IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Digi International

SKU: 76002087

Digi International 76002087 Antenna Power Supply Cables Kit

Complete antenna, power, and cable kit for Digi networking devices
- All-in-one bundle with antenna, power supply, and cables for field deployment
- Compatible with Digi International networking and connectivity platforms
- Compact 2.8 x 5.0 x 4.0 in package weighs 1.6 lbs for portable installation
Special Order · Ships in 2-3 weeks

$1,281.99 $1,225.99 Save $56.00

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76002091

Digi International 76002091 TX54 DIN Rail Clip Accessory

DIN rail clip for Digi TX54 series industrial deployments
- Mounts TX54 devices on standard DIN rail infrastructure
- Supports industrial control, security, and telecom applications
- Compact 10.6 x 7.9 x 2.2 in footprint for cabinet integration
Special Order · Ships in 2-3 weeks

$68.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Digi International

SKU: 76002093

Digi International 76002093 DIN Mounting Bracket Kit

DIN rail mounting bracket kit for Digi devices
- Complete kit includes bracket and hardware for DIN rail installation
- Compact 4.0 x 3.5 x 4.0 in form factor fits standard telecom cabinets
- Weighs 0.75 lbs for space-efficient deployment in server rooms
In stock · Ships same business day

$44.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Digi International

SKU: 76002095

Digi International 76002095 DIN Rail Clip with Screws

DIN rail clip assembly with screws for Digi networking gear
- Secures equipment to standard DIN rail infrastructure
- Includes mounting screws for immediate installation
- Fits Digi devices in telecom, security, and industrial setups
In stock · Ships same business day

$4.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Digi International

SKU: 76002103

Digi International 76002103 LTE Dipole SMA Antenna 1-3 dBi

LTE dipole antenna with 1-3 dBi gain and SMA connector for wireless modules
- 1-3 dBi gain with omnidirectional coverage for LTE field deployments
- Direct SMA male mounting on Digi wireless modules and gateways
- PC/ABS construction rated -40°C to 85°C for mobile IoT applications
In stock · Ships same business day

$10.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Digi International

SKU: 76002104

Digi International 76002104 18VDC 1A Wall Mount Power Supply

18VDC 1A wall-mount PSU for Digi networking equipment
- Level VI efficiency rated for regulated DC output in industrial deployments
- Compact 74 × 44 × 40 mm form factor mounts directly at outlet locations
- Operates across -20°C to 70°C with global certifications (CE, FCC, ETL, UL 1310)
In stock · Ships same business day

$46.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Digi International

SKU: 76002105

Digi International 76002105 WiFi Antenna for 6350-SR

Dual-band WiFi antenna for Digi 6350-SR industrial routers
- Covers 2.4–2.5 GHz and 5.1–5.8 GHz bands for flexible deployment
- SMA male RP connector with direct mounting to 6350-SR platform
- Operates –40 °C to 85 °C; compact 200 mm form factor for field use
In stock · Ships same business day

$9.99

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76002106

Digi International 76002106 Ethernet Cable Unshielded Twisted

Standard UTP ethernet cable for network infrastructure and patch panels
- Unshielded twisted pair construction for reliable data transmission in structured cabling
- Compatible with standard ethernet equipment, patch panels, and network installations
- Lightweight design at 0.15 lbs for easy deployment across IT infrastructure
Special Order · Ships in 2-3 weeks

$11.99

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76002107

Digi International 76002107 Power Supply 18VDC 1A

18VDC 1A compact supply with universal input for Digi devices
- 100-240VAC universal input for global deployment without voltage conversion
- RJ45 connector integrates directly into standard network infrastructure
- Rated 0°C to 40°C operating range suitable for indoor installations
Special Order · Ships in 2-3 weeks

