Vertiv VC-RF-0023 Aisle Containment Roof Duct Panel
Overview
The Vertiv VC-RF-0023 is a black cable duct panel designed for hot or cold aisle containment systems in data center environments. Measuring 900 mm wide by 1500 mm deep (approximately 3 ft x 5 ft), this roof panel fills the overhead gap between cabinet rows and the containment structure, directing airflow through the intended path rather than allowing bypass mixing — which is the primary cause of hot spots in high-density rack deployments.
Aisle containment is not a luxury in modern data centers: uncontrolled airflow recirculation forces CRAC/CRAH units to work harder, raises PUE, and creates unpredictable thermal conditions at the rack level. The VC-RF-0023 addresses the overhead plane of the containment envelope, sealing the roof section of the aisle to complete the enclosure.
Key Features
- 900 mm x 1500 mm Panel Footprint: The 3 ft x 5 ft coverage area is sized for standard data center aisle widths, reducing the number of individual panels needed to span a containment row and simplifying installation planning.
- Black Finish: The black colour is consistent with Vertiv's aisle containment product line, providing visual uniformity within a mixed-vendor or Vertiv-native containment system.
- Cable Duct Designation: Classified as a cable duct panel, the VC-RF-0023 accommodates cable pass-through requirements at the aisle roof level — a practical need in any production data center where overhead cabling crosses the containment boundary.
Integration and Compatibility
The VC-RF-0023 is part of Vertiv's broader Vertiv aisle containment portfolio. For proper fit and structural integrity, it should be used with compatible Vertiv data center infrastructure framing and containment hardware. Confirm aisle width and row length against your site layout before ordering — containment panels are not field-trimmable without compromising the seal. Consult Vertiv's containment configuration documentation or pre-sales engineering support to verify the correct panel count and frame compatibility for your specific aisle dimensions.
For a complete containment build, pair this roof panel with appropriate power and cooling infrastructure and end-cap assemblies to close the full aisle envelope.
Frequently Asked Questions
Q: What are the dimensions of the VC-RF-0023?
A: The VC-RF-0023 measures 900 mm wide by 1500 mm deep (approximately 3 ft x 5 ft).
Q: What color is the VC-RF-0023?
A: The panel is finished in black, consistent with Vertiv's standard aisle containment product line.
Q: Is the VC-RF-0023 a solid panel or does it support cable pass-through?
A: It is classified as a cable duct panel, meaning it is designed to accommodate cable routing at the aisle containment roof level.
Q: Can this panel be trimmed or cut to fit a non-standard aisle width?
A: Field modification is not recommended, as cutting the panel will compromise the containment seal. Verify your aisle dimensions against Vertiv's panel sizing before ordering.
Q: Does the VC-RF-0023 work with non-Vertiv containment frames?
A: The VC-RF-0023 is a Vertiv product and is designed for use with compatible Vertiv containment framing. Cross-vendor compatibility is not confirmed in available evidence — verify with Vertiv engineering before mixing containment system components.
The VC-RF-0023 is a roof duct panel for Vertiv's aisle containment system — a 900 mm x 1500 mm black cable duct panel that fills the overhead section of a hot or cold aisle enclosure. If you're specifying a containment build, this panel is the overhead piece that closes off the aisle roof and forces airflow to travel through your CRAC return path rather than short-cycling back into the rack intakes.
Technical Highlights:
- 900 mm Width: Sized to span standard aisle widths — fewer panels means fewer seam gaps, which is where most containment leakage occurs in practice.
- 1500 mm Depth: The 1.5-meter depth covers a meaningful segment of aisle length per panel, reducing total panel count for a typical 10–12 ft deep containment row.
- Cable Duct Design: Roof panels in production environments almost always need to accommodate overhead cable runs. The duct designation means this panel is built for that reality, not a sealed flat sheet that forces awkward workarounds at cable entry points.
Deployment Considerations:
- Measure your aisle width carefully before ordering — containment panels are not adjustable in the field without compromising the seal integrity that makes containment worth doing in the first place.
- Available spec data for the VC-RF-0023 (often searched as VC RF 0023) is limited to physical dimensions and panel type; confirm load rating, attachment hardware requirements, and full BOM with Vertiv's containment configuration team before committing to a panel count for a large aisle build.
This panel fits best in a planned Vertiv aisle containment deployment where the framing system is already specified — it is not a standalone solution and should be ordered as part of a complete containment kit scoped to your specific row length and aisle width.
