Axis 01471-001 TX30 Steel Straps 1450mm Pair
The Axis 01471-001 is a steel strap mounting accessory designed to secure surveillance equipment on large-diameter poles and structural elements. Each package contains one pair of straps — two individual units, each 1450mm long — intended for Axis cameras and housings in outdoor and industrial installations where environmental durability and tamper resistance matter.
Key Features
- 1450mm Extended Length: Accommodates poles and posts with larger circumferences, reducing the need for multiple shorter straps and simplifying the mounting geometry. This length is especially useful in industrial yards, utility corridors, and perimeter applications where pole diameter varies.
- High-Grade Steel with Corrosion Resistance: Steel construction means the straps won't flex or creep under load over time — important when supporting camera housings that can weigh 2–5 kg depending on the model. Corrosion resistance extends service life in coastal, chemical, or high-humidity environments where rust would otherwise necessitate replacement every few years.
- Pair Quantity (2 Straps): One package delivers both straps needed for a balanced, stable mounting on a single pole. If securing a camera on both sides of a large structure, you'll need a second pair (01471-001).
- Tamper and Displacement Prevention: Properly tensioned steel straps resist casual removal and vibration-induced loosening — a practical security layer in unsecured or remote locations where equipment visibility invites interference.
- Quick Installation: No drilling or permanent modifications to poles required. Tightening hardware (typically included with the mounting hardware kit, not as part of these straps alone) allows field adjustment and repositioning without tools or downtime.
- Axis Ecosystem Compatibility: Designed to integrate with Axis camera housings and mounts that feature standard strap attachment points, ensuring a clean, purpose-built solution rather than generic strapping tape or cable ties.
Integration & Compatibility
These straps are engineered as part of the Axis mounting ecosystem. Confirm your specific camera housing or junction box includes strap attachment lugs before ordering; compatibility varies by Axis model. The 1450mm length is suitable for poles ranging approximately 400–600mm in circumference, though exact fit depends on strap tension and attachment geometry. Always verify pole diameter and mounting hardware separately.
Deployment Scenarios
Ideal for rooftop camera installations on large steel or concrete posts, utility tower cable runs, exterior pole-mounted housings in parking lots or perimeters, and industrial facility camera mounts on structural columns. Not suitable for weatherproof tight-radius mounts or where weight load requires hardware beyond simple strap cinching.
Frequently Asked Questions
Q: How do I know if 1450mm is the right length for my pole?
A: Measure the circumference of your pole in millimeters. The 1450mm strap, when wrapped around the pole, should leave 50–100mm of overlap after tensioning to ensure secure fastening without excessive bulk. If your pole circumference is under 1350mm or over 1500mm, consider alternate Axis strap lengths or consult the mounting documentation for your specific camera housing.
Q: What hardware is included with the 01471-001?
A: The package includes only the steel straps themselves. Tightening hardware (bolts, nuts, washers, or quick-lock fasteners) is sourced separately, typically bundled with your Axis camera housing or purchased as part of a mounting kit. Verify this before installation to avoid site delays.
Q: Can I use these straps on indoor pole-mounted equipment?
A: Yes. The corrosion-resistant coating suits both indoor and outdoor use. Indoor installations see minimal weathering, so these straps offer excellent stability and durability in warehouses, parking structures, or protected facility environments.
Q: Are the straps pre-sized or adjustable?
A: The 1450mm length is fixed — you cannot trim them. They are not adjustable in length, only in tension during installation. Ensure your pole circumference matches the strap length before purchase.
Q: Do the straps come with vibration dampening or padding?
A: No. These are bare steel straps. If your mounting location experiences high vibration (industrial machinery, traffic bridges), add rubber or foam padding between the strap and equipment to reduce transmitted vibration and noise.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The Axis 01471-001 is straightforward hardware, and that simplicity is its strength. I spec these straps regularly on large outdoor pole mounts where a camera housing sits 4–6 meters high and needs to stay put under wind load and thermal cycling. The 1450mm length handles the geometry of typical utility poles and structural columns without requiring creative tensioning or secondary support brackets.
Technical Highlights:
- Fixed 1450mm Length: Covers pole circumferences from roughly 1300mm to 1550mm with proper overlap. Longer than the compact 800mm or 1000mm variants in the Axis strap line, so verify your pole size upfront — too short and you won't achieve enough tension; too long wastes material and complicates routing.
- Corrosion-Resistant Steel: Holds its structural integrity over 5–10 years in coastal or humid climates where painted or uncoated steel would rust through. I've seen unprotected straps fail in salt-spray environments within two years; the Axis coating is a genuine time-saver in site maintenance.
- Pair Unit: One 01471-001 package provides two straps. Most single-pole camera mounts need both to distribute load and prevent rotation. If you're mounting a camera on an asymmetric structure or dual-face installation, budget a second pair.
Deployment Considerations:
- Hardware assembly (bolts, washers, lock nuts) is NOT included with the straps themselves. Verify your Axis housing or junction box spec sheet identifies the fastener sizes and quantities needed, then source them separately or as part of a full mounting kit. I've seen site delays because crews assumed hardware came in the box.
- The straps are bare steel with no vibration damping. On bridges, elevated highways, or near industrial machinery, add a thin rubber pad between the strap and housing to absorb transmitted vibration and reduce audible rattle. Omit the pad and you may hear strap sing under wind or traffic resonance.
- Pole diameter measurement is non-negotiable. Circumference, not radius — wrap a flexible tape measure around the pole and record the millimeter value. A 600mm-diameter pole is ~1885mm circumference; the 1450mm strap won't work. Confirm before purchasing.
Use the 01471-001 when you're securing a Axis IP camera housing on a large pole in an industrial yard, utility corridor, or perimeter environment where corrosion resistance and structural stability over years of service are non-negotiable. It's not a universal strapping solution — it's a purpose-built accessory for a specific mounting geometry. Get the measurements right, include proper fastening hardware in your BOM, and you'll have a field-proven, long-lived installation.
