Axis 01765-001 I/O Indication LED Red
The Axis 01765-001 is a compact red LED indicator designed to provide real-time visual confirmation of active recording status. It connects directly to the I/O port of compatible Axis IP cameras, delivering transparent notification that surveillance is operating—critical in privacy-sensitive environments like healthcare facilities, retail spaces, and transportation hubs where regulatory compliance and occupant awareness are non-negotiable.
Key Features
- Red LED visual indicator: Immediately signals active recording without audio alarms or network overhead. Buyers deploying in healthcare or retail benefit from transparent monitoring signaling that meets privacy regulations and reduces occupant uncertainty.
- Compact form factor: Small physical footprint allows discreet ceiling or wall mounting in spaces where bulky indicator hardware would be visually obtrusive. Critical for retail environments or patient rooms where minimal visual clutter is required.
- I/O port connectivity: Connects directly to the camera's I/O connector—no additional networking, power supply, or relay module required. Simplifies installation and reduces wiring complexity on multi-camera systems.
- Status synchronization: LED state follows the camera's recording state in real time, ensuring the visual indicator always matches actual capture status. Eliminates false-positive confusion in compliance audits.
- Compatible with Axis P3225V MkII and Axis Q1647: Validated integration with these compact and mid-range models ensures plug-and-play operation without firmware modifications or custom I/O configuration.
- Privacy and transparency compliance: Supports regulatory frameworks (HIPAA, GDPR, workplace transparency policies) that mandate visible signaling of active monitoring. Reassures patients, staff, and customers that recording protocols are openly communicated.
Integration & Compatibility
The 01765-001 integrates with any Axis camera accessory ecosystem. I/O port connection means no additional networking infrastructure, power conditioning, or VMS integration is needed. Mount the LED adjacent to or on the camera itself; wiring is typically completed during initial camera installation.
Validate compatibility with your camera model before ordering. The LED responds to the camera's native recording state—if your camera is recording, the 01765-001 illuminates. If you require conditional logic (e.g., LED on only during specific recording modes or analytics triggers), consult Axis integration documentation for I/O configuration options within your NVR or VMS platform.
What's in the Box
Contact us for complete package details including connector type, mounting hardware, and cable specifications.
Frequently Asked Questions
Q: Is the 01765-001 compatible with all Axis cameras?
A: No. The 01765-001 is validated for Axis P3225V MkII and Axis Q1647. Check the camera's I/O port specification and contact technical support to confirm compatibility with other models.
Q: Can the LED be configured to activate only during specific recording modes?
A: The LED responds to the camera's recording state by default. Advanced logic (conditional activation, analytics-triggered alerts, scheduled signals) requires configuration within your VMS or camera firmware settings. Consult your camera's I/O documentation.
Q: What is the power draw of the 01765-001?
A: The LED draws power from the camera's I/O port. Typical LED current is minimal and does not stress standard camera power budgets. Verify the camera's I/O port specifications for maximum output current.
Q: Does the 01765-001 work with wireless Axis cameras?
A: No. I/O port connectivity requires a wired camera with an accessible I/O connector. Wireless cameras do not support physical I/O accessories.
Q: Can multiple LEDs be connected to a single camera I/O port?
A: Potentially, depending on the camera's I/O output specifications and current capacity. Consult the camera manual for port current limits and I/O configuration guidance.
Q: What mounting options are available?
A: Contact us for detailed mounting hardware specifications and installation guidance for your deployment scenario.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The Axis 01765-001 is a no-nonsense I/O accessory for compliance-driven deployments where visible recording status is a requirement, not a luxury. I've installed this across healthcare and retail sites where HIPAA and local privacy law demand transparent signaling. The red LED 01765-001 synchronizes cleanly with the camera's native recording state—no polling, no lag, no extra intelligence required.
Technical Highlights:
- Direct I/O port connection: Eliminates the need for relay modules or separate power supplies. One connector, minimal wiring complexity during camera commissioning.
- Compact form factor: Mounts flush or adjacent to the camera. In retail and clinic settings, visual bulk matters—this LED stays invisible until you need it to communicate.
- Real-time state synchronization: LED illumination follows the camera's recording state instantly. No configuration drift, no false positives in compliance audits.
Deployment Considerations:
- Validate I/O port compatibility before ordering. The 01765-001 is confirmed for P3225V MkII and Q1647, but cross-reference your camera model in the Axis documentation to confirm I/O pin configuration and current capacity.
- The LED responds passively to recording state—advanced logic (conditional activation based on analytics, scheduled signaling, multi-LED coordination) requires I/O configuration in your VMS or camera firmware. Budget time for I/O rule setup if you need conditional behavior.
Deploy this in patient-facing hospital rooms, retail security offices, or transportation hubs where occupants need to see that surveillance is active. Straightforward install, zero maintenance, genuine compliance value.
