Vertiv VC-RF-0022 Aisle Containment Roof Duct Panel
Overview
The Vertiv VC-RF-0022 is a 600mm × 1500mm (approximately 2 × 5 ft) black roof duct panel designed for hot-aisle or cold-aisle containment systems in raised-floor and overhead data center environments. If you are closing out an open bay in a containment roof structure and need a rigid, correctly-sized infill panel that matches Vertiv's containment hardware ecosystem, this is the component to specify. It ships as a cable duct panel — meaning it is configured to accommodate cable pass-through while maintaining the containment boundary, rather than acting as a solid blank-off plate.
At 600mm wide and 1500mm deep, the VC-RF-0022 spans a standard single-bay width in most Vertiv containment roof assemblies. The black finish is consistent with Vertiv's aisle containment color standard, which matters when mixing panels across a multi-bay row deployment.
Key Features
- 600mm Width: matches the standard bay increment in Vertiv aisle containment roof systems — no field cutting or shimming required for a properly planned containment layout.
- 1500mm Depth: covers a full 5-foot bay depth in a single panel, reducing the number of joints and potential air bypass points in the containment ceiling.
- Cable Duct Configuration: maintains the containment plane while allowing structured cabling to exit the aisle — useful when overhead cable trays route through the containment zone.
- Black Finish: aligns with Vertiv's containment hardware palette, producing a uniform appearance across mixed-panel roof installations.
Integration & Compatibility
The VC-RF-0022 (often searched as VC RF 0022) is intended for use within Vertiv's Vertiv aisle containment product line. Verify your containment roof frame model and bay dimensions against the 600mm × 1500mm panel footprint before ordering — containment systems from other vendors may use non-standard bay pitches that will not accept this panel without modification. If your row uses 1200mm-deep bays, you will need the corresponding depth variant rather than this panel. For planning a full data center cooling containment layout, cross-reference your containment accessories list against the frame assembly guide for your specific Vertiv roof system.
Frequently Asked Questions
Q: What are the exact dimensions of the VC-RF-0022?
A: The panel is 600mm wide and 1500mm deep (approximately 2 × 5 ft). No height dimension is available in current evidence — confirm with the frame assembly specifications for your containment system.
Q: Is the VC-RF-0022 a solid blank-off panel or does it allow cable pass-through?
A: It is classified as a cable duct panel, meaning it is designed to accommodate cable routing through the containment boundary rather than acting as a fully sealed blank plate.
Q: Will this panel fit non-Vertiv aisle containment frames?
A: The VC-RF-0022 is designed for Vertiv containment roof systems. Compatibility with third-party frames depends on whether those frames accept 600mm-wide panel inserts — verify bay dimensions before ordering.
Q: What color is the VC-RF-0022?
A: Black, consistent with Vertiv's standard aisle containment hardware finish.
The VC-RF-0022 is a straightforward component, but getting the bay dimensions right before you order saves a return shipment. At 600mm × 1500mm, this panel covers a standard single-bay increment in Vertiv's containment roof assembly — and because it is a cable duct type rather than a blank plate, it is the correct pick when overhead cabling needs to pass through the containment boundary without breaking the thermal seal.
Technical Highlights:
- 600mm Bay Width: matches the standard Vertiv containment frame pitch — plan your row count against this module dimension before finalizing the panel order quantity.
- 1500mm Panel Depth: a single VC-RF-0022 spans a full 5-foot bay depth, minimizing seam count and reducing potential air bypass paths in the containment ceiling.
- Cable Duct Design: maintains the containment plane while allowing structured cabling egress — the right configuration when cable trays route through the contained aisle overhead.
Deployment Considerations:
- Confirm your containment frame's bay depth is 1500mm before ordering — Vertiv offers other depth variants, and ordering the wrong size against an active containment project causes delays.
- No mounting hardware or frame connector is specified in available evidence — verify what fasteners your frame assembly requires separately from this panel order.
This panel is well-suited for data center rows where cable management and thermal containment must coexist — specifically in overhead containment layouts where cabling exits through the roof plane rather than through the sides of the contained aisle.
