IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Digi International

SKU: 76002121

Digi International 76002121 TX54 Power Supply Extended Temp

TX54 dedicated power supply for extended-temperature industrial deployments
- Operates across extended ambient temperature range for outdoor and field use
- DIN rail or chassis mounting for TX54 gateway and router systems
- 1.0 lb compact form factor (4.6 x 5.7 x 2.5 in) for space-constrained enclosures
Special Order · Ships in 2-3 weeks

$71.99 $67.99 Save $4.00

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76002127

Digi International 76002127 Wall Power Supply US

Wall-mount power supply for Digi devices, US 110-120V AC input
- Compact wall-mounted form factor fits tight network closets and cabinet spaces
- Compatible with Digi networking and edge computing platforms
- Weighs 0.19 lbs with 2.8 x 1.34 x 1.81 in dimensions for flexible placement
Special Order · Ships in 2-3 weeks

$29.99 $28.99 Save $1.00

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76002131

Digi International 76002131 3G/4G/5G Multiband Cellular Antenna

Multiband 3G/4G/5G antenna for Digi cellular gateways and routers
- Supports 3G, 4G, and 5G bands for continuous network coverage upgrades
- Designed for industrial, telecom, and security infrastructure deployments
- Compact 8.7" form factor with standard cellular cabling compatibility
Special Order · Ships in 2-3 weeks

$14.99 $13.99 Save $1.00

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76002136

Digi International 76002136 TX40 5G Accessory Kit

Complete mount and cable kit for Digi TX40 5G router deployment
- Includes mounting hardware and cables for vehicle and remote site installation
- Connectivity components ready for industrial IoT and mobile network setups
- Compact 8.0 x 6.0 x 4.0 in kit fits tight spaces in field deployments
Special Order · Ships in 2-3 weeks

$568.99 $543.99 Save $25.00

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76002137

Digi International 76002137 TX40 Accessory Kit

Complete accessory kit for TX40 system installation and field deployment
- Compatible with Digi TX40 security and network infrastructure equipment
- Designed for security integrators, IT managers, and installation professionals
- Compact 9.0 x 3.0 x 8.0 in kit weighing 1.0 lbs for easy transport
Special Order · Ships in 2-3 weeks

$522.99 $499.99 Save $23.00

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76002138

Digi International 76002138 TX40 Itxpt KIT TX Router

TX40 ITXPT kit router for security and telecom infrastructure
- ITXPT transmission protocol support for IP-based field deployment
- Complete kit with TX Router unit and ITXPT components included
- Compact 9.0 x 3.0 x 8.0 in form factor for industrial installation
Special Order · Ships in 2-3 weeks

$172.99 $165.99 Save $7.00

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76002147

Digi International 76002147 IX 5G Accessory Kit

IP55 accessory kit for Digi IX 5G industrial routers and gateways
- Supports 5G cellular IoT field installations across 600–6000 MHz frequency range
- Operating temperature range −20 °C to 70 °C handles demanding outdoor deployments
- Compact design with integrated antenna for edge computing and remote site setups
Special Order · Ships in 2-3 weeks

$130.99 $125.99 Save $5.00

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76002161

Digi International 76002161 18 VDC 1.66A Wall Mount PSU

18 VDC 1.66A wall mount PSU for Digi networking devices
- 29.88W output supports Digi gateways and industrial routers
- Compact external adapter mounts directly to standard wall outlets
- Proprietary Digi connector ensures secure device integration
Special Order · Ships in 2-3 weeks

$30.99

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76002172

Digi International 76002172 Wi-Fi Antenna

Wi-Fi antenna for Digi security and remote monitoring systems
- Compatible with Digi International wireless devices supporting standard Wi-Fi bands
- Compact 6.3 x 2.4 x 1.6 in form factor integrates into existing deployments
- Designed for security integrators and IT installers deploying networked monitoring
Special Order · Ships in 2-3 weeks

