Vertiv VC-RF-0024 Aisle Containment Roof Duct Panel
Overview
The Vertiv VC-RF-0024 is a 1200 mm × 1500 mm (approximately 4 ft × 5 ft) roof duct panel designed for hot-aisle or cold-aisle containment deployments in data centers and server rooms. Finished in black, it installs as part of a Vertiv aisle containment system to seal the overhead plane of a contained aisle — directing conditioned air where it needs to go and preventing hot exhaust from recirculating into equipment intakes. If you are building out a aisle containment row and need a roof fill panel at this dimension, the VC-RF-0024 covers the 4×5 ft overhead zone precisely.
Key Features
- 1200 mm × 1500 mm coverage footprint: At roughly 4 ft wide by 5 ft deep, this panel spans a standard mid-row overhead section without field cutting — saves installation time and ensures a clean, consistent seal across the containment roof line.
- Black finish: Matches standard Vertiv containment hardware and blends with dark-ceiling data center aesthetics; no painting or finishing required on install.
- Roof duct panel form factor: Purpose-built as an overhead containment element — not a side curtain or end cap. Confirm your containment framing accepts this panel size before ordering.
Compatibility
The VC-RF-0024 (often searched as VC RF 0024) is part of Vertiv's aisle containment accessory line. Verify compatibility with your specific Vertiv containment frame model before ordering — roof panel dimensions must match the framing bay spacing in your installed system. Consult your containment system documentation or data center cooling layout drawings to confirm the 1200 mm × 1500 mm bay opening.
Frequently Asked Questions
Q: What are the exact dimensions of the VC-RF-0024?
A: The VC-RF-0024 measures 1200 mm wide by 1500 mm deep (approximately 4 ft × 5 ft). This is the panel's coverage footprint for overhead aisle containment.
Q: What color is the VC-RF-0024?
A: The panel is black, consistent with standard Vertiv aisle containment hardware finishes.
Q: Is the VC-RF-0024 a roof panel or a side curtain?
A: It is a roof duct panel — designed for the overhead plane of an aisle containment system, not a side curtain or end cap. Ensure your containment frame includes an overhead roof section before ordering this panel.
Q: Will this panel work with any brand's containment framing?
A: The VC-RF-0024 is a Vertiv-branded component. While the 1200 × 1500 mm dimensions may physically fit some third-party frames, compatibility is only confirmed within Vertiv aisle containment systems. Verify against your specific frame model.
The VC-RF-0024 is a straightforward overhead fill component — a 1200 mm × 1500 mm black roof duct panel for Vertiv aisle containment frames. Where I see integrators run into problems is ordering roof panels before confirming their frame's bay module spacing: if your containment system uses a different bay pitch, this panel either overhangs or leaves a gap, both of which defeat the purpose of containment. Measure the open bay in your installed frame first, then order.
Technical Highlights:
- 1200 mm width: Aligns with standard row widths for 600 mm or 1200 mm modular containment frames — covers a full bay in a single panel, no field cuts needed if your bay matches.
- 1500 mm depth: Matches common 600 mm or 750 mm rack-depth containment systems paired side by side — the 1500 mm overhead span covers two standard rack rows sharing a cold aisle.
- Black finish: No secondary finishing step; installs directly into the frame and matches Vertiv's standard containment hardware palette.
Deployment Considerations:
- Confirm your Vertiv containment frame model accepts 1200 × 1500 mm roof panels — not all Vertiv frame generations share the same bay dimensions. Cross-reference the frame's installation guide before ordering multiples.
- Roof panels are typically the last component installed after side curtains and end caps are in place; sequence your material deliveries accordingly to avoid panels sitting unprotected on the data center floor.
Best fit for a greenfield data center build or a structured row expansion where Vertiv containment framing is already specified and the overhead roof plane needs to be closed at a 1200 × 1500 mm bay interval.
