IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Pelco

SKU: MHXT3C000B

Pelco MHXT3C000B Stainless Housing Heater 120Vac

Stainless steel housing with heater for Pelco PTZ/thermal cameras
- Integrated 120 Vac heater maintains stable temps in cold-climate outdoor use
- Stainless steel construction resists corrosion in harsh surveillance environments
- Built-in sunshield reduces thermal stress on mounted Pelco camera systems
Special Order · Ships in 2-3 weeks

$9,087.21 $6,681.99 Save $2,405.22

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: MHXWBS

Pelco MHXWBS MHX NX Series Surface Wall Bracket

Direct surface wall mount for Pelco MHX, MHXT, and NX housings
- Heavy-duty industrial construction rated for concrete, masonry, and steel
- Integrated cable routing manages connections directly to camera housing
- NDAA Section 889 compliant for government and institutional deployments
Special Order · Ships in 2-3 weeks

$610.97 $449.99 Save $160.98

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: MHXWFWCA

Pelco MHXWFWCA Flush Wall Parapet Bracket

Flush wall and parapet-edge bracket for discrete MHX, MVX, NX housing mount
- Low-profile surface mount eliminates protruding hardware on walls and rooflines
- Compatible with Pelco MHX, MVX, and NX series camera housings
- Professional-grade construction, NDAA Section 889 compliant for federal projects
Special Order · Ships in 2-3 weeks

$294.99

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: MI3.9-10P

Pelco MI3.9-10P Varifocal P-Iris Lens 3.9-10mm

CS-mount varifocal lens, 3.9–10mm with P-iris for surveillance
Special Order · Ships in 2-3 weeks

$402.91 $296.99 Save $105.92

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: MI9-50P

Pelco MI9-50P CS-Mount 9-50mm Varifocal Lens

9–50mm CS-mount varifocal lens for license-plate and perimeter work
- 9–50mm focal range with P-iris depth-of-field control for dynamic lighting
- CS-mount design fits Pelco Sarix Pro 3 and compatible camera systems
- F2.0 aperture with 0.10 lux low-light performance for 24/7 surveillance
Special Order · Ships in 2-3 weeks

$705.64 $518.99 Save $186.65

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: MLX2830AA

Pelco MLX2830AA 850nm IR Illuminator 70deg

850nm IR illuminator with 70° beam for Pelco ExSite Pro systems
- 850nm wavelength with minimal red glow for semi-covert outdoor surveillance
- 70-degree beam angle matches standard camera lenses for even coverage
- Stainless steel housing with 24Vdc, 24Vac, or PoE power options
Special Order · Ships in 2-3 weeks

$2,615.97 $1,923.99 Save $691.98

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: MLX2W30AA

Pelco MLX2W30AA ExSite Pro White-Light Illuminator

White-light illuminator for color night surveillance on ExSite Pro systems
- 70-degree beam angle with white-light visible spectrum for true-color imaging
- 24 Vdc, 24 Vac, or PoE power options for flexible outdoor installation
- Stainless steel construction rated for outdoor environments
Special Order · Ships in 2-3 weeks

$2,403.87 $1,767.99 Save $635.88

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: MMXCABLARM10

Pelco MMXCABLARM10 10m Armored MMX Cable

10m armored cable for Pelco MMX cameras in hazardous areas
- 10-meter length with armored construction shields cable from physical damage
- Integral barrier cable gland seals entry for classified hazardous environments
- Multi-pole assembly integrates with MMX multi-sensor camera systems
Special Order · Ships in 2-3 weeks

$700.00 $514.99 Save $185.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: MMXCABLARM4

Pelco MMXCABLARM4 4m Armored MMX Cable

4m armored cable for Pelco MMX cameras with barrier gland protection
- 4-meter length connects junction boxes to camera housings in outdoor setups
- Armored construction resists physical damage, rodents, and environmental hazards
- Integral barrier gland maintains IP rating compliance at cable entry points
Special Order · Ships in 2-3 weeks

$550.00 $404.99 Save $145.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: MMXCWCOL

Pelco MMXCWCOL Camera Window Color Collar

Cosmetic trim ring for MMX Series cameras—blends into any interior
- Drop-in installation with no tools required; zero impact on optical performance
- Matches standard ceiling and wall colors to reduce camera visibility
- IP ratings and all camera functions remain unchanged after installation
In stock · Ships same business day

$87.99

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: MPX2CABL101

Pelco MPX2CABL101 10m Unarmored Cable

10m unarmored cable for MPX2 cameras with sealed conduit entry
- Barrier gland termination maintains IP66 rating at connection point
- Route through enclosed conduit, cable tray, or trunking installations
- NDAA Section 889 compliant for regulated surveillance deployments
Special Order · Ships in 2-3 weeks

$1,315.44 $967.99 Save $347.45

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: MPX2CABL41

Pelco MPX2CABL41 4m Unarmored Cable with Barrier Gland

4m MPX2 cable with barrier gland for conduit-protected routing
- Unarmored construction for flexible routing through enclosed pathways
- Integral barrier gland seals conduit entry against moisture ingress
- NDAA Section 889 compliant for government surveillance deployments
Special Order · Ships in 2-3 weeks

$878.12 $645.99 Save $232.13

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: MPX2CABLARM101

Pelco MPX2CABLARM101 10m Armored Cable

10m armored cable for MPX2 cameras in exposed routing environments
- Armored construction shields against mechanical damage and rodent intrusion
- Barrier gland included for sealed conduit entry and moisture protection
- IP66/IP67 rated for exposed and semi-exposed pathway installations
Special Order · Ships in 2-3 weeks

$1,315.44 $967.99 Save $347.45

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: MPX2CABLARM41

Pelco MPX2CABLARM41 4m Armored Cable with Barrier Gland

4m armored cable with sealed barrier gland for MPX2 cameras
- Armored conductor protection shields against physical damage in exposed routing
- Barrier gland provides dust and moisture sealing for hazardous environments
- Compatible with MPX2 camera series installations requiring mechanical durability
Special Order · Ships in 2-3 weeks

$878.12 $645.99 Save $232.13

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: MPXCOL

Pelco MPXCOL MPX Series Pole Mount Adapter

IP66 pole mount adapter for Pelco MPX Series cameras on vertical structures
- Direct MPX bracket compatibility—no alternative hardware or modifications needed
- IP66 dust-tight, spray-resistant housing for outdoor pole and mast installations
- Elevates camera placement for unobstructed line-of-sight in traffic and perimeter monitoring
In stock · Ships same business day

$783.99

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: MPXCW

Pelco MPXCW MPX Series Corner Mount Adapter

Corner mount adapter for MPX Series housings at wall/ceiling junctions
- IP66, NEMA 4X rated for outdoor and harsh indoor environments
- Standard MPX housing interface integrates with existing Pelco camera systems
- Purpose-built for corner junction positioning to optimize field of view coverage
Special Order · Ships in 2-3 weeks

$319.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Pelco MHXT3C000B Stainless Housing Heater 120Vac

Pelco MHXWBS MHX NX Series Surface Wall Bracket

Pelco MHXWFWCA Flush Wall Parapet Bracket

Pelco MI3.9-10P Varifocal P-Iris Lens 3.9-10mm

Pelco MI9-50P CS-Mount 9-50mm Varifocal Lens

Pelco MLX2830AA 850nm IR Illuminator 70deg

Pelco MLX2W30AA ExSite Pro White-Light Illuminator

Pelco MMXCABLARM10 10m Armored MMX Cable

Pelco MMXCABLARM4 4m Armored MMX Cable

Pelco MMXCWCOL Camera Window Color Collar

Pelco MPX2CABL101 10m Unarmored Cable

Pelco MPX2CABL41 4m Unarmored Cable with Barrier Gland

Pelco MPX2CABLARM101 10m Armored Cable

Pelco MPX2CABLARM41 4m Armored Cable with Barrier Gland

Pelco MPXCOL MPX Series Pole Mount Adapter

Pelco MPXCW MPX Series Corner Mount Adapter

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading

Certified Experts

Manufacturer Authorized

Expert Access

Since 2014

Brands

Categories

IP Cameras

Ordering

Legal

Company

Sales & Expert Advice

Customer Service