$177.99 $169.99 Save $8.00

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76002108

Digi International 76002108 M12 T-Code Female Connector 5M

M12 T-Code female connector, 5m cable for industrial networking
- M12 T-Code female connector integrates with A-Code and T-Code devices
- 5-meter length spans mid-range field installations without splicing
- Rated for harsh industrial environments in access control and surveillance
Special Order · Ships in 2-3 weeks

$147.99 $140.99 Save $7.00

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76002109

Digi International 76002109 WR44RR TX64 Rail Ethernet Adaptor

DIN rail Ethernet adaptor bridging WR44 RR to TX64 5G platforms
- Compact 0.25" x 4.0" x 0.25" form factor mounts directly to standard DIN rail
- Connects Digi WR44 RR to TX64 5G Rail for industrial control and telecom systems
- Compatible with Digi networking platforms and industrial Ethernet architectures
Special Order · Ships in 2-3 weeks

$245.99 $235.99 Save $10.00

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76002112

Digi International 76002112 18V Power Supply Unit

18V regulated PSU for Digi networking and security appliances
- 18V DC output with regulated power for stable operation
- Compact 3.0 x 3.0 x 1.5 in form factor weighs only 0.5 lbs
- Compatible with Digi infrastructure platforms and IP security systems
Special Order · Ships in 2-3 weeks

$19.99

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76002113

Digi International 76002113 IX30 Accessory Kit

Essential accessory kit for Digi IX30 industrial cellular router deployment
- Includes core components needed for IX30 installation and field operations
- Designed for telecom, security, and critical infrastructure deployments
- Compact 10.5 x 8.0 x 2.2 in kit weighs 1.2 lbs for portable field use
Special Order · Ships in 2-3 weeks

$143.99 $137.99 Save $6.00

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76002114

Digi International 76002114 3G/4G/5G Multiband Cellular Module

3G/4G/5G multiband module for IoT and infrastructure deployments
- Covers 6 MHz–6000 MHz spectrum across 3G, 4G, and 5G standards
- Mounts directly via SMA connector into Digi embedded systems and gateways
- Operating range −40 °C to 85 °C rated for field and industrial use
Special Order · Ships in 2-3 weeks

$16.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Digi International

SKU: 76002117

Digi International 76002117 18VDC 1A Wall Mount Power Supply

18VDC 1A wall mount PSU with Level VI efficiency for networked devices
- 18VDC, 1A output with Level VI efficiency rating minimizes power loss
- Compact 74×44×40mm form factor mounts directly to wall or cabinet
- IP42 rated with global certifications (CE, FCC, ETL, UL 1310, RoHS2)
In stock · Ships same business day

$19.99

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76002118

Digi International 76002118 4G Dipole Magnetic Antenna

4G LTE dipole antenna with magnetic mount for rapid repositioning
- Magnetic base mounts instantly on metal surfaces without tools
- 4G LTE frequency support for cellular gateways and modems
- External connector with 7-inch dipole design for improved signal reach
Special Order · Ships in 2-3 weeks

$29.99 $28.99 Save $1.00

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Digi International 76002087 Antenna Power Supply Cables Kit

Digi International 76002091 TX54 DIN Rail Clip Accessory

Digi International 76002093 DIN Mounting Bracket Kit

Digi International 76002095 DIN Rail Clip with Screws

Digi International 76002103 LTE Dipole SMA Antenna 1-3 dBi

Digi International 76002104 18VDC 1A Wall Mount Power Supply

Digi International 76002105 WiFi Antenna for 6350-SR

Digi International 76002106 Ethernet Cable Unshielded Twisted

Digi International 76002107 Power Supply 18VDC 1A

Digi International 76002108 M12 T-Code Female Connector 5M

Digi International 76002109 WR44RR TX64 Rail Ethernet Adaptor

Digi International 76002112 18V Power Supply Unit

Digi International 76002113 IX30 Accessory Kit

Digi International 76002114 3G/4G/5G Multiband Cellular Module

Digi International 76002117 18VDC 1A Wall Mount Power Supply

Digi International 76002118 4G Dipole Magnetic Antenna

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading