Wall Mounts & Brackets for IP Cameras | Commercial Security

Plan Your Deployment

Camera or device compatibility and mounting interface
Wall material and structural support considerations
Indoor vs outdoor environmental requirements
Cable concealment and weatherproofing planning
Future service access and upgrade flexibility

Showing Results for Wall Mounts & Brackets

Compare

Out of stock
i-PRO

SKU: PWM71W

i-PRO PWM71W Wall Mount Bracket

Wall mount bracket for i-PRO cameras, indoor/outdoor use
- Compatible with select i-PRO camera models for fixed surveillance
- Durable engineered construction rated IP67 and IK10 for harsh conditions
- Simple installation design for vertical surface mounting and alignment
Special Order · Ships in 2-3 weeks

$107.72 $84.99 Save $22.73

Add to Cart
The item has been added
Free shipping over $499

$107.72 $84.99 Save $22.73

Add to quote Compare
Compare

Out of stock
i-PRO

SKU: WV-Q122A

i-PRO WV-Q122A Fine Silver Wall Mount Bracket

Wall mount bracket for i-PRO cameras with fine silver corrosion-resistant finish
- Fine silver finish resists corrosion in indoor surveillance deployments
- Wall mount configuration positions i-PRO cameras with secure, stable positioning
- Engineered metal construction supports fixed indoor camera installations
Special Order · Ships in 2-3 weeks

$111.88 $110.99 Save $0.89

Add to Cart
The item has been added
Free shipping over $499

$111.88 $110.99 Save $0.89

Add to quote Compare
Compare

Out of stock
i-PRO

SKU: WV-Q158C

i-PRO WV-Q158C Clear Wall Mount Bracket

Clear acrylic wall bracket for i-PRO dome cameras
- Transparent design minimizes visual obstruction in indoor/outdoor setups
- Compatible with i-PRO dome systems supporting audio and day/night operation
- Wall-mounted configuration integrates into retail, office, and commercial spaces
Special Order · Ships in 2-3 weeks

$320.16 $220.99 Save $99.17

Add to Cart
The item has been added
Free shipping over $499

$320.16 $220.99 Save $99.17

Add to quote Compare
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QJB500-B

i-PRO WV-QJB500-B Wall Mount Bracket Black

Black wall bracket for i-PRO cameras, indoor and outdoor rated
- Flush wall mount design keeps cameras discreet on vertical surfaces
- Rated for both indoor and outdoor environments with vibration resistance
- Purpose-built for i-PRO camera models with proper load distribution
In stock · Ships same business day

$86.70 $85.99 Save $0.71

Add to Cart
The item has been added
Free shipping over $499

$86.70 $85.99 Save $0.71

Add to cart Add to quote Compare
Compare

Out of stock
i-PRO

SKU: WV-QJB500-G

i-PRO WV-QJB500-G Gray Wall Mount Bracket

Gray wall mount bracket for i-PRO cameras, indoor and outdoor
- Powder-coated steel construction resists corrosion in outdoor environments
- Wall-mount design saves space while securing i-PRO camera series
- HTTPS encryption support for secure network camera integration
Special Order · Ships in 2-3 weeks

$116.20 $115.99 Save $0.21

Add to Cart
The item has been added
Free shipping over $499

$116.20 $115.99 Save $0.21

Add to quote Compare
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QJB500-W

i-PRO WV-QJB500-W White Wall Mount Bracket

White wall mount bracket for i-PRO compact IP cameras, indoor use
- Direct drywall or concrete installation with standard fasteners, no rails
- Discrete white powder-coat finish blends into retail and office interiors
- Vibration isolation keeps optical alignment stable during and after mounting
In stock · Ships same business day

$86.70 $85.99 Save $0.71

Add to Cart
The item has been added
Free shipping over $499

$86.70 $85.99 Save $0.71

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QJB504-W

i-PRO WV-QJB504-W White Base Bracket Mount

Ceiling & wall mount for i-PRO IP cameras, white finish, indoor/outdoor
- Dual orientation (ceiling/wall) eliminates need for multiple bracket SKUs
- Durable construction rated IP66/IK10 for indoor and outdoor environments
- Precision engineering holds camera stable without vibration or drift
In stock · Ships same business day

$125.66 $124.99 Save $0.67

Add to Cart
The item has been added
Free shipping over $499

$125.66 $124.99 Save $0.67

Add to cart Add to quote Compare
Compare

Out of stock
i-PRO

SKU: WV-QRM101

i-PRO WV-QRM101 Rack Mount Bracket

19-inch rack mount bracket for i-PRO equipment in standard installations
- Mounts securely in standard 19-inch rack systems for organized deployments
- Black powder-coat finish maintains professional appearance in data centers
- Purpose-engineered for i-PRO camera and accessory compatibility
Special Order · Ships in 2-3 weeks

$89.06 $88.99 Save $0.07

Add to Cart
The item has been added
Free shipping over $499

$89.06 $88.99 Save $0.07

Add to quote Compare
Compare

Out of stock
i-PRO

SKU: WV-QRM201

i-PRO WV-QRM201 Black Wall Mount Bracket

Black wall mount bracket for i-PRO camera systems, indoor/outdoor
- Adjustable positioning support for flexible camera angle installation
- IP67-rated, IK10 impact-resistant construction for outdoor durability
- Compatible across i-PRO camera portfolio for unified deployments
Special Order · Ships in 2-3 weeks

$49.46 $48.99 Save $0.47

Add to Cart
The item has been added
Free shipping over $499

$49.46 $48.99 Save $0.47

Add to quote Compare
Compare

Out of stock
i-PRO

SKU: WV-QSR501-B

i-PRO WV-QSR501-B 4-Screw Black Wall Mount Bracket

4-screw wall bracket for i-PRO dome cameras, black finish
- 4-screw configuration distributes load evenly for stable mounting
- Black powder-coat finish blends seamlessly in indoor surveillance
- Compatible with i-PRO dome camera models for direct installation
Special Order · Ships in 2-3 weeks

$179.80 $124.99 Save $54.81

Add to Cart
The item has been added
Free shipping over $499

$179.80 $124.99 Save $54.81

Add to quote Compare
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QSR501-W

i-PRO WV-QSR501-W Wall Mount Bracket for Dome Cameras

White wall mount bracket for dome cameras with 4-screw secure fit
- 4-screw attachment distributes load and resists vibration in fixed indoor setups
- White finish blends into standard ceiling and wall infrastructure
- Wall-mount design allows flexible positioning without overhead drilling
In stock · Ships same business day

$161.46 $111.99 Save $49.47

Add to Cart
The item has been added
Free shipping over $499

$161.46 $111.99 Save $49.47

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QSR501F-W

i-PRO WV-QSR501F-W ISO Female White Wall Mount Bracket

White wall-mount bracket with ISO female thread for i-PRO dome cameras
- 1.5" Rp thread specification ensures secure, vibration-resistant mechanical mounting
- Low-profile white finish integrates seamlessly into ceiling and wall installations
- Fixed positioning design simplifies retrofit deployments without overhead anchoring
In stock · Ships same business day

$158.30 $109.99 Save $48.31

Add to Cart
The item has been added
Free shipping over $499

$158.30 $109.99 Save $48.31

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QSR501F1-W

i-PRO WV-QSR501F1-W White Wall Mount Bracket for Dome Cameras

Wall mount bracket for i-PRO dome cameras with 1.5" NPS connection
- 1.5" NPS female ANSI thread fits i-PRO dome cameras without re-drilling
- White powder-coat finish blends into light interior surfaces
- Compact wall-mounted form factor for corridors and entry points
In stock · Ships same business day

$118.10 $117.99 Save $0.11

Add to Cart
The item has been added
Free shipping over $499

$118.10 $117.99 Save $0.11

Add to cart Add to quote Compare
Compare

Out of stock
i-PRO

SKU: WV-QSR501M-W

i-PRO WV-QSR501M-W ISO Male White Wall Mount Bracket

ISO male wall bracket for dome cameras indoors and outdoors
- 1.5-inch radius design allows flexible viewing angle adjustment
- White powder-coat finish resists corrosion in mixed environments
- ISO male connector integrates with compatible i-PRO dome systems
Special Order · Ships in 2-3 weeks

$158.30 $109.99 Save $48.31

Add to Cart
The item has been added
Free shipping over $499

$158.30 $109.99 Save $48.31

Add to quote Compare
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QSR502A-W

i-PRO WV-QSR502A-W Wall Mount Bracket for Dome Cameras

Wall mount bracket for i-PRO dome cameras with 4-screw design
- Four-screw fastening spreads load across multiple anchor points
- White powder-coat finish blends into standard indoor environments
- Rigid mounting platform minimizes vibration and camera drift
In stock · Ships same business day

$79.16 $78.99 Save $0.17

Add to Cart
The item has been added
Free shipping over $499

$79.16 $78.99 Save $0.17

Add to cart Add to quote Compare
Compare

Out of stock
i-PRO

SKU: WV-QSR503F-W

i-PRO WV-QSR503F-W Wall Mount Bracket ISO 1.5 Rp

White wall mount bracket for i-PRO dome cameras with ISO 1.5" Rp connector
- ISO female connector with 1.5" Rp tapered pipe thread for standardized coupling
- Powder-coated steel construction rated for indoor and outdoor wall installations
- 11.02 lbs capacity supports secure mounting of compatible i-PRO dome network cameras
Special Order · Ships in 2-3 weeks

$98.96 $97.99 Save $0.97

Add to Cart
The item has been added
Free shipping over $499

$98.96 $97.99 Save $0.97

Add to quote Compare

What to Look For When Buying

The decisions that matter most before you spec.

