component and channel requirements, verified through 100% factory testing
• Supports IEEE 802.3bt Type 3 and Type 4 PoE++ applications (up to 90W) for high-power IP cameras, access points, and lighting controllers
• 2,500 mating cycles rated for patch-heavy environments (network closets, test benches, temporary event cabling)
• Individually serialized for asset tracking, warranty claims, and post-install traceability in compliance-driven projects
• Electric ivory housing integrates with standard wall plates and modular panels in commercial office and healthcare environments
• UL 1863 and UL 2043 plenum-rated, RoHS compliant

The TG (tool-less grip) termination system uses a lever-actuated contact block that pierces and grips conductors when closed, eliminating the inconsistency and hand fatigue associated with impact punch-down tools. Installers strip the cable jacket, untwist pairs to the color-coded wiring diagram, insert conductors into the terminal slots, and close the cap — termination is complete in under 30 seconds per jack. The angled exit body maintains the 45° orientation regardless of mounting position, so cable routes cleanly toward the top, bottom, or side of the enclosure without inducing bend-radius stress. This design is critical in retrofit projects where existing boxes have limited depth (less than 2.5 inches) or in modular furniture installations where cables must turn immediately behind the faceplate. The module passes 500 MHz bandwidth requirements with margin, supporting 10GBASE-T Ethernet over the full 100-meter channel and providing headroom for future standards. PoE++ Type 4 support allows deployment of high-power devices — PTZ cameras drawing 60W, 802.11ax access points, PoE lighting — without separate power drops, reducing installation labor and improving flexibility in open-plan offices and warehouses.

The Mini-Com modular form factor ensures compatibility with Panduit's extensive line of patch panels, surface-mount boxes, angled adapters, and multi-port faceplates, creating a unified structured cabling system across a facility. Each jack's unique serial number enables precise documentation in cable management databases (DCIM, CMDB) and simplifies troubleshooting when a specific drop underperforms or fails certification — the serial ties the installed jack to its factory test report and manufacturing lot. Electric ivory is the standard color for commercial-grade network infrastructure in office, education, and healthcare environments where visible cabling must blend with light-colored walls and trim. The module's 0.71" width fits standard single-gang and double-gang boxes, and the snap-in retention clips hold securely in Panduit frames without screws, speeding moves/adds/changes in dynamic tenant spaces.

This jack is engineered for integrators running Cat 6A to IP surveillance networks, access control panels, and distributed PoE infrastructure in mid-rise commercial buildings and campus environments where cable routing constraints would otherwise force costly box replacements or code-violating bend-radius compromises. The combination of angled exit, tool-less termination, and factory-verified 10G performance makes the CJLR6X88TGEI the correct solution when standard jacks won't fit the physical or schedule constraints of the project.