ACTi PMAX-1201 Rackmount Sliding Rail Kit
Overview
The PMAX-1201 is a 26-inch sliding rail pair built to rack-mount ACTi's INR-410 and INR-420 series network video recorders in a standard 19-inch equipment rack. If you're deploying either recorder in a data closet or server rack rather than a shelf, this kit is what turns a rack-unmountable NVR chassis into a slide-out unit you can service without pulling the whole enclosure off its mounts. The sliding mechanism lets you pull the recorder forward for drive swaps or cable checks without fully de-racking it — a real time-saver on multi-bay racks where the NVR isn't at eye level.
Compatibility
Confirmed fit is the ACTi INR-410 and INR-420 recorder series only — this rail kit is not a universal rack accessory, so verify your recorder model matches one of these two before ordering. If you're speccing rack space for a broader deployment, check the full ACTi catalog for recorder-specific mounting compatibility before committing rack units. For sites mixing recorder brands or planning multi-unit rack layouts, a network video recorders buying guide is worth reviewing alongside your VMS architecture plan to make sure rack depth and rail clearance are accounted for up front.
Installation Notes
Packaged dimensions run 30.9 in long in the shipping box, consistent with the 26-inch extended rail length — confirm your rack's usable depth clears this before mounting so the recorder doesn't bind on cable slack when slid forward. The kit ships at 12.4 lb, so plan for a two-point mount rather than single-hand installation. This is a rack-mount accessory only; it does not include PoE injection, power, or networking hardware, so budget separately for PoE switches if you're powering cameras from the same rack bay as the recorder.
What's in the Box
- 1x 26-inch sliding rail assembly (pair)
- Installation hardware
