Vertiv 29607 Basic 20A 6-Outlet 1U Horizontal Rackmount PDU
Overview
The Vertiv BRN060-1023 (part number 29607) is a no-frills, production-tested rack power distribution unit designed for IT and security infrastructure where reliable power delivery matters more than remote monitoring. Rated at 20A/120V (1.9kW), it delivers six NEMA 5-20R receptacles in a 1U horizontal chassis — straightforward power for NVRs, network switches, access control panels, and similar always-on rack equipment. Every unit ships 100% factory-tested, TAA compliant, and backed by a 5-year limited warranty — meaningful in government, defense, and commercial deployments where procurement rules and lifecycle cost both matter. If you're building out a network video recorder rack or a security infrastructure cabinet and need dependable power distribution without the overhead of metered or switched PDU management, the BRN060-1023 is the starting point.
Key Features
- 20A / 1.9kW Capacity: A 20A circuit feed means you can realistically load this PDU to 16A continuous (80% NEC derating) — enough headroom for a mid-density NVR + switch + access control panel combination without tripping the breaker. Plan your connected load against that 16A working ceiling, not the 20A nameplate.
- Six NEMA 5-20R Duplex Receptacles: All six outlets are rear-mounted in duplex configuration, which keeps cable runs short and organized inside a standard 4-post rack. The 5-20R receptacle accepts both standard 5-15P and 5-20P plugs — useful when mixing equipment with different plug types on the same PDU without adapters.
- 20A Thermal Circuit Breaker: Built-in over-current protection trips on sustained overloads and resets manually — no fuses to stock, no service call needed to restore power after an overload event. For a security operations environment, that means a fast recovery without waiting for an electrician.
- 10 ft Power Cord with 5-20P Plug: The 10-foot, 12/3 AWG cord gives you enough slack to reach a floor-mounted PDU or a wall receptacle without a cord management headache. The 12-gauge wire is appropriately sized for a sustained 20A load — this isn't undersized infrastructure.
- 1U Horizontal Rackmount, Flush-Mount Capable: At 1.72 in × 17 in × 3.75 in, the BRN060-1023 occupies a single rack unit and flush-mounts cleanly. The 483mm width fits standard 19-inch EIA racks and cabinets. At 6 lbs, it won't stress a rail kit or cantilever mount.
- Power-On Green LED Indicator: A single green LED confirms the unit is energized — simple, unambiguous status visible when you're working in the back of a cabinet. No display to fail, no firmware to update.
- TAA, Buy American Act, and RoHS Compliant: The USA country of origin plus TAA and Buy American Act COTS compliance makes the 29607 a viable procurement option for federal agencies, DOD integrators, and state/local government projects where domestic sourcing is a contract requirement. RoHS compliance covers EU and California RoHS regulatory environments.
- UL & c-UL Listed (60950): Dual UL/c-UL listing covers both US and Canadian safety requirements — relevant for cross-border enterprise deployments or Canadian government contracts. The 60950 standard applies to IT equipment, appropriate for data center and communications cabinet environments.
- Operating Range 10–45°C: Rated for 50–113°F ambient — standard data center and IDF/MDF closet range. Not rated for extreme environments; if your equipment room runs hot, verify ambient temps stay inside that ceiling.
- 5-Year Limited Warranty: Five years from Vertiv on a passive PDU is a meaningful lifecycle commitment — aligns with typical enterprise refresh cycles and gives procurement teams a warranty horizon that matches NVR and switch warranties in the same rack.
Integration & Compatibility
The BRN060-1023 feeds any equipment with a NEMA 5-20P or 5-15P plug rated for 120V/20A circuits — covering the majority of 1U and 2U rack-mount network switches, NVRs, access control servers, and video management appliances in commercial security builds. The 5-20R receptacle is backward-compatible with 5-15P plugs, so you're not locked into sourcing matched plugs for every connected device. This is a passive, non-switched, non-metered PDU — there is no network interface, no remote outlet control, and no power monitoring. If per-outlet metering or remote switching is a project requirement, step up to a metered or switched variant in the Vertiv rPDU lineup. For mixed-voltage racks or international deployments, note this unit is rated 100–120V only — 208/240V loads require a different PDU family entirely. Pair this PDU with a rack enclosure that provides a dedicated 20A branch circuit feed; the 5-20P plug requires a 20A-rated receptacle at the source, not a standard 15A outlet.
Frequently Asked Questions
Q: Is the Vertiv 29607 TAA compliant for federal procurement?
A: Yes. The 29607 (BRN060-1023) is manufactured in the USA and is explicitly listed as TAA Compliant and Buy American Act COTS Compliant in Vertiv's product documentation.
Q: How many outlets does the 29607 have, and what receptacle type?
A: Six NEMA 5-20R receptacles, all rear-mounted in duplex configuration. The 5-20R accepts both 5-20P and 5-15P plugs, so standard 15A plugs will fit without adapters.
Q: What is the warranty on the 29607?
A: Vertiv provides a 5-year limited warranty on the BRN060-1023 / 29607.
Q: Does the 29607 include remote monitoring or outlet switching?
A: No. The 29607 is a basic, passive PDU with no network interface, no remote switching, and no metering. It has a single power-on LED indicator only. For monitored or switched capability, a different Vertiv rPDU model is required.
Q: What is the maximum continuous load I should run on the 29607?
A: The PDU is rated 20A, but NEC 80% continuous load guidelines mean you should target no more than 16A of sustained load across all six outlets combined. The built-in 20A thermal breaker will trip on sustained overloads beyond that threshold.
Q: What power cord is included, and what plug type does the 29607 use?
A: The 29607 ships with a 10-foot, 12/3 AWG cord terminated with a NEMA 5-20P plug. Your source receptacle must be a 20A-rated outlet — a standard 15A wall outlet will not accept the 5-20P plug.
The 29607 is the PDU I spec when a project needs reliable 20A distribution in a 1U footprint and nobody wants to pay for monitoring features they'll never use. The BRN060-1023's 12/3 AWG cord and 20A thermal breaker are correctly sized for the load — this isn't a cost-cut where the wire gauge doesn't match the rating.
Technical Highlights:
- 20A Thermal Breaker: Self-resetting over-current protection means no fuse replacement after a trip — on a security rack running 24/7, that matters when a quick recovery counts.
- TAA / Buy American Act Compliance: USA-manufactured with full TAA and Buy American Act COTS documentation — clears procurement hurdles on federal, DOD, and state government bids without a waiver request.
- 5-20R Backward Compatibility: The 5-20R receptacle accepts standard 5-15P plugs, so you won't be hunting for pigtail adapters when connecting equipment with 15A cords to this 20A PDU.
Deployment Considerations:
- The source circuit must be a dedicated 20A branch circuit with a NEMA 5-20R receptacle — a standard 15A outlet physically will not accept the 5-20P plug. Confirm this with your electrician before the rack goes live.
- This is a 100–120V-only unit rated to 1.9kW. Do not deploy it on 208V circuits or in mixed-voltage racks — it has no auto-ranging input and will not support higher-voltage loads.
The 29607 earns its place in government security operations centers and commercial IDF closets where TAA compliance is mandatory, budget is fixed, and the power distribution just needs to work without a management interface adding complexity.
