Refine by

No filters applied

Power Supplies

Power supplies provide stable and regulated power for surveillance cameras, access control devices, and intercom systems. Selecting the proper voltage, amperage, and redundancy configuration ensures reliable operation and minimizes system downtime in commercial environments.

Plan Your Deployment

Voltage and amperage requirements for connected devices
Centralized vs distributed power architecture
Redundancy and failover considerations
Indoor vs outdoor installation requirements
Code compliance and surge protection planning

Get Recommendations Electrical & Power

Showing Results for Power Supplies

Compare

Add to Cart The item has been added
Valcom

SKU: VP-324D

Valcom VP-324D 24VDC 300mA Regulated Power Supply

24VDC regulated supply, 300mA output for Valcom paging systems
- 300mA @ 24VDC regulated and filtered for clean audio without dropout
- Receptacle mount design fits rack, wall, or cabinet installations
- Rated 20-year lifespan in standard paging service environments
In stock · Ships same business day

$37.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Valcom

SKU: VP-412A

Valcom VP-412A 12VDC Power Supply Receptacle Mount

12VDC receptacle-mount supply, 400mA unfiltered for Valcom systems
- 400mA unfiltered output integrates directly into cabinet receptacles
- 12VDC reduces voltage drop over extended cable runs vs. 24V alternatives
- AC 130–260V input operates worldwide; indoor climate-controlled use only
In stock · Ships same business day

$39.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Valcom

SKU: VP-624D

Valcom VP-624D 24VDC 600mA Regulated Power Supply

24VDC regulated power supply, 600mA max, wall or rack mount
- 24VDC regulated and filtered output eliminates ripple for clean audio
- 600mA capacity supports distributed paging systems and control devices
- Compact 0.36 lb form factor fits wall enclosures and equipment racks
In stock · Ships same business day

$63.99 $57.99 Save $6.00

Add to Cart
The item has been added
Compare

Out of stock
Valcom

SKU: VP-9202

Valcom VP-9202 Power Supply Shelf (RU)

19-inch rack shelf for dual 165W Valcom power supplies
- Holds two VP-6124 power supplies (165W each) in standard EIA racks
- Rigid shelf design supports dual units without flex or movement
- Weighs 5.4 lbs; maintains easy access to connectors and indicators
Special Order · Ships in 2-3 weeks

$72.99 $64.99 Save $8.00

Add to Cart
The item has been added
Compare

Out of stock
Veracity

SKU: VPSU-1500-CLAMP

Veracity VPSU-1500-CLAMP Power Supply Unit

1500W industrial power supply with DIN rail CLAMP mount for surveillance
- 1500W capacity handles distributed camera systems and network infrastructure
- Industrial-grade operating temperature for outdoor cabinets and remote sites
- CLAMP mount installs on DIN rail or panel surfaces in minutes
Special Order · Ships in 2-3 weeks

$8.99 $7.99 Save $1.00

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Amperage & Load Planning

Size your supply at 120–130% of peak load to avoid thermal shutdown and extend component life. A 24V system with five 5A devices (25A nominal) needs a 32A or 40A supply. Under-sizing is a leading cause of system failure during peak demand.

Redundancy for Life-Safety & Access Control

Single supplies fail without warning. Dual-supply designs or UPS-backed configurations ensure doors unlock and intercoms function during power anomalies. Redundancy is required by code in many jurisdictions for egress and emergency communication.

Voltage Selection & Device Compatibility

Most locks, readers, and access points run 12V or 24V; cameras vary widely. Verify every device's rated voltage before specifying. Mixing 12V and 24V systems in one cabinet requires isolated supplies or regulators to prevent cross-voltage damage.

PoE Power Budget Constraints

Standard PoE (802.3af) supplies 15.4W per port; PoE+ (802.3at) 30W; High Power (802.3bt) up to 95W. A 24-port switch can deliver only ~375W total, easily exhausted by dense camera and access-point deployments. Injectors and midspans extend capacity.

Environmental & Mounting Constraints

Outdoor cabinets and damp enclosures require sealed, conformal-coated supplies rated for temperature extremes (−20 to +70°C typical). DIN-rail mounting saves space; enclosed supplies offer better noise isolation and thermal dissipation in server rooms.

Vendor Selection & Lead Times

Brands like Honeywell, Speco Technologies, and HES dominate access-control power; Pelco and Digi International focus on surveillance and networking. Verify manufacturer support, warranty, and stock availability before design lock-in.

Technology Stack

The specs and acronyms that actually affect power supplies performance.

DC Voltage Regulation & Ripple

Quality supplies hold output within ±5% of rated voltage under load variations and input sags. Ripple (AC noise superimposed on DC output) should be <2% peak-to-peak; excessive ripple causes camera image noise and lock chatter. Look for ±5V, ±12V, ±24V stability specs in datasheets.

Current Rating & Amperage Classes

Expressed in Amps (A) at rated voltage—e.g., 24V/5A, 24V/10A, 24V/40A. Higher amperage doesn't mean faster devices; it determines how many devices can draw simultaneously. Always check individual device current draw in milliamps (mA) and sum peak totals, not averages.

