IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Axis

SKU: 02966-001

Axis TW1108 Screw-on Mount - 02966-001

Screw-on mount for Axis cameras, wood/metal/concrete, indoor-outdoor
- Corrosion-resistant steel construction rated for indoor and outdoor use
- Low-profile design fits wood, metal, and concrete mounting surfaces
- Quick screw-on installation for Axis fixed dome and bullet cameras
Special Order · Ships in 2-3 weeks

$115.45 $111.99 Save $3.46

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02030-001

Axis TW1901 Weather-Resistant Cable Holder - 02030-001

IP66 weather-resistant cable holder for outdoor Axis camera installations
- IP66-rated plastic resists dust and water spray in outdoor environments
- Tool-free installation integrates with standard Axis mounting systems
- High-grade plastic withstands UV and temperature cycling without corrosion
In stock · Ships same business day

$40.20 $38.99 Save $1.21

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02032-001

Axis TW1902 Lens Protector for TW1200 - 02032-001

UV-resistant lens guard for Axis TW1200 network cameras
- Polycarbonate shield blocks dust, dirt, and physical impact damage
- IK10 rated construction withstands harsh environmental conditions
- Quick installation with minimal downtime to your surveillance setup
Special Order · Ships in 2-3 weeks

$91.74 $88.99 Save $2.75

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02725-001

Axis TW1906 Battery Replacement Kit 5-Pack - 02725-001

Genuine TW1906 Li-SOCl2 batteries, 5-pack for Axis W101 cameras
- Lithium thionyl chloride chemistry maintains stable voltage across discharge cycle
- Five batteries enable rotation across multiple W101 deployments without coverage gaps
- OEM-matched connector design and polarity eliminate installation risk
In stock · Ships same business day

$427.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02958-001

Axis TW1908 Stud Mount 10-Pack - 02958-001

Klick Fast stud mounts for Axis body-worn cameras, 10-pack
- Secure stud design resists accidental detachment during field operations
- Klick Fast quick-connect system—tool-free swap in seconds
- 10-pack bulk supply covers typical squad attrition without reorder delays
In stock · Ships same business day

$53.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 03209-001

Axis TW1909 USB-C Charging Adaptor - 03209-001

USB-C charger for AXIS W110 body cameras with fast charging
- USB-C connector with fast charging to minimize downtime between shifts
- Compact, portable design optimized for field operations and mobile deployment
- Supports multi-unit charging for efficient battery management across camera fleets
Special Order · Ships in 2-3 weeks

$53.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02978-001

Axis TW4100 Front Windshield Mount - 02978-001

Front windshield mount for Axis F-series mobile surveillance
- Secure positioning on vehicle windshields with flexible angle/height adjustment
- Weather-resistant construction engineered for continuous mobile operation
- Compatible with Axis F-series thermal and visible-light sensors
Special Order · Ships in 2-3 weeks

$91.74 $88.99 Save $2.75

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02979-001

Axis TW4101 Rear Windshield Mount - 02979-001

Adhesive rear windshield mount for Axis F-series covert vehicle surveillance
- Industrial-grade adhesive backing mounts securely without mechanical fasteners
- Low-profile design keeps sensor discrete while maintaining rear sight lines
- Engineered for high-vibration mobile environments with stable long-term hold
Special Order · Ships in 2-3 weeks

$85.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01471-001

Axis TX30 Steel Straps 1450mm Pair - 01471-001

Steel straps for large-diameter poles up to 1550mm circumference
- 1450mm length per strap accommodates oversized poles in industrial yards
- High-grade corrosion-resistant steel resists rust in coastal and humid sites
- Pair of two straps delivers balanced mounting on single pole or structure
In stock · Ships same business day

$56.69 $54.99 Save $1.70

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5502-821

Axis Video Surveillance In Operation Sticker 50pc

50-pack surveillance deterrent stickers, 4"x4" weather-resistant vinyl
- 50 peel-and-stick stickers per pack for widespread coverage across facilities
- Weather-resistant vinyl withstands UV exposure and temperature fluctuations
- Universal compatibility works with any surveillance system, no brand lock-in
Special Order · Ships in 2-3 weeks

$69.06 $66.99 Save $2.07

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 03077-004

Axis W401 Body Worn Activation Kit - 03077-004

Automated recording trigger for body worn camera deployments
- Multi-input activation via lightbar, siren, panic button, fire alarm, or MQTT
- PoE Class 5 powered with Wi-Fi, Ethernet, and Bluetooth connectivity
- Synchronized event-driven capture across all connected body worn cameras
Special Order · Ships in 2-3 weeks

$429.00 $423.99 Save $5.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02645-004

Axis W702 1-Bay Docking Station - 02645-004

Single-bay dock for body camera charging and video offload
- Simultaneous 5V charging and 100 Mbit/s data transfer via pogo pins
- Compact 76×95×47mm design fits patrol vehicles and evidence intake stations
- Shielded RJ45 connection offloads high-bitrate footage in minutes
In stock · Ships same business day

$129.89 $125.99 Save $3.90

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02646-004

Axis W703 8-Bay Docking Station - 02646-004

Charge and sync 8 body cameras simultaneously with 100 Mbit/s throughput
- 8-bay capacity with 100 Mbit/s per camera for fast data offloading
- Low-power 12V DC operation (max 120W) for flexible desk or wall mount
- Shielded RJ45 connectors with pogo pins, compact 128 × 425 × 52 mm form
Special Order · Ships in 2-3 weeks

$642.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 03114-001

Axis Weathershield 2-Pack Accessory - 03114-001

White weathershield 2-pack for outdoor dome cameras with anti-reflective lens protection
- Anti-reflective material reduces glint and false alarm triggers in high-glare environments
- Compatible with AXIS M3125-LVE, M3126-LVE, and M3128-LVE compact fixed domes
- White finish aids passive thermal management during peak sun exposure outdoors
In stock · Ships same business day

$64.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 03200-001

Axis Weathershield 4-Pack Fixed-Dome Camera - 03200-001

Black weathershield 4-pack for outdoor fixed-dome cameras
- Fits AXIS P3268-SLVE, Q3538-SLVE, Q3839-SPVE models
- Four-unit pack rated for outdoor weather protection
- Black finish maintains optical clarity in harsh conditions
Special Order · Ships in 2-3 weeks

$254.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02823-001

Axis XFQ1656 2-pin Auxiliary Connector - 02823-001

2-pin auxiliary connector for AXIS XFQ1656 system maintenance
- 2-pin configuration with 5.08mm pitch for secure auxiliary device connections
- Direct replacement component for AXIS XFQ1656 platform repairs
- Genuine Axis Communications connector for reliable system integration
Special Order · Ships in 2-3 weeks

$20.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Axis TW1108 Screw-on Mount - 02966-001

Axis TW1901 Weather-Resistant Cable Holder - 02030-001

Axis TW1902 Lens Protector for TW1200 - 02032-001

Axis TW1906 Battery Replacement Kit 5-Pack - 02725-001

Axis TW1908 Stud Mount 10-Pack - 02958-001

Axis TW1909 USB-C Charging Adaptor - 03209-001

Axis TW4100 Front Windshield Mount - 02978-001

Axis TW4101 Rear Windshield Mount - 02979-001

Axis TX30 Steel Straps 1450mm Pair - 01471-001

Axis Video Surveillance In Operation Sticker 50pc

Axis W401 Body Worn Activation Kit - 03077-004

Axis W702 1-Bay Docking Station - 02645-004

Axis W703 8-Bay Docking Station - 02646-004

Axis Weathershield 2-Pack Accessory - 03114-001

Axis Weathershield 4-Pack Fixed-Dome Camera - 03200-001

Axis XFQ1656 2-pin Auxiliary Connector - 02823-001

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading