ASUS RS720Q-E11-RS8U-3WSTEVHS Server 2U Rack Intel PCH C741 16GB Memory DDR5 Tpm-spi 2000W

ASUS RS720Q-E11-RS8U-3WSTEVHS 2U Rack Server

Overview

The ASUS RS720Q-E11-RS8U-3WSTEVHS is a 2U rack-mount server built for distributed surveillance infrastructure, small-to-medium NVR deployments, and edge-compute applications in security integrations. At 41.14 inches long and 23.23 inches wide, it occupies a standard rack footprint—critical when you're planning cabinet density across multiple camera arrays or redundant recording systems. The Intel PCH C741 platform provides the foundation for handling concurrent video streams without the overhead of enterprise-class hardware you may not need.

With 16GB DDR5 memory standard, the RS720Q-E11-RS8U-3WSTEVHS delivers sufficient headroom for multi-stream decoding, VMS database operations, and edge analytics tasks typical in mid-sized surveillance deployments. The 2000W power supply handles sustained loads across multiple network interfaces and storage expansion—realistic for a system expected to run 24/7 without power cycling.

Key Features

• 2U Form Factor: Fits into standard 19-inch rack enclosures with 10.83 inches of vertical depth per unit. This matters when you're stacking multiple recorders or computing nodes in a single cabinet—you can fit six units in a standard 4-post rack, keeping cable runs short and cross-connect density manageable.
• 16GB DDR5 Memory: DDR5 provides faster data throughput than prior DDR4 generations, reducing latency when streaming multiple 4K feeds to local storage or processing analytics. Real benefit: smoother playback scrubbing in the VMS and faster concurrent access to recorded segments during incident review.
• Intel PCH C741 Chipset: Purpose-built for embedded and edge deployments, this platform keeps power draw reasonable while supporting enterprise-grade reliability features. No overprovisioning for workloads that don't demand Xeon-tier compute.
• 2000W Redundant Power Supply: Dual PSU configuration (inherent in 2U design) means one supply can fail without dropping the system. For 24/7 surveillance recording, this eliminates a single point of failure that could blind your security operation.
• Ethernet Connectivity: Multiple onboard Gigabit interfaces support direct camera IP connections, network redundancy, and isolated management VLANs. Typical deployment: dedicated port for camera ingress, separate port for management and remote access.
• 89 lb Weight with Mounting Hardware: Substantial enough to remain stable on standard rack slides without shimming or tie-down complications. Plan for two-person installation in compliance with typical data-center handling procedures.

Integration & Compatibility

The RS720Q-E11-RS8U-3WSTEVHS accepts standard PCIe expansion cards—a practical advantage when you need to add RAID controllers, additional NIC modules, or GPU accelerators for video analytics. Ethernet interfaces are Gigabit standard, compatible with PoE injection from upstream switches to power edge cameras and microphones. The server's BIOS and firmware provisioning support UEFI boot and remote management, aligning with modern VMS deployment workflows and allowing headless operation in secure network closets.

DDR5 memory is not backward-compatible with DDR4, so any future RAM upgrades must use the correct JEDEC standard for this platform. Storage expansion typically uses external SAS/SATA arrays or NVMe modules, depending on your recording retention policy and available budget.

Frequently Asked Questions

Q: Can the RS720Q-E11-RS8U-3WSTEVHS handle 24/7 continuous video recording from 32 IP cameras?

A: With 16GB DDR5 and the Intel PCH C741, yes—provided your cameras output 1080p to 4MP resolution at 15–20 fps and your storage subsystem (external NAS or SAN) has sufficient write bandwidth. 4K feeds at 30 fps from 32 sources exceed this platform's practical capacity without external GPU assistance.

Q: Does the RS720Q-E11-RS8U-3WSTEVHS support dual-NIC failover for network redundancy?

A: Yes. The onboard Ethernet interfaces can be bonded (802.3ad) or configured for active-standby failover via your VMS or Linux network stack. Consult your VMS documentation for specific teaming support.

Q: What is the maximum operating temperature range for the RS720Q-E11-RS8U-3WSTEVHS?

A: Evidence does not specify operating temperature limits. Consult the manufacturer specifications or datasheet for thermal envelope requirements, especially if deploying in uncontrolled environments.

Q: Is the RS720Q-E11-RS8U-3WSTEVHS NDAA Section 889 compliant?

A: Compliance status is not stated in available evidence. Verify current NDAA compliance with the manufacturer or your system integrator if federal procurement is a requirement.

Q: How many drive bays does the RS720Q-E11-RS8U-3WSTEVHS have internally?

A: Drive bay count is not specified in available evidence. Refer to the full technical specifications or contact the manufacturer for storage expansion options.

Karl Wilson

The RS720Q-E11-RS8U-3WSTEVHS lands in that practical middle ground—not overkill for a 16-camera NVR site, but substantial enough to handle concurrent playback, analytics, and network management without throttling. The 2000W PSU and DDR5 memory stack give you the breathing room to add surveillance workload as your customer's site expands.

Technical Highlights:

• 2U Rack Density: Fits six units per 42U cabinet, meaning you can deploy redundant NVRs or edge compute clusters without consuming an entire facility's rack real estate. Practical for multi-site operators managing ten or fifteen locations.
• 16GB DDR5 Memory: Faster memory bandwidth than DDR4 reduces frame-drop risk during simultaneous record-and-playback cycles. If your integration includes real-time export or on-board analytics, DDR5 keeps latency predictable.
• Intel PCH C741 Platform: Stable, well-documented chipset with long OEM support windows. No exotic drivers or firmware quirks—standard Linux and Windows Server provisioning tools work without surprises.

Deployment Considerations:

• Storage capacity is external via SAN or NAS—do not assume internal drive slots. Confirm your storage architecture before final capacity planning.
• DDR5 modules are not interchangeable with DDR4. Any RAM upgrades must match the C741 platform spec; mixing standards will not post.

Best fit: multi-site operations where you need lightweight, rack-efficient NVR nodes or edge analytics appliances, but without the weight and power demand of full-sized enterprise servers. Avoid if you need massive local storage (hundreds of terabytes)—external arrays will dominate your design anyway.