Altronix ALTV615DC416UBM Wall Mount DC Power Supply

Overview

The Altronix ALTV615DC416UBM is a wall-mountable DC power supply designed for low-voltage surveillance and security system installations. It accepts 110V AC input and delivers a selectable 6V to 15V DC output at up to 4A — making it a practical fit for powering cameras, access control readers, and ancillary security devices where a dedicated, locally mounted power source is preferable to long cable runs back to a centralized rack supply.

Altronix has a long track record in the security power market, and the Altronix power supply line is a common choice among integrators who need reliable, purpose-built solutions rather than generic switching supplies. The ALTV615DC416UBM fits within that lineage as a wall-mount unit suited to distributed power architectures common in commercial and institutional installations.

Key Features

• 110V AC Input: Connects to a standard North American AC outlet or dedicated circuit — no step-down transformer or special wiring required, which simplifies rough-in and reduces parts count in most domestic commercial environments.
• 6V–15V DC Adjustable Output: The selectable voltage range gives installers flexibility to match the supply to different device requirements on the same job site, rather than stocking multiple fixed-voltage units. Useful when powering equipment with varying input voltage specs.
• 4A Output Current: At 15V, that translates to up to 60W available — enough headroom to drive multiple small devices or a single higher-draw component. At 6V, the same 4A ceiling means 24W max, so match the load carefully to the selected voltage.
• Wall Mount Form Factor: Designed for direct wall installation, which keeps the supply close to the load and reduces voltage drop over long DC cable runs — a real concern when powering devices at the lower end of the voltage range from a remote location.

Integration & Compatibility

As a general-purpose DC power supply, the ALTV615DC416UBM is compatible with any low-voltage security device that accepts input within the 6–15V DC range and draws 4A or less. This includes a wide range of access control readers, door strikes, motion detectors, and certain camera models. Always verify the target device's input voltage spec and current draw before selecting this supply — mismatch on either parameter can damage equipment or cause unreliable operation.

For larger installations requiring centralized power distribution with battery backup, consider reviewing the broader Altronix catalog for rack-mount or multi-output power distribution units that may better fit your architecture. For PoE-powered IP cameras, a PoE switch is typically the more appropriate power delivery method — this supply targets analog, low-voltage DC, or non-PoE devices.

Frequently Asked Questions

Q: What is the output voltage range of the ALTV615DC416UBM?

A: The ALTV615DC416UBM delivers an adjustable DC output ranging from 6V to 15V at up to 4A.

Q: What AC input does the ALTV615DC416UBM require?

A: It operates on 110V AC input, compatible with standard North American electrical infrastructure.

Q: How is the ALTV615DC416UBM mounted?

A: It is designed for wall mounting, allowing installation close to the devices it powers to minimize DC voltage drop over cable runs.

Q: What types of devices can the ALTV615DC416UBM power?

A: Any low-voltage security or surveillance device that accepts 6–15V DC input and draws 4A or less — such as access control readers, door strikes, or analog cameras. Always verify device input specs before connecting.

Q: Is the ALTV615DC416UBM suitable for IP cameras using PoE?

A: No. PoE-powered IP cameras receive power over Ethernet from a PoE switch or injector. This supply is intended for devices that accept direct low-voltage DC input.

Karl Wilson

The ALTV615DC416UBM sits in the part of Altronix's line I reach for when the job has a few scattered analog or low-voltage DC loads that need clean, locally mounted power — particularly in retrofit jobs where pulling new PoE infrastructure isn't in scope. The adjustable 6–15V DC output at 4A covers a practical range of access control and legacy camera hardware without requiring separate supplies for each voltage tier.

Technical Highlights:

• Adjustable 6–15V DC Output: One supply can serve multiple voltage requirements across a site — 12V for most analog cameras, lower voltages for certain reader or sensor loads — reducing spare parts inventory on smaller commercial jobs.
• 4A Output Ceiling: At 12V that's 48W available — enough for a cluster of low-draw devices, but not a substitute for a multi-output distribution panel on larger camera counts. Size the load carefully before commissioning.
• Wall Mount Form Factor: Local mounting near the load is the right call for DC distribution — every foot of cable between supply and device is a voltage drop opportunity, especially at 6V. Wall-mounting near the IDF or device cluster keeps that drop manageable.

Deployment Considerations:

• Calculate total load current before wiring multiple devices to this supply — the 4A ceiling is shared across all connected loads, and exceeding it risks supply shutdown or device damage.
• This is a DC-only supply intended for direct low-voltage device connections; it does not provide battery backup or UPS functionality. For installations requiring continuity through power outages, pair it with an appropriate backup solution from the Altronix line.

Best fit for small commercial retrofit installations — a retail storefront, a single-floor office, or a remote IDF closet — where a handful of analog or low-voltage DC security devices need reliable local power without the complexity of a full rack-mount distribution system.