IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Axis

SKU: 02614-001

Axis Q2112-E Thermal VGA Box Camera - 02614-001

VGA thermal box camera with IP66/IP67 and IK10 impact rating
- 640×480 thermal resolution with low NETD sensor for long-range detection
- IP66/IP67 sealed housing rated IK10 for coastal and industrial environments
- ARTPEC-8 processing with PT-mount compatibility for guard tour automation
Special Order · Ships in 2-3 weeks

$10,999.00 $10,849.99 Save $149.01

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 03299-001

Axis Q35 Weathershield Spare Part 5-Pack - 03299-001

OEM weathershields for Q35 thermal cameras, 5-pack with anti-loss screws
- Protects thermal lens optics from moisture and debris in outdoor deployments
- Compatible with Q3546-LVE, Q3548-LVE, Q3556-LVE, Q3558-LVE models
- 5-pack format reduces reordering cycles for multi-camera thermal surveillance sites
Special Order · Ships in 2-3 weeks

$162.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 03298-001

Axis Q3546-LVE Smoked Dome Cover 5-Pack - 03298-001

Smoked dome covers 5-pack for Axis Q-series PTZ and fixed cameras
- Hard anti-scratch coating resists lens degradation in indoor/outdoor use
- Smoked finish balances discretion with light transmission for video clarity
- Compatible with Q3546-LVE, Q3548-LVE, Q3556-LVE, Q3558-LVE models
Special Order · Ships in 2-3 weeks

$244.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 03303-001

Axis Q3839-PVE 19-Inch Rack Mount Bracket - 03303-001

19-inch rack mount bracket for Axis Q-series PTZ cameras
- Fits AXIS Q3839-PVE and Q4809-PVE PTZ models in standard rack setups
- Hardware-based installation for secure camera positioning in control rooms
- White finish, 1.09 lb — replacement or supplementary mounting component
Special Order · Ships in 2-3 weeks

$75.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 03245-001

Axis Q3839-PVE Outdoor Pendant Mount Kit - 03245-001

Pendant mount kit for outdoor Q38/Q48 cameras with integrated weather hat
- Integrated protection hat shields camera from rain and environmental exposure
- Compatible with AXIS Q3839-PVE and Q4809-PVE network cameras
- Weather-resistant construction rated IP66 for exterior surveillance
Special Order · Ships in 2-3 weeks

$213.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 03246-001

Axis Q3839-PVE Spare Dome Assembly - 03246-001

OEM replacement dome for Q3839/Q4809 PTZ cameras with anti-scratch coating
- Clear optical dome with hard anti-scratch coating resists scratches in field use
- Compatible with AXIS Q3839-PVE, Q3839-SPVE, and Q4809-PVE PTZ/panoramic models
- Includes steel mounting screws and weatherproof gaskets for secure installation
Special Order · Ships in 2-3 weeks

$75.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 03304-001

Axis Q3839-PVE Spare Part Cover Top - 03304-001

OEM dome cover replacement for Q3839-PVE and Q4809-PVE cameras
- Engineered polymer construction seals against moisture, dust, and contaminants
- Genuine Axis spare part maintains original weatherproofing and camera specs
- Direct fit replacement restores structural integrity to worn or damaged domes
Special Order · Ships in 2-3 weeks

$64.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 03305-001

Axis Q3839-PVE Weathershield Cover Replacement - 03305-001

Weathershield cover for Q3839-PVE and Q4809-PVE outdoor cameras
- Optically transparent composite shield reduces condensation on lens
- Protects optics and sensor from dust, debris, and moisture exposure
- Genuine Axis replacement part, direct fit for compatible models
Special Order · Ships in 2-3 weeks

$42.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5505-161

Axis Q60 Recessed Mount Drop Ceiling - 5505-161

Recessed drop-ceiling mount for AXIS Q60 indoor cameras
- Recessed design hides mounting hardware for discreet office and retail installations
- Compatible with AXIS Q60 indoor cameras in white durable construction
- Professional aesthetics blend into modern drop-ceiling environments
Special Order · Ships in 2-3 weeks

$119.58 $115.99 Save $3.59

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5700-951

Axis Q60-E Sunshield Kit - 5700-951

Weather-resistant sunshield for Q60-E cameras; cuts glare & UV
- Composite construction shields from direct sun, glare & reflections
- Rain & snow resistant; IP66-rated for outdoor durability
- Includes all mounting hardware for quick installation on Q60-E series
Special Order · Ships in 2-3 weeks

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5504-791

Axis Q60-S Smoked Dome Replacement Accessory - 5504-791

Smoked dome replacement for Q604x-S and Q6055-S cameras
- Nylon blend construction resists chemical exposure and mechanical stress
- Smoked finish maintains discreet surveillance without sacrificing optical clarity
- Direct fit for AXIS Q604x-S and Q6055-S series cameras
Special Order · Ships in 2-3 weeks

$106.18 $102.99 Save $3.19

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02198-001

Axis Q60/Q61 24V Power Cable 7m - 02198-001

7m power cable for Axis Q60/Q61 cameras, rated -50°C to +50°C
- 7-meter length (23 ft) for flexible placement away from power sources
- 24 V DC connector compatible with Q60 and Q61 series cameras
- Operates reliably in extreme cold down to -50°C for harsh environments
Special Order · Ships in 2-3 weeks

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 03312-001

Axis Q6000-E Hard-Coated Dome Clear Replacement - 03312-001

Hard-coated replacement dome for Axis Q6000-E/Q6010-E/Q6020-E
- Clear optical dome resists scratches and impact without image degradation
- OEM precision engineering maintains camera specs and outdoor performance
- Hard coating protects against dust, debris, and environmental hazards
Special Order · Ships in 2-3 weeks

$64.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 03226-001

Axis Q6010-E Hard Coated Smoked Dome - 03226-001

Hard coated smoked dome for Q6010-E and Q6020-E fixed cameras
- Scratch and weather resistant hard coated polycarbonate construction
- Smoked coating reduces glare and reflections for clearer image capture
- Includes mounting ring for secure installation on compatible Axis domes
Special Order · Ships in 2-3 weeks

$107.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 01538-001

Axis Q6055-E Stainless Steel Wall Mount - 01538-001

Stainless steel wall mount for EXCAM XPT Q6055 with cable protection
- Stainless steel 1.4404 construction resists corrosion in coastal and high-moisture environments
- Integral protective hood shields cable glands from water ingress and UV degradation
- Designed for EXCAM XPT Q6055 camera series with wall-mount deployment flexibility
Special Order · Ships in 2-3 weeks

$1,296.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 03386-001

Axis Q6100-E Hard Coated Clear Dome - 03386-001

Hard coated clear dome replacement for AXIS Q6100-E and Q6300-E PTZ
- Hard coat technology resists scratches and impact damage in high-use environments
- Clear optical glass maintains image clarity with minimal light loss or distortion
- OEM genuine Axis spare part with direct compatibility to Q6100-E and Q6300-E systems
Special Order · Ships in 2-3 weeks

$101.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Axis Q2112-E Thermal VGA Box Camera - 02614-001

Axis Q35 Weathershield Spare Part 5-Pack - 03299-001

Axis Q3546-LVE Smoked Dome Cover 5-Pack - 03298-001

Axis Q3839-PVE 19-Inch Rack Mount Bracket - 03303-001

Axis Q3839-PVE Outdoor Pendant Mount Kit - 03245-001

Axis Q3839-PVE Spare Dome Assembly - 03246-001

Axis Q3839-PVE Spare Part Cover Top - 03304-001

Axis Q3839-PVE Weathershield Cover Replacement - 03305-001

Axis Q60 Recessed Mount Drop Ceiling - 5505-161

Axis Q60-E Sunshield Kit - 5700-951

Axis Q60-S Smoked Dome Replacement Accessory - 5504-791

Axis Q60/Q61 24V Power Cable 7m - 02198-001

Axis Q6000-E Hard-Coated Dome Clear Replacement - 03312-001

Axis Q6010-E Hard Coated Smoked Dome - 03226-001

Axis Q6055-E Stainless Steel Wall Mount - 01538-001

Axis Q6100-E Hard Coated Clear Dome - 03386-001

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading