IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
Cradlepoint

SKU: 170886-000

Cradlepoint Inc 170886-000 Pole Mounting Clamps (Qty 2)

Pole mounting clamps for outdoor industrial router deployment
- Two clamps accommodate standard pole diameters in outdoor environments
- Designed for Cradlepoint edge routers and cellular gateway devices
- Withstands industrial temperature ratings for remote site installations
In stock · Ships same business day

$13.99

Add to Cart
The item has been added
Compare

Out of stock
Cradlepoint

SKU: 170888-000

Cradlepoint Inc 170888-000 Ethernet Cable Gland (Qty 2)

Sealed Ethernet cable glands for outdoor Cradlepoint networking gear
- Two glands per pack with weatherproof sealing for IP-rated installations
- Strain relief and environmental protection at Ethernet connection points
- Compatible with Cradlepoint wireless routers and W1855 5G adapters
Special Order · Ships in 2-3 weeks

$26.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Cradlepoint

SKU: 170904-001

Cradlepoint Inc 170904-001 DIN Rail Mount Bracket

DIN rail bracket for Cradlepoint routers and network appliances
- Mounts to standard 35mm DIN rail for cabinet and panel installations
- Compatible with R9X0, S7X0, and S4X0 series Cradlepoint devices
- Includes bracket, clip, and all M3/M4 screws for immediate deployment
In stock · Ships same business day

$28.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Cradlepoint

SKU: 170919-000

Cradlepoint Inc 170919-000 2x10 GPIO Cable for Expansion Module

2x10 GPIO cable for Cradlepoint expansion modules in industrial field deployments
- Gigabit-class connectivity rated for industrial operating temperatures
- 2x10 GPIO connector integrates with Cradlepoint expansion module platforms
- Cable only; verify GPIO slot compatibility with your specific module
In stock · Ships same business day

$24.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Cradlepoint

SKU: 170920-000

Cradlepoint Inc 170920-000 Drop Ceiling Mounting Bracket

Drop ceiling bracket for industrial Cradlepoint network gear
- Ceiling-mount design for data centers and enterprise facilities
- Rated for industrial operating temperatures and Gigabit speeds
- Compatible with Cradlepoint IoT networking equipment
In stock · Ships same business day

$22.99

Add to Cart
The item has been added
Compare

Out of stock
Cradlepoint

SKU: 170924-000

Cradlepoint Inc 170924-000 12VDC Power Supply 2x2 Molex

12V DC power supply with dual Molex connectors for Cradlepoint routers
- 3.0A output through 2x2 4-pin Molex dual connectors for redundant power
- 100-240V AC universal input supports global installations, 50-60 Hz
- 1.5-meter cable with standard Molex connectors for flexible rack mounting
Special Order · Ships in 2-3 weeks

$24.99 $23.99 Save $1.00

Add to Cart
The item has been added
Compare

Out of stock
Cradlepoint

SKU: RPM80089/01500

Cradlepoint Inc RPM80089/01500 Signal Cable DIN8

DIN8 signal cable for Cradlepoint network appliances and routers
- DIN8 connector interface compatible with Cradlepoint enterprise equipment
- Signal cable assembly for secure connectivity in industrial deployments
- Supports reliable transmission in telecom and distributed network installations
Special Order · Ships in 2-3 weeks

$46.99

Add to Cart
The item has been added
Compare

Out of stock
Cradlepoint

SKU: RPM80092/02000

Cradlepoint Inc RPM80092/02000 Signal Cable Battery

Battery integration cable for Cradlepoint routers with power failover
- Connects Cradlepoint routing equipment to external battery or secondary power
- Enables automatic failover during primary power loss for mission-critical uptime
- Supports remote sites, branch offices, and security integrator deployments
Special Order · Ships in 2-3 weeks

$44.99

Add to Cart
The item has been added
Compare

Out of stock
Cradlepoint

SKU: SEF901377/5

Cradlepoint Inc SEF901377/5 RAIL GEN2 Medium Bracket

DIN rail bracket for Cradlepoint CC30 series industrial deployments
- Medium-sized metal bracket engineered for standard DIN rail mounting
- Supports CC30 equipment in branch and remote site installations
- Built for vibration resistance in industrial telecom environments
Special Order · Ships in 2-3 weeks

