Mounting Brackets & Kits
Sub categories
Showing Results for Mounting Brackets & Kits
-
Pelco
SKU: SWM5-W
Pelco SWM5-W Spectra Mini Wall Mount
- Supports wall, ceiling, pendant, and recessed orientations for flexible indoor placement.
- Accepts 0.75-inch NPT pipe or 20mm interface via included adapter plate for dual fit.
- Rated 32°F–122°F operating range ensures reliable performance across indoor environments.
$102.70 $101.99 Save $0.71The item has been added -
Pelco
SKU: TB1751
Pelco TB1751 Light Duty Mount with Bar Clip
- Bar clip fastening mounts to beams or conduit without drilling or adhesives.
- Supports wall and ceiling orientation from a single bracket — no extra hardware.
- ONVIF-compatible; integrates with Genetec, Milestone, Avigilon, and ExacqVision.
$63.44 $62.99 Save $0.45The item has been added -
Pelco
SKU: UEAC
Pelco UEAC 316L Stainless Corner Adapter
316L stainless corner adapter for ULISSE EVO cameras in corrosive environments
- Marine-grade 316L stainless steel resists chloride and crevice corrosion
- Angular offset corner mount designed for ULISSE EVO Series camera placement
- NDAA Section 889 compliant for regulated security deployments
$155.10 $154.99 Save $0.11The item has been added -
Pelco
SKU: UEAP
Pelco UEAP ULISSE EVO 316L Stainless Pole Adapter
Marine-grade 316L stainless pole adapter for ULISSE EVO PTZ cameras
- AISI 316L stainless steel resists chloride and salt-spray corrosion
- Adjustable clamp fits multiple pole diameters for flexible mounting
- NDAA Section 889 compliant for government and regulated installations
$119.95 $118.99 Save $0.96The item has been added -
Add to Cart The item has been addedPelco
SKU: UEAW
Pelco UEAW 316L Stainless Wall Counter-Plate
Marine-grade 316L stainless steel wall backing plate for ULISSE EVO
- AISI 316L stainless steel resists corrosion in coastal and marine environments
- Load-distribution backing prevents bracket pullthrough on weak wall assemblies
- Compatible with Pelco ULISSE EVO Series wall-mounted bracket systems
$169.48 $168.99 Save $0.49The item has been added -
Pelco
SKU: UEBP4AA
Pelco UEBP4AA ULISSE EVO Parapet Bracket Hi-PoE
Parapet bracket for ULISSE EVO PTZ cameras with integrated Hi-PoE
- Hi-PoE (4-pair) RJ45 connector powers ULISSE EVO PTZ without external supplies
- Built-in alarm inputs and relay outputs eliminate external wiring adapters
- RAL 9002 off-white finish for discrete mounting on parapets and flat surfaces
$215.00 $214.99 Save $0.01The item has been added -
Pelco
SKU: UEBP7AA
Pelco UEBP7AA ULISSE EVO Parapet Bracket Hi-PoE
Parapet bracket for ULISSE EVO PTZ with integrated high-power PoE
- High-power PoE connector with built-in alarm inputs and relay outputs
- Mounts on parapet walls and flat surfaces in RAL 9002 off-white finish
- Consolidates power and control in single unit; eliminates external adapters
In stock · Ships same business day$265.00 $189.99 Save $75.01 -
Pelco
SKU: UPTIRNBKT
Pelco UPTIRNBKT IR Illuminator Mounting Bracket
Adjustable bracket for UPTIRN IR illuminators, pole/wall/parapet mount
- Adjustable aim mechanism aligns IR beam with camera field of view
- IP66 rated for outdoor use on pole, wall bracket, or parapet surfaces
- NDAA Section 889 compliant for government and enterprise deployments
$277.47 $198.99 Save $78.48The item has been added -
Pelco
SKU: UPTJBUL
Pelco UPTJBUL ULISSE EVO UL Weatherproof Junction Box
UL-listed weatherproof junction box for ULISSE EVO PTZ cameras
- Sealed cable termination enclosure protects connections from moisture and debris
- Bracket-integrated mount with purpose-built threads for ULISSE EVO systems
- NDAA Section 889 compliant for government and regulated facility deployments
$276.14 $197.99 Save $78.15The item has been added -
Pelco
SKU: UPTWBA
Pelco UPTWBA Wall Bracket Internal Cable ULISSE EVO
Wall bracket for ULISSE EVO PTZ cameras with internal cable routing
- Internal cable channel protects wiring from weather and UV damage
- Surface wall-mount design for building facades and perimeter walls
- NDAA Section 889 compliant for government security deployments
$140.34 $139.99 Save $0.35The item has been added -
Pelco
SKU: UPTWBTAB
Pelco UPTWBTAB Parapet Bracket Internal Cable
Parapet bracket for ULISSE EVO PTZ cameras with internal cable routing
- Integrated internal cable channel hides wiring for clean professional installations
- Designed for flat-roof parapet walls to position camera above roofline
- NDAA Section 889 compliant for government and regulated deployments
$140.34 $139.99 Save $0.35The item has been added -
Pelco
SKU: USRACK
Pelco USRACK Card Cage Rack Mount US Power
19-inch rack chassis for Pelco fiber and data modules, US 120V
- Consolidates card-based fiber transmitters and data transceivers in single enclosure
- Integrated power distribution and cable management for equipment room deployments
- NDAA Section 889 compliant for government and regulated sector installations
$1,035.09 $739.99 Save $295.10The item has been added -
Pelco
SKU: VB-400-VF-MAG
Pelco VB-400-VF-MAG Magnetic Camera Mount
Magnetic close-fit mount for Pelco VB-400-VF fisheye camera
- Tool-free installation on ferrous metal surfaces, no drilling required
- Temporary, mobile, or semi-permanent deployment for rapid repositioning
- NDAA Section 889 compliant for government and regulated applications
$35.00 $34.99 Save $0.01The item has been added -
Pelco
SKU: VB-400-VF-MOL2
Pelco VB-400-VF-MOL2 Double MOLLE Mount
Double-row MOLLE mount for Pelco VB-400-VF fisheye cameras
- Dual-row MOLLE attachment secures to tactical vests, vehicle panels, and equipment rails
- Lightweight durable construction rated for field deployment and mobile surveillance
- NDAA Section 889 and TAA compliant for government procurement
$70.00 $69.99 Save $0.01The item has been added -
Add to Cart The item has been addedPelco
SKU: WBJA
Pelco WBJA Wall Bracket Ball Joint NDAA Compliant
Wall bracket with ball joint for Pelco housings, NDAA compliant
- Multi-axis ball joint positioning for precise field-of-view alignment
- Mounts to masonry, structural steel, and solid wood framing
- NDAA Section 889 compliant for government and regulated deployments
In stock · Ships same business day$26.01 $25.99 Save $0.02The item has been added -
Add to Cart The item has been addedPelco
SKU: WBLA
Pelco WBLA Ball Joint Wall Bracket for Camera Housings
Surface-mount wall bracket with ball joint for Pelco camera housings
- Integrated ball joint allows angular aiming adjustments post-installation
- Rigid metal construction supports secure mounting on solid surfaces
- Eliminates need to reposition anchors for camera fine-tuning
In stock · Ships same business day$795.06 $567.99 Save $227.07The item has been added
Mounting Brackets & Kits
Mounting brackets and kits provide secure and stable installation for IP cameras, intercom systems, access control devices, and related security equipment. Selecting the correct mounting solution ensures proper device alignment, weather protection, and long-term reliability.
Plan Your Deployment
- Wall, ceiling, pole, or corner mounting requirements
- Indoor vs outdoor environmental exposure
- Device model compatibility and load capacity
- Vandal resistance and tamper considerations
- Future service access and cable routing planning
Mounting Brackets & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 1048 working models of mounting brackets & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 4MP, Thermal, 8MP, 6MP, 20MP+, 5MP, 16MP |
| IP Rating | IP65, IP66, IP42, IP68, IP67, IP33, IP43, IP30 |
| Connectivity | Wired, Bluetooth, Wi-Fi, Cellular |
| Power | PoE, PoE+, AC/DC, Battery, PoE++, 24VAC, 12-24V AC/DC |
| Channels | 8, 16, 4 |
| Storage | microSD |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.