Accessory Kits
Showing Results for Accessory Kits
-
Geovision
SKU: 55-GS001-000
Geovision 55-GS001-000 GV-GIS Mobile Connection
- Native GV-GIS integration eliminates custom gateway config on existing deployments.
- iOS and Android support enables live view and event playback from any field location.
- Role-based access control syncs with GV-GIS accounts, avoiding duplicate credential setup.
$60.00 $59.99 Save $0.01The item has been added -
Geovision
SKU: 55-POSTS-002
Geovision 55-POSTS-002 GV-POS Text Inserter Dongle 2 Ports
- Dual POSINT ports enable simultaneous overlay from two independent POS terminals.
- Real-time text insertion embeds transaction data natively—no post-processing required.
- Timestamp sync aligns POS events to video frames, simplifying dispute and audit workflows.
$200.00 $199.99 Save $0.01The item has been added -
Geovision
SKU: 84-PCR1251-0010
Geovision 84-PCR1251-0010
- PTZ architecture eliminates multiple fixed cameras for single-area perimeter coverage.
- ONVIF-compatible IP connectivity integrates with Geovision NVRs and third-party VMS.
- PoE connectivity (30W) simplifies cabling with single-run power and data deployment.
$104.00 $103.99 Save $0.01The item has been added -
Geovision
SKU: 55-112AU-080
Geovision GV-1120A DSUB 8CAM 55-112AU-080
- Multiplexes 8 analog camera feeds over one 37-pin D-SUB, cutting BNC run count.
- Native fit for GV-1120A DVR — no adapters or signal converters needed.
- Shielded pairs resist crosstalk and RF interference in dense multi-camera runs.
$1,100.00 $522.99 Save $577.01The item has been added -
Geovision
SKU: 125-AVD2700-000
Geovision GV-AVD2700 (125-AVD2700-000)
- IP67/IK10 ratings support permanent outdoor and high-vandalism deployments.
- H.265 compression cuts bandwidth 40–60% versus H.264 on 24/7 recording.
- Six mount options and PoE 802.3af simplify retrofits with a single cable run.
$245.00 $244.99 Save $0.01The item has been added -
Geovision
SKU: GV-ERM-82
Geovision GV-ERM 251-erm-064
Expansion module for Geovision NVRs—add channels and storage capacity
- Centralizes up to 128 channels across GV cameras, DVRs, NVRs, and VMS on one console.
- Runs on 64-bit Windows 10, 11, Server 2016, and Server 2019 for flexible deployment.
- NAS integration lets you monitor storage capacity across all connected devices centrally.
$164.50 $110.99 Save $53.51The item has been added -
HES
SKU: 1600-106-BSP
HES 1600-106-BSP Black Suede Accessory Kit
Black suede accessory kit for HES 1600-series electric strikes
- Coordinates with HES 1600-series strike systems for uniform finish
- Black suede material maintains professional appearance in door frames
- Indoor door-mounted strike assembly integration for commercial access control
$102.00 $101.99 Save $0.01The item has been added -
Kantech
SKU: KT-ACC
Kantech KT-ACC KT-4 Accessory Kit
Essential passive components and connectors for Kantech access control
- KT-4 accessory kit with passive components for deployment
- Door control, reader interface, and power components
- 0.3 lb kit for rack and panel-mount installations
$71.00 $70.99 Save $0.01The item has been added -
Pelco
SKU: D6220L-US
Pelco D6220L-US Spectra Enhanced 1080p PTZ Drive
1080p PTZ drive unit for Spectra Enhanced housing refresh or upgrade
- 20x optical zoom with 1080p resolution for mid-range surveillance coverage
- Pan-tilt-zoom mechanism with low-light performance for indoor deployments
- NDAA Section 889 compliant; 120V North American power variant
$1,090.99The item has been added -
Pelco
SKU: P300-GAL-KIT
Pelco P300-GAL-KIT Galvanic Mount Kit
- Galvanic mount kit for Pelco P-series cameras
- IP67 weather-resistant pole mount enclosure
- Ground loop isolation for electrical protection
$84.02 $83.99 Save $0.03The item has been added -
Posiflex
SKU: MA200
Posiflex MA200 Accessory Pack For MT2100 Series *pl
- Factory-matched charger and cables eliminate power negotiation issues with MT2100 units.
- Bundled mounting hardware supports vehicle, wall, and desktop installation scenarios.
- Manufacturer-matched components preserve warranty coverage across multi-unit deployments.
$70.00 $69.99 Save $0.01The item has been added -
Speco Technologies
SKU: ACKIT2VIDB
Speco Technologies ACKIT2VIDB Speco ACKIT2VIDB 4 Door Access Cont
4-door access control module with card/badge reader support
- Independent relay outputs per door with failsafe/failsecure lock control
- Time-based scheduling and per-door access rules for coordinated entry
- Audit trail logging with timestamp and user ID for each access event
$3,425.00 $3,305.99 Save $119.01The item has been added -
Speco Technologies
SKU: CVCJBD2
Speco Technologies CVCJBD2 Compatible with HTINT59K1/HT5940TM
Junction box for HTINT59K1/HT5940TM multi-camera signal routing
- Consolidates wiring across multiple camera installations indoors
- White enclosure built for permanent professional surveillance deployments
- Compatible with standard Speco camera cabling and connectors
$66.85 $65.99 Save $0.86The item has been added -
Speco Technologies
SKU: H24HRLN40TB
Speco Technologies H24HRLN40TB 24 Ch. Record - 8 TVI + 8 Hybrid
24-channel hybrid recorder with 40TB storage for mixed TVI and IP cameras
- 8 TVI + 8 hybrid TVI/IP + 8 IP channels in one unit for legacy and modern deployments
- 40TB onboard storage supports extended retention across all 24 channels
- NDAA compliant for government and critical infrastructure procurement eligibility
$6,003.05 $3,310.99 Save $2,692.06The item has been added -
Speco Technologies
SKU: UTPAUDIO
Speco Technologies UTPAUDIO Send Audio up to 1 Mile over CAT5E
Audio transmission up to 1 mile over standard CAT5E cable
- Transmits audio up to 1 mile over CAT5E, eliminating dedicated shielded cable runs.
- ONVIF Profile I compliant, integrating cleanly into existing IP security architectures.
- 3-year warranty covers long-term deployments in campus and multi-building installations.
$43.75 $42.99 Save $0.76The item has been added -
STI
SKU: KIT-06297F
STI KIT-06297F Lock/Strike Accessory Kit - F Spacer
F Spacer kit for HID lock/strike systems at 9VDC
- F-series spacer corrects gap alignment between strike plate and door frame at install.
- Designed for HID credential environments; operates at 9VDC for low-voltage door hardware.
- Includes wall fixings, anchors, and cable entry inserts for clean surface-mount deployment.
$42.99The item has been added
Accessory Kits
Accessory kits provide bundled hardware and installation components designed to streamline surveillance and access control deployments. Pre-configured kits help reduce sourcing time, improve installation consistency, and support repeatable commercial project standards.
Plan Your Deployment
- Device compatibility and project scope alignment
- Standardization across multi-site deployments
- Mounting and fastening requirements
- Environmental durability considerations
- Future service and replacement planning
Accessory Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 4 working models of accessory kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| IP Rating | IP66 |
| Type | Camera, Dome, Accessory |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.