ACTi · CTI-PCMOD-PC67-IG

ACTi PC Module - Intel I7 Eight Core With - CTI-PCMOD-PC67-IG

N OPS PC compute module designed for commercial deployments where reliability matters

• Intel Core i7 eight-core OPS module for ACTi interactive panels
• OPS slot install - no external power supply or chassis needed
• Ships with Windows-compatible OS pre-installed for fast deployment

ACTi · CTI-PCMOD-MU16

ACTi PC Module - Memory Upgrade TO 16GB DDR4 - CTI-PCMOD-MU16

When your ACTi NVR or workstation starts choking on higher camera counts or retention demands, RAM becomes the bottleneck

• 16GB DDR4 capacity removes RAM bottlenecks on high camera-count NVR deployments.
• Factory-validated compatibility eliminates timing and voltage mismatches in ACTi platforms.
• Field-installable expansion module upgrades memory without replacing the host system.

ACTi · CTI-PCMOD-S500

ACTi PC Module - Storage Upgrade TO 500GB SSD - CTI-PCMOD-S500

500GB solid-state storage upgrade module purpose-built for ACTi PC-based surveillance and edge appliances

• 500GB SSD capacity supports 24/7 local recording and analytics buffering.
• Purpose-built for ACTi PC module-based systems and edge recorder slots.
• SSD form factor eliminates spinning-disk failure risk in always-on deployments.

ACTi · CTI-SRVCS-RFP1

ACTi PD Allocated PER Panel - CTI-SRVCS-RFP1

• Centralizes power distribution for ACTi peripheral panels, eliminating multiple adapters.
• Simplifies wire management across multi-door and distributed access control deployments.
• Integrates directly into ACTi access control and intercom infrastructure as a hardware module.

ACTi · PIOC-0200

Acti PIOC-0200 USB to RS-232 Serial Converter Cable

USB-to-RS-232 serial converter for Acti thermal imaging systems

• USB 2.0 to DB-9 RS-232 interface connects legacy serial devices
• Compatible with Acti thermal imaging camera installations
• Enables serial communication for device control and configuration

ACTi · 800-00001_00041

ACTi Pipeline Kiosk 12I FOR Ipad - Black W/ba - 800-00001_00041

When you need to deploy interactive access control, visitor management, or building directory systems in commercial environments, tablet-based kiosks

• Black powder-coated steel enclosure resists tampering in high-traffic lobbies.
• Weighted base enables freestanding deployment without structural wall modification.
• Integrated cable management conceals power and network runs for clean installs.

ACTi · 800-00001_00091

ACTi Pipeline Kiosk 12I FOR Surface-black - 800-00001_00091

Integrators deploying interactive kiosks for access control, visitor management, or self-service applications need secure, tamper-resistant

• Surface-mount black enclosure secures Microsoft Surface 12-inch tablets against removal.
• Internal cable routing eliminates exposed wiring, reducing tamper risk in public areas.
• Ventilated design supports continuous operation in high-traffic access control deployments.

ACTi · 800-00001_00214

ACTi Pipeline Kiosk 12I FOR TAB A - Black - 800-00001_00214

Self-service tablet kiosk designed for self-checkout, wayfinding, queue management, and retail interaction points

• Locking enclosure secures the host tablet against removal during operating hours.
• Integrated cable management routes power and data through the chassis for a clean install.
• Compatible with floor, counter, or wall mount points to fit varied deployment layouts.

ACTi · 800-00001_00215

ACTi Pipeline Kiosk 24I FOR TAB A - Black - 800-00001_00215

Self-service tablet kiosk designed for self-checkout, wayfinding, queue management, and retail interaction points

• Locking enclosure secures the host tablet against removal during operating hours.
• Integrated cable management routes power and data through the chassis for clean installs.
• Compatible with floor, counter, or wall mount points to suit varied deployment layouts.

ACTi · 800-00001_00033

ACTi Pipeline Kiosk 42I FOR Ipad - White W/ba - 800-00001_00033

Self-service tablet kiosk designed for self-checkout, wayfinding, queue management, and retail interaction points

• Locking enclosure secures iPad against removal during unattended public-facing operation.
• Integrated cable management routes power and data internally for a clean, tamper-resistant install.
• White finish suits retail and lobby environments; supports floor, counter, or wall mounting.

ACTi · 800-00001_00093

ACTi Pipeline Kiosk 42I FOR Surface-black - 800-00001_00093

Pipeline Kiosk 42I enclosure designed specifically for Surface-black integration

• Kiosk enclosure purpose-built for Surface-black ACTi surveillance deployments.
• Pipeline 42I form factor ensures consistent mechanical interface across installations.
• Integrated cable management simplifies field installation in standardized kiosk mounts.

ACTi · 800-00001_00030

ACTi Pipeline Kiosk 8I FOR Ipad - White W/bas - 800-00001_00030

Tabletop mount designed to position an iPad as a fixed VMS display station for surveillance monitoring

• Tabletop base secures iPad as a fixed VMS display—no wall or ceiling mount needed.
• White finish integrates cleanly into reception desks, control rooms, and security stations.
• No power connection required for the mount itself, simplifying deployment on any counter.

ACTi · 800-00001_00237

ACTi Pipleine Kiosk 42I - 800-00001_00237

Pipeline Kiosk 42I interactive display designed for surveillance operations and command center environments

• ONVIF-compliant integration supports deployment alongside third-party VMS platforms.
• Ethernet connectivity enables direct command-center network integration at installation.
• 100–240V AC power input supports fixed control-room installations globally.

ACTi · PLEN-0101

Acti PLEN-0101 4.2mm Fixed Focal Length Lens

4.2mm fixed lens with f/1.8 aperture and day/night for Acti cameras

• Manual focus adjustment allows field tuning after installation
• PoE (802.3af) powered—no separate power lines required at mount
• 8MP resolution support with IR night vision across lighting conditions

ACTi · PLEN-0119

Acti PLEN-0119 2.8mm Fixed Lens

CS-mount 2.8mm fixed lens for 2MP Acti cameras with 850nm IR

• 2.8mm focal length with F2.0 fixed iris for consistent indoor framing
• 850nm infrared support for night vision operation on compatible bodies
• PoE (802.3af) powered; works with 1/3" CS-mount Acti camera platforms

ACTi · PLEN-0131

Acti PLEN-0131 Varifocal Lens 3.3-9mm

3.3-9mm varifocal lens for 2MP day/night surveillance

• 3.3–9mm varifocal range lets you tune field of view on-site without swapping lenses.
• CS mount thread pattern ensures direct compatibility with ACTi 2MP camera bodies.
• Manual focus mechanism removes servo motor failure points for low-maintenance installs.

ACTi · PLEN-4101

Acti PLEN-4101 1.9mm Fixed Focal Lens

1.9mm fixed lens for Acti 8MP cameras with wide-angle coverage

• 1.9mm focal length with F2.8 fixed iris for consistent performance
• Wide-angle field of view ideal for large indoor monitoring areas
• PoE power integration simplifies installation without separate power runs

ACTi · PMAX-0102

ACTi PMAX-0102 Straight Tube without Bracket

Straight tube assembly for rack-mount camera systems and surveillance enclosures

• Bracket-free rack-mount design reduces component count and simplifies installation.
• Compatible with ACM-7411, TCM-7411, and TCM-7811 camera enclosure profiles.
• Zinc-plated construction supports cable routing within indoor rack environments.

ACTi · PMAX-0103

ACTi PMAX-0103 Pendant Tube with Bracket

Pendant tube mounting assembly designed to suspend ACTi dome cameras from ceiling installations

• Supports pendant and rack mounting modes to adapt to existing ceiling infrastructure.
• Compatible with ACTi ACM-7xxx, TCM-7xxx, and KCM-7xxx dome camera families.
• Assembly weight of 1.9 lb; verify ceiling load rating before installation.

ACTi · PMAX-0104

Acti PMAX-0104 Indoor/Outdoor Extension Tube

Extension tube for Acti cameras with PoE power, indoor/outdoor rated

• PoE (802.3af) powered—no extra wiring needed for indoor or outdoor setup
• Recessed mounting support fits Acti multi-sensor and fixed camera systems
• Outdoor-rated housing handles both interior and exterior deployment environments

ACTi · PMAX-0110

Acti PMAX-0110 Indoor Mount Kit for KCM-8111

Ceiling/wall mount kit for KCM-8111 PTZ camera with PoE power

• Single PoE (802.3af) connection powers camera and eliminates extra wiring
• Designed for Acti KCM-8111 PTZ systems in indoor controlled environments
• Supports 2MP resolution with integrated structural support for secure mounting

ACTi · PMAX-0112

Acti PMAX-0112 Extension Tube

Extension tube for D/E-series camera positioning and reach

• PoE-powered—no auxiliary supply needed for networked deployment
• Compatible with Acti D5x, D9x, E5x, E9x, and E9xx/M cameras
• Rack-mount design for flexible indoor surveillance installations

ACTi · PMAX-0115

Acti PMAX-0115 Pendant Mount for Z950

Pendant ceiling mount for Acti Z950 with PoE power

• Ceiling-suspended pendant configuration for indoor deployments
• PoE (802.3af) powered—no separate power infrastructure needed
• 2MP resolution compatible with Z950 camera system

ACTi · PMAX-0127

Acti PMAX-0127 Mount Kit

19-inch rack mount for Acti 20MP surveillance cameras

• Fits Z83, Z84, A811, A818 camera models in standard equipment racks
• Organized cable routing design for centralized security deployments
• Compact 152mm × 74mm form factor, 1.8 lb white steel construction

