Axis 02574-001 TM3813 Dome Clear 4-Pack Replacement
The Axis 02574-001 is a four-pack of OEM replacement domes designed for the AXIS M4317-PLVE and AXIS M4318-PLVE dome camera series. Dome clarity degrades over time in high-traffic surveillance deployments—retail floors, transit hubs, office lobbies, hospitality venues, food service areas—due to contact, cleaning cycles, and environmental exposure. This four-pack addresses that wear pattern directly and supports proactive maintenance scheduling.
Key Features
- Hard anti-scratch coating: Protects the optical surface from abrasion during routine cleaning and maintenance. In environments where staff regularly clean camera domes—food service, healthcare, retail—this coating extends dome usable life significantly. You replace on a predictable schedule rather than reactively when scratches degrade image quality, avoiding forensic image loss and unplanned camera downtime.
- Clear optical design: Maintains unobstructed light transmission to the camera sensor. A cloudy or degraded dome reduces image contrast, detail, and edge sharpness; the 02574-001 restores original optical performance without requiring camera reinstallation or network reconfiguration.
- Compatibility with M4317-PLVE and M4318-PLVE: Direct fit for both Axis models in this family. Dome swap is a physical operation only—takes minutes, no firmware updates, no VMS involvement, no interruption to video stream or camera configuration.
- Four-pack quantity: Covers immediate replacement demand plus strategic stock for larger deployments. Managing 20+ M4317/M4318-PLVE cameras across multiple sites? One four-pack covers a full maintenance cycle or addresses simultaneous failures across a floor or facility without waiting for expedited shipment.
- OEM genuine component: Sourced directly from Axis, not third-party aftermarket optics. Optical specifications and coating durability match the original dome—critical when image quality is contractually mandated, such as facial recognition verification, license plate clarity, or retail transaction documentation.
- No configuration required: Physical swap only. Works with any network video recorder or VMS platform that supports these Axis models—Axis Camera Station, Milestone XProtect, Hanwha SmartVMS, and others. Replacement does not affect video bitrate, frame rate, or camera firmware state.
Integration & Compatibility
Install these domes on Axis IP dome cameras in the M4317-PLVE and M4318-PLVE family only. No additional hardware, cables, or software is required. The dome is a field-replaceable optical component. Works with any network infrastructure that supports these Axis models; no PoE, DNS, or firewall reconfiguration is needed.
Deployment Considerations
Stock these domes if you operate dome cameras in environments with frequent cleaning protocols or high-touch zones—common in healthcare, food service, and retail. The hard coating delays optical degradation but does not prevent it indefinitely. Replacement intervals depend on cleaning method and frequency. Manual soft-cloth wiping extends dome life; abrasive or high-pressure cleaning methods accelerate wear and may compromise the coating itself.
For large-scale deployments, establish a dome replacement schedule based on your cleaning practices. High-traffic retail or transit environments may require annual replacement; office environments typically support 18–24 month intervals. Stock replacements on-site to eliminate service delays. A single degraded dome can compromise forensic image quality, and expedited replacement shipments are significantly more expensive than pre-positioned inventory.
When to Choose a Different Product
If you require tinted, smoked, or specialty optical domes to obscure camera presence or reduce glare, the 02574-001 is not the correct choice. If your cameras are Axis models outside the M4317-PLVE and M4318-PLVE series, this pack will not fit. For cameras with integrated heated/cooled dome housings or proprietary optical coatings, consult the camera documentation or contact Axis technical support to confirm replacement part compatibility before ordering.
Frequently Asked Questions
Q: Is the 02574-001 compatible with both the M4317-PLVE and M4318-PLVE?
A: Yes. The Axis 02574-001 is designed for direct replacement on both AXIS M4317-PLVE and AXIS M4318-PLVE dome camera models.
Q: Does the hard anti-scratch coating prevent all dome damage?
A: No. The coating delays optical degradation and extends dome life under normal cleaning and maintenance. High-pressure washers, abrasive scrubbing, or caustic chemicals can still damage the coating. Use soft-cloth wiping with gentle, camera-safe cleaners to maximize dome lifespan.
Q: How many domes do I get in one 02574-001 pack?
A: Four replacement domes per pack.
Q: Will replacing the dome affect my video stream, frame rate, or VMS connection?
A: No. Dome replacement is a physical-only operation. Video stream, bitrate, frame rate, and VMS integration remain unchanged. No configuration or network reconfiguration is required.
Q: Can I use the 02574-001 on other Axis dome camera models?
A: No. The 02574-001 is designed specifically for M4317-PLVE and M4318-PLVE models. Other Axis dome models may use different dome designs and mounting mechanisms. Confirm compatibility with your camera model before ordering.
Q: What is the recommended replacement schedule for these domes?
A: Replacement intervals depend on your cleaning frequency and method. High-traffic environments with frequent cleaning may need replacement every 12 months; offices typically support 18–24 month intervals. Monitor optical clarity during routine maintenance and replace when scratches or cloudiness affect image quality.
Marty AllisonPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The Axis 02574-001 is a straightforward but essential maintenance component if you're running M4317-PLVE or M4318-PLVE cameras in any environment where cleaning is routine. The hard anti-scratch coating is the real differentiator here—it doesn't make the dome indestructible, but it does extend the interval between replacements by absorbing minor abrasion that would otherwise cause visible cloudiness or micro-scratches. In retail, transit, or food service environments, that translates to fewer unscheduled camera outages and more predictable maintenance windows.
Technical Highlights:
- Hard anti-scratch coating: Standard plastic domes degrade quickly under soft-cloth wiping; the coating on the 02574-001 absorbs abrasion and extends useful life by 30–40% in high-cleaning environments before optical haze becomes visible to the naked eye.
- Clear optical design: Zero tinting means full light transmission across the visible spectrum. Degraded or aftermarket domes often introduce subtle color casts or reduce contrast by 5–15%; the 02574-001 restores your original image quality and ensures forensic-grade detail on facial or document captures.
- Four-pack quantity: Enough to cover a full year of maintenance across 4–8 cameras in a high-traffic deployment, or to stock 1–2 cameras in a smaller distributed deployment so you're not waiting for next-day shipping when a dome fails.
Deployment Considerations:
- The hard coating requires soft-touch cleaning—microfiber cloths, gentle pressure, camera-safe cleaners only. High-pressure or steam cleaning will damage the coating, not the dome itself, so train your maintenance team on cleaning protocol.
- Replacement intervals are highly dependent on cleaning frequency. If your cameras are cleaned weekly, expect dome replacement every 12 months; if cleaned quarterly or less, 24 months is typical. Track your cleaning logs and establish a predictable replacement schedule so you're not caught with a degraded dome during an active forensic investigation.
The 02574-001 makes sense for any deployment where you've already committed to the M4317-PLVE or M4318-PLVE form factor and need to maintain image quality through scheduled maintenance. Stock a four-pack on-site if you manage more than 4 cameras of this model; the cost of proactive replacement is far lower than the cost of expedited shipping and the risk of forensic image loss from an unexpected failure.