Load Rating & Payload Compatibility

Wall brackets must support camera weight, lens assembly, sunshield, and heater/blower (if PTZ). Verify max load rating against total mounted payload. Undersized brackets cause drift, image vibration, and foundation stress—review why surveillance systems fail during incidents for real-world mounting failure modes.

Adjustability & Field-of-View Control

Pan, tilt, and swivel ranges determine whether a camera can be aimed after installation without removing the bracket. Tilt range (typically ±45° to ±90°) and pan stops affect viewing angle flexibility in retrofit or dynamic deployments.

Material Selection & Environment Exposure

Aluminum brackets corrode in coastal or chemical environments; stainless steel (304 for mild corrosion, 316 for severe) lasts 5–10× longer. Powder-coated steel works indoors but fails in salt spray. Match bracket material to site climate to avoid rust-through in 18–36 months.

Cable Management & Conduit Integration

Brackets with internal cable channels or knockouts reduce water ingress, vandalism risk, and tangled runs. Conduit feedthrough ports must accommodate both power (PoE or 12V) and video (if coax). Poor cable routing causes network infrastructure stress and water pooling at the camera connection.

Installation Surface & Fastener Requirements

Concrete, brick, drywall, and metal studs each require different anchors (concrete wedge anchors, lag bolts, toggle bolts). Verify bracket footprint and hole spacing match your wall substrate. Undersized fasteners or hollow-wall installation without backing plates will fail within 12–24 months.

Brand-Specific Mount Compatibility

Leading brands like Axis, Hikvision, Hanwha, and i-PRO offer proprietary quick-connect or threaded mounts; verify your camera's mount pattern before selecting a generic bracket. Mismatched thread pitch or adapter plates add cost and complexity.

Technology Stack

The specs and acronyms that actually affect wall mounts & brackets performance.

Load Rating (lbs)

Maximum safe payload a bracket can support without deflection or creep. Typical ranges: compact 2–5 lbs, standard 10–25 lbs, heavy-duty 40–75+ lbs. Always include sunshield, lens, and heater/blower weight in your calculation.

Pan/Tilt/Swivel Ranges (degrees)

Adjustability limits—pan typically 350°+ (infinite or stops), tilt ±45° to ±90°, swivel ±180°. Greater range increases installation flexibility but may reduce rigidity; confirm range matches your FOV design.

Material & Corrosion Class

Aluminum (general purpose), painted/powder-coated steel (indoor/mild), 304 stainless (coastal/moderate salt), 316 stainless (severe salt spray). Corrosion class per ISO 12944 determines expected lifecycle in harsh environments.

Mount Pattern & Thread Standard

1/4"-20, 3/8"-16, M5, or proprietary connectors. Adapters can bridge mismatches but add height/cost. Verify your camera's mount pattern before purchase to avoid compatibility delays.

Cable Conduit & Knockouts

Internal or surface-mounted channels direct power and video safely; knockouts allow conduit integration. Prevents water pooling, vandalism, and UV degradation of exposed cabling.

Surface Prep & Fastener Type

Concrete/masonry requires wedge anchors or concrete screws; drywall needs toggle bolts or wall anchors; metal studs use self-drilling tek screws. Bracket footprint (spread of anchor points) distributes load—narrow mounts fail on weak substrates.

Typical Deployment Scenarios

Retail Store Perimeter (8 cameras, 20 ft. heights)

Eight Axis or Hikvision turret cameras mounted at building corners and entry/exit points. Use standard wall brackets (15–25 lb rating) with ±60° tilt for coverage of parking lot and entrance traffic. Powder-coated steel or aluminum; indoor/semi-sheltered walls. Estimate 8 brackets + 16 concrete anchors + 32 ft. conduit.

Manufacturing Plant (Dense High-Ceiling Install, 12 PTZ cameras, 25–35 ft.)

Heavy-duty wall brackets rated 40+ lbs supporting motorized PTZ domes with sunshields and heaters in harsh industrial environment. Stainless steel 304 or aluminum with galvanic isolators. Coordinated pan/tilt ranges to cover overlapping warehouse zones. Include surge protection and shielded video runs in metal conduit. Estimate 12 brackets + reinforced fastening + conduit labor.

School Campus Multi-Building (36 fixed cameras, mixed wall/soffit)

Standardized compact and low-profile brackets across 6 buildings—office entries, hallways, cafeteria, gym. Mix of 1080p and 2MP turrets. Weather-resistant aluminum or powder-coated steel. School deployments benefit from consistent mount types to simplify maintenance and spare parts. Estimate 36 brackets, uniform fastening schedule across buildings.

Coastal Government Facility (6 outdoor PTZ cameras, salt spray environment)

Six heavy-duty stainless steel 316 wall brackets supporting PTZ cameras on oceanside building facade. All fasteners 316 stainless; cable conduit sealed with silicone. Annual inspection and light corrosion treatment every 2 years. Estimate 6 premium brackets + high-spec fasteners + conduit sealing materials.

Frequently Asked Questions

What load rating do I need for my camera and bracket?

Add the camera body weight, lens, sunshield (if any), heater/blower, and any external microphone or sensor. Typical turrets 2–6 lbs; PTZ domes 8–25 lbs; thermal cameras 15–40 lbs. Select a bracket rated 1.5–2× the total payload to account for wind load, vibration, and safety margin. Always verify the camera and lens combo weight in the datasheet.

Can I use a generic bracket with my Axis, Hikvision, or Hanwha camera?

Most Axis, Hikvision, and Hanwha cameras use standard 1/4"-20 or M5 tripod mounts, so generic brackets work. However, some PTZ or specialty models use proprietary quick-connect fittings. Always verify the mount pattern in your camera datasheet before purchasing. Adapters are available but add cost and height.

What's the difference between aluminum and stainless steel wall brackets?

Aluminum is lightweight, corrosion-resistant in mild environments, and cost-effective for indoor/semi-sheltered use. Stainless steel (304 or 316) withstands salt spray, chemical exposure, and extreme moisture 5–10× longer than aluminum, but costs 30–50% more. For coastal or harsh industrial sites, stainless steel is mandatory; for offices and retail, aluminum or powder-coated steel suffices.

Do wall brackets come with fasteners, and what type do I need?

Most brackets ship with hardware (bolts, washers, nuts) for the bracket itself, but NOT anchor bolts for your wall. You must supply concrete anchors (wedge or screw type), lag bolts (for wood), or toggle/drywall anchors depending on your surface. Concrete substrates need at least ½" wedge anchors; drywall requires toggle bolts rated 25+ lbs each.

How do I route cables through a wall bracket to avoid water pooling?

Use brackets with internal cable channels or surface-mounted conduit. Route all cables downward with slight slope to a sealed conduit entry at the bottom. Seal the conduit entry with silicon, waterproof tape, or a bulkhead fitting. Never coil cables inside the bracket or leave cable ends unsupported—water will pool and corrode connectors.

What's the typical lifespan of a wall bracket in outdoor/coastal environments?

Powder-coated steel: 2–4 years before rust and degradation. Aluminum: 5–7 years (slow oxidation but acceptable). Stainless steel 304: 7–12 years in moderate salt spray. Stainless steel 316: 12–20+ years in severe coastal conditions. Inspect brackets annually for corrosion, loose fasteners, and cable integrity to extend service life.

Wall Mounts & Brackets

Plan Your Deployment

Showing Results for Wall Mounts & Brackets

i-PRO PWM71W Wall Mount Bracket

i-PRO WV-Q122A Fine Silver Wall Mount Bracket

i-PRO WV-Q158C Clear Wall Mount Bracket

i-PRO WV-QJB500-B Wall Mount Bracket Black

i-PRO WV-QJB500-G Gray Wall Mount Bracket

i-PRO WV-QJB500-W White Wall Mount Bracket

i-PRO WV-QJB504-W White Base Bracket Mount

i-PRO WV-QRM101 Rack Mount Bracket

i-PRO WV-QRM201 Black Wall Mount Bracket

i-PRO WV-QSR501-B 4-Screw Black Wall Mount Bracket

i-PRO WV-QSR501-W Wall Mount Bracket for Dome Cameras

i-PRO WV-QSR501F-W ISO Female White Wall Mount Bracket

i-PRO WV-QSR501F1-W White Wall Mount Bracket for Dome Cameras

i-PRO WV-QSR501M-W ISO Male White Wall Mount Bracket

i-PRO WV-QSR502A-W Wall Mount Bracket for Dome Cameras

i-PRO WV-QSR503F-W Wall Mount Bracket ISO 1.5 Rp

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Wall Mounts & Brackets

Frequently Asked Questions

Related Categories

Engineering Reading