$32.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Cradlepoint

SKU: TAA-170585-001

Cradlepoint Inc TAA-170585-001 Gpio Cable 3M

3m GPIO cable with SMA connectors for Cradlepoint routers
- 3-meter length supports flexible installation in network infrastructure
- SMA connector type integrates with Cradlepoint networking equipment
- TAA compliant for U.S. federal government procurement requirements
In stock · Ships same business day

$13.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Cradlepoint

SKU: TAA-170656-002

Cradlepoint Inc TAA-170656-002 DIN Rail Mounting Bracket

DIN rail bracket for Cradlepoint network devices, TAA compliant
- Mounts to standard 35mm DIN rail for organized infrastructure deployment
- TAA compliant for U.S. federal government procurement requirements
- Compatible with Cradlepoint network equipment, no additional hardware needed
In stock · Ships same business day

$28.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Cradlepoint

SKU: TAA-170676-000

Cradlepoint Inc TAA-170676-000 Gpio Cable DB9 3M

DB9 GPIO cable, 3M length, TAA-compliant for federal procurement
- DB9 connector configuration for serial and GPIO connectivity integration
- 3-meter cable length supports industrial routing and edge computing platforms
- TAA compliant for federal government procurement and security applications
In stock · Ships same business day

$19.99

Add to Cart
The item has been added
Compare

Out of stock
Cradlepoint

SKU: TAA-170716-001

Cradlepoint Inc TAA-170716-001 12VDC Power Supply 1.5M

12VDC power supply for Cradlepoint R2100, IBR, E300, E100 routers
- 12VDC regulated output with 1.5-meter integrated cable for flexible deployment
- TAA-certified for federal procurement and government contract eligibility
- Supports ruggedized router platforms in mobile, edge, and branch locations
Special Order · Ships in 2-3 weeks

$24.99 $23.99 Save $1.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Cradlepoint

SKU: TAA-170718-000

Cradlepoint Inc TAA-170718-000 Magnetic Mount Kit

Magnetic mount kit for secure, flexible Cradlepoint device positioning
- TAA-compliant for federal procurement and government deployments
- Magnetic attachment enables rapid field installation without permanent mounting
- Compatible with Cradlepoint mobile and fixed-location equipment ecosystems
In stock · Ships same business day

$14.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Cradlepoint

SKU: TAA-170750-001

Cradlepoint Inc TAA-170750-001 Rack Mount Kit for IBR1700

Rack mount kit for IBR1700 router, TAA compliant for federal procurement
- Integrates Cradlepoint IBR1700 into standard 19-inch rack infrastructure
- TAA compliant for U.S. federal government procurement requirements
- Optimizes vertical space with secure mounting in network operations centers
In stock · Ships same business day

$38.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Cradlepoint

SKU: TAA-170767-000

Cradlepoint Inc TAA-170767-000 COR Extensibility Cable

Industrial COR extensibility cable with TAA compliance for secure deployments
- SATA-DB9 connector configuration for reliable signal transmission in field installations
- TAA compliant for federal procurement and secure infrastructure requirements
- Rated for industrial operating temperatures in telecom and security environments
In stock · Ships same business day

$96.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Cradlepoint Inc 170886-000 Pole Mounting Clamps (Qty 2)

Cradlepoint Inc 170888-000 Ethernet Cable Gland (Qty 2)

Cradlepoint Inc 170904-001 DIN Rail Mount Bracket

Cradlepoint Inc 170919-000 2x10 GPIO Cable for Expansion Module

Cradlepoint Inc 170920-000 Drop Ceiling Mounting Bracket

Cradlepoint Inc 170924-000 12VDC Power Supply 2x2 Molex

Cradlepoint Inc RPM80089/01500 Signal Cable DIN8

Cradlepoint Inc RPM80092/02000 Signal Cable Battery

Cradlepoint Inc SEF901377/5 RAIL GEN2 Medium Bracket

Cradlepoint Inc TAA-170585-001 Gpio Cable 3M

Cradlepoint Inc TAA-170656-002 DIN Rail Mounting Bracket

Cradlepoint Inc TAA-170676-000 Gpio Cable DB9 3M

Cradlepoint Inc TAA-170716-001 12VDC Power Supply 1.5M

Cradlepoint Inc TAA-170718-000 Magnetic Mount Kit

Cradlepoint Inc TAA-170750-001 Rack Mount Kit for IBR1700

Cradlepoint Inc TAA-170767-000 COR Extensibility Cable

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading