IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
i-PRO

SKU: WV-QJB506-B

i-PRO WV-QJB506-B Base Bracket Black

Aluminum bracket for i-PRO fixed cameras, wall/ceiling/corner mount
- Aluminum die cast with black finish rated –50°C to +60°C outdoors
- Supports wall, ceiling, and corner installations with included M5 screws
- Compact 197 × 50 × 138 mm footprint for discrete camera positioning
Special Order · Ships in 2-3 weeks

$174.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QLR100-W

i-PRO WV-QLR100-W Light Rail Mounting Bracket

Light rail mounting bracket for i-PRO systems, 1 kg capacity
- Aluminum alloy and PA/ABS construction rated −50°C to +60°C
- Compatible with standard tripod mount cameras on i-PRO rail systems
- Compact 63.5 mm × 32 mm × 135 mm profile, 130 g weight
Special Order · Ships in 2-3 weeks

$144.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QPL500-B

i-PRO WV-QPL500-B Pole Mount Bracket Black

Pole mount bracket for i-PRO cameras, indoor and outdoor surveillance
- Black finish bracket designed for pole installation on i-PRO camera systems
- Compatible with WV-X15xx series cameras for fixed surveillance deployments
- Supports both indoor and outdoor surveillance applications with stable mounting
Special Order · Ships in 2-3 weeks

$292.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QPL500-W RB

i-PRO WV-QPL500-W RB Pole Mount Bracket

Pole and wall mount bracket for i-PRO cameras, die-cast aluminum
- Die-cast aluminum with white powder coat resists UV and corrosion
- Mounts on concrete, masonry, steel, and wood surfaces securely
- Distributed weight design prevents camera drift and settling
Special Order · Ships in 2-3 weeks

$110.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QPL500S-W

i-PRO WV-QPL500S-W Pole Mount Bracket

Pole mount bracket with die-cast aluminum for outdoor surveillance
- Die-cast aluminum construction with powder-coated white finish resists corrosion and UV damage
- Operating range -50°C to +60°C handles extreme weather in outdoor deployments
- ISO 14993 compliant design for secure vertical post installation on perimeter surveillance
Special Order · Ships in 2-3 weeks

$200.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QRM001

i-PRO WV-QRM001 Black Vertical Mount Bracket

Vertical mount bracket for i-PRO camera systems in black finish
- Discrete black powder-coat construction for professional installations
- Engineered for i-PRO camera compatibility with secure mounting
- IK10-rated durability and IP67 weather resistance for outdoor use
Special Order · Ships in 2-3 weeks