Power Factor & Input Voltage Range

Industrial supplies accept 100–240V AC input (worldwide compatible) and deliver regulated DC output. Power factor >0.9 reduces heating and helps avoid utility surcharges. Check input range to ensure compatibility with generators and unclean site power.

Short-Circuit & Fuse Protection

Integral fusing (fast or slow blow) and electronic current limiting protect the supply and downstream wiring from overcurrent events. Some supplies auto-recover; others latch off and require manual reset. Verify protection mode and response time for your application.

UPS Integration & Holdup Time

Supplies with integral or stackable battery backup maintain output for 5–60 minutes during AC loss, bridging the time for graceful shutdown or backup power activation. Holdup time (hold-up capacitor reserves) is separate; typical range 10–50 ms.

PoE (Power over Ethernet) Standards

802.3af (Type 1) = 15.4W, 802.3at (Type 2/PoE+) = 30W, 802.3bt (Type 3/4, High Power) = 60–95W. Injectors and midspan splitters add PoE to non-PoE switches. Always verify endpoint compliance and total switch/injector budget vs. connected device demand.

Typical Deployment Scenarios

Small Office Access Control (Single Door)

One 12V/5A regulated supply feeds an electric strike lock, RFID reader, and request-to-exit button. Total load ~2A. A simple wall-mount supply with integral fuse handles this; add a surface-mount enclosure in humid areas. Budget: 1 supply, 1 backup fuse kit.

Mid-Size Surveillance Closet (16 IP Cameras + NVR)

A 24V/20A regulated DIN-rail supply powers four 5A PoE injectors (one per four cameras), plus the NVR's 24V auxiliary input. If cameras are all PoE-enabled and the switch is remote, injectors bridge the gap. Add a second supply for redundancy and a UPS battery module for 10-minute hold-up.

Multi-Building Campus with Distributed Access (8 Doors, 24 Cameras)

Each building requires a local 24V/10A supply (for locks, readers, intercoms) plus one or two PoE injectors per camera cluster. Cabinet-mounted DIN-rail supplies with integral breakers minimize field wiring. Specify weatherproof outdoor enclosures for exterior cabinets; trunk all power back to a central UPS for life-safety compliance.

High-Density Server & Intercom Integration

A redundant 24V/40A supply pair feeds six 24V devices (intercoms, door controllers, call stations) and distributes 12V to analog sensors via a buck regulator. Modular or multi-output supplies reduce cable clutter. Proper conduit routing and junction boxing maintain code compliance and thermal management.

Frequently Asked Questions

What size power supply do I need for my system?

Add up the current draw (in milliamps or amps) of every device connected to that supply—cameras, locks, readers, intercoms. Multiply by 1.25 (safety factor) and round up to the next standard supply size (e.g., 5A, 10A, 20A, 40A). Always verify supply and load voltage match exactly.

Can I use one power supply for mixed 12V and 24V devices?

No. Single outputs are isolated; mixing voltages risks damage. Use separate regulated supplies for each voltage, or a multi-output supply with isolated rails. If you must share a cabinet, use a buck converter (24V down to 12V) downstream of a 24V primary supply, but size the primary for total current demand.

What's the difference between a regular power supply and a UPS-backed supply?

A regular regulated supply converts AC to clean DC and stops when AC fails. A UPS-backed supply includes integral or stackable battery modules that maintain DC output for minutes after AC loss, allowing orderly shutdown or switchover to backup power. Essential for access control and emergency intercoms.

Do I need a PoE injector if my switch already has PoE?

Not necessarily, but injectors solve two common problems: (1) extending PoE to non-PoE switches, and (2) supplementing insufficient switch PoE budget. A 24-port PoE+ switch can only deliver ~375W total; dense deployments often need additional injectors per camera cluster. Plan your PoE budget carefully upfront.

What does ±5% voltage regulation mean?

The supply guarantees output stays within ±5% of rated voltage (e.g., 24V ±1.2V = 22.8–25.2V) across load and input variations. Tighter specs (±3%) cost more but reduce noise and improve camera image stability. Cameras typically tolerate ±10%; locks are pickier (±5% or better).

How do I mount a power supply in an outdoor cabinet?

Use a DIN-rail mounted supply inside an IP65-rated enclosure. Ensure the enclosure has ventilation or a thermostat fan to keep internal temperature below the supply's rating (typically 70°C max). Add a surge protector or SPD at the AC input, and run conduit from the cabinet to devices using conduit adapters and gang plates for strain relief.

Power Supplies

Plan Your Deployment

Showing Results for Power Supplies

Valcom VP-324D 24VDC 300mA Regulated Power Supply

Valcom VP-412A 12VDC Power Supply Receptacle Mount

Valcom VP-624D 24VDC 600mA Regulated Power Supply

Valcom VP-9202 Power Supply Shelf (RU)

Veracity VPSU-1500-CLAMP Power Supply Unit

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Power Supplies

Frequently Asked Questions

Related Categories

Engineering Reading