Axis 5505-541 ACI Conduit Adapter 1/2"-3/4" 2 Pack
Overview
The Axis 5505-541 is a two-pack conduit adapter designed to bridge standard 1/2"-3/4" conduits or M25 pipes to compatible Axis camera mounting hardware. This accessory solves a specific cable-management problem: protecting and organizing conduit runs in outdoor and indoor deployments where cable strain relief and weatherproofing matter. Use this when you're running multiple camera feeds through rigid conduit and need a clean, code-compliant connection to the camera mount.
Compatibility
The 5505-541 works with Axis P32-series domes and Axis Q16-series cameras when paired with the AXIS ACI conduit bracket B mounting system. Verify compatibility with your specific camera model before ordering — these adapters are designed for systems using 1/2" or 3/4" conduit interfaces. If your installation uses different conduit sizes or non-Axis bracket systems, this adapter will not fit.
Installation Notes
Mount the adapter to the camera bracket using the threaded conduit connection. Ensure the 1/2" or 3/4" conduit is cut square and de-burred before insertion to avoid cross-threading. Tighten hand-tight, then use a wrench to snug — do not over-torque plastic fittings. The adapter maintains IP68 weatherproofing when correctly seated; confirm the conduit seal is clean and debris-free. No special tools beyond a standard adjustable wrench are required.
What's in the Box
- 2x ACI Conduit Adapter (1/2"-3/4" size)