ACTi · PMAX-0201

Acti PMAX-0201 Outdoor Housing with Heater and Fan

IP66 outdoor housing with integrated heater and fan for 20MP+ cameras

• Maintains optimal temperature in seasonal extremes with built-in heater and fan
• IP66 protection shields 20MP+ resolution systems in harsh outdoor environments
• PoE (802.3af) powered with ONVIF compatibility for Acti and third-party cameras

ACTi · PMAX-0202

Acti PMAX-0202 Outdoor Housing for ACM-5 and TCM-5

IP66 outdoor housing for ACM-5 and TCM-5 rack-mount cameras

• IP66 weatherproof and dust protection for outdoor surveillance
• Rack mount design for structured installation and cable management
• Compatible with ACTi ACM-5 and TCM-5 camera series

ACTi · PMAX-0204

Acti PMAX-0204 Heavy Duty Outdoor Housing with Heater

Heated outdoor housing for 2MP cameras in freezing conditions

• Integrated heater maintains operation in freezing temperatures year-round
• PoE 802.3af power eliminates separate power runs at camera location
• Wall and rack mount options fit mixed installation environments

ACTi · PMAX-0205

Acti PMAX-0205 Heavy Duty Outdoor Housing with Bracket

Heavy duty outdoor housing with PoE bracket for ACTi cameras

• PoE (802.3af) powered—no separate electrical runs required
• Weather-resistant construction rated for outdoor surveillance
• Bracket assembly mounts securely for new and retrofit installations

ACTi · PMAX-0206

Acti PMAX-0206 PoE Heavy Duty Outdoor Housing

Rack-mounted PoE outdoor housing with integrated heat management

• PoE (802.3af) powered—no separate power supply required for outdoor deployments
• Integrated heat management maintains thermal stability in demanding outdoor environments
• Heavy-duty enclosure protects surveillance equipment and network gear from weather exposure

ACTi · PMAX-0302

Acti PMAX-0302 Gooseneck Mount with Bracket

Gooseneck mount with bracket for flexible ACTi camera positioning

• PoE+ powered—no external supply needed with compatible infrastructure
• Flexible angle adjustment for precise camera sightline positioning
• Rated for indoor and outdoor deployment on standard mounting surfaces

ACTi · PMAX-0303

Acti PMAX-0303 Gooseneck Mount without Bracket

Gooseneck mount for Acti 2MP PoE+ cameras with adjustable positioning

• Flexible gooseneck design without bracket for discreet indoor mounting
• PoE+ (802.3at) powered, compatible with Acti 2MP camera systems
• Adjustable positioning geometry for optimized sightlines in surveillance setups

ACTi · PMAX-0305

Acti PMAX-0305 Heavy Duty Wall Mount

Heavy duty wall mount for ACTi fixed cameras with PoE+ power

• Supports PoE+ (802.3at) cameras, eliminating separate power runs to the mount location.
• Zinc-plated steel construction resists corrosion in indoor and semi-outdoor commercial environments.
• Verified compatibility with ACTi ACM-7411, TCM-7411, and TCM-7811 fixed camera models.

ACTi · PMAX-0310

ACTi PMAX-0310 Wall Mount for KCM-3911

Dedicated wall mounting bracket engineered to install the ACTi KCM-3911 compact camera in fixed surveillance deployments

• Wall mount bracket designed for ACTi KCM-3911 compact camera
• Fixed-position wall install for retail, office, and corridor coverage
• Drops onto KCM-3911 camera mount points - no custom adapters needed

ACTi · PMAX-0311

Acti PMAX-0311 Indoor L-Type Wall Mount

L-type wall bracket for ACTi KCM-8111 2MP indoor surveillance

• Mounts KCM-8111 camera with flexible L-type positioning for corners
• PoE (802.3af) power delivery eliminates separate wiring at mount
• Indoor-rated wall installation for offices, retail, and secure facilities

ACTi · PMAX-0312

ACTi PMAX-0312 PTZ Wall Mount for I93-I96

Wall-mounted bracket engineered to secure PTZ cameras from the I93–I96 series

• Fits I93–I96 PTZ cameras directly—no adapters required for clean wall deployment.
• Stainless steel construction resists corrosion on exterior walls and building perimeters.
• Wall-mount design delivers stable PTZ positioning without ceiling or pendant infrastructure.

ACTi · PMAX-0313

ACTi PMAX-0313 Wall Mount for Indoor Domes

Fixed wall mount bracket designed for ACTi indoor dome cameras

• Fixed wall bracket mounts ACTi indoor domes directly to drywall or masonry.
• No pendant arm or ceiling drop needed — simplifies corridor and entry installs.
• Plan camera angle before drilling; bracket has no pan or tilt adjustment.