$12.99 $11.99 Save $1.00

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: ACC-440091

Digi International ACC-440091 UTP Cat6 Ethernet Cable 0.5M

0.5M Cat6 UTP patch cable for short-run network connections
- Cat6 UTP supports Gigabit Ethernet (1000BASE-T) with RJ45 connectors
- 0.5-meter length ideal for device-to-device and patch panel links
- Compatible with switches, IP cameras, PoE injectors, and NVR systems
Special Order · Ships in 2-3 weeks

$11.99

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: ELF-TSM-CBL-16

Digi International ELF-TSM-CBL-16 RJ45 8-Pin Female Cable

RJ45 8-pin female cable for Digi ETHERLITE terminal servers
- RJ45 8-pin female connector for serial console and device management
- Compatible with Digi ETHERLITE terminal server systems
- Designed for data center terminal server connectivity deployments
Special Order · Ships in 2-3 weeks

$289.99

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: EZPS-AC

Digi International EZPS-AC Field Installable Power Supply

AC-powered field installable supply for industrial network infrastructure
- Field installable design—no external enclosure modification required
- Industrial-grade operating temperature for demanding deployment conditions
- Compatible with Digi networking and telecommunications equipment
Special Order · Ships in 2-3 weeks

$195.99 $187.99 Save $8.00

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: ITPS-PSEK

Digi International ITPS-PSEK Power Supply

Dedicated DC power supply for Digi Connect IT industrial platforms
- Purpose-built for telecom, security, and enterprise network infrastructure
- Integrates with Digi Connect IT appliances for mission-critical deployments
- Compact form factor at 3.23 x 11.3 x 12.83 inches for flexible installation
Special Order · Ships in 2-3 weeks

$414.99 $396.99 Save $18.00

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: ITPS-PSIK

Digi International ITPS-PSIK Power Supply Port

Power supply port module for Digi Connect IT rack systems
- Designed for indoor rack and cabinet deployment in security infrastructure
- Integrates with Digi Connect IT power supply ecosystem for modular configuration
- Compact form factor at 13.0 x 11.5 x 3.25 inches for standard installations
Special Order · Ships in 2-3 weeks

$414.99 $396.99 Save $18.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Digital Watchdog

SKU: DWC-DSCM

Digital Watchdog DWC-DSCM Ceiling Mount Bracket

Aluminum ceiling bracket for Digital Watchdog dual-sensor dome cameras
- Aluminum alloy construction resists sag under heavy multi-sensor payloads
- Weatherproof design with sealed joints prevents corrosion and moisture ingress
- Adjustable pan/tilt positioning locks in place after installation
In stock · Ships same business day

$130.99

Add to Cart
The item has been added
Compare

Out of stock
Digital Watchdog

SKU: DWC-DSWM

Digital Watchdog DWC-DSWM Wall Mount Bracket White

Wall mount bracket for Digital Watchdog dual-sensor dome cameras
- Corrosion-resistant aluminum alloy construction rated weatherproof indoors/outdoors
- Adjustable positioning for optimized camera angle and coverage flexibility
- White finish with streamlined mounting interface for quick installation
Special Order · Ships in 2-3 weeks

$115.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Digi International 76002121 TX54 Power Supply Extended Temp

Digi International 76002127 Wall Power Supply US

Digi International 76002131 3G/4G/5G Multiband Cellular Antenna

Digi International 76002136 TX40 5G Accessory Kit

Digi International 76002137 TX40 Accessory Kit

Digi International 76002138 TX40 Itxpt KIT TX Router

Digi International 76002147 IX 5G Accessory Kit

Digi International 76002161 18 VDC 1.66A Wall Mount PSU

Digi International 76002172 Wi-Fi Antenna

Digi International ACC-440091 UTP Cat6 Ethernet Cable 0.5M

Digi International ELF-TSM-CBL-16 RJ45 8-Pin Female Cable

Digi International EZPS-AC Field Installable Power Supply

Digi International ITPS-PSEK Power Supply

Digi International ITPS-PSIK Power Supply Port

Digital Watchdog DWC-DSCM Ceiling Mount Bracket

Digital Watchdog DWC-DSWM Wall Mount Bracket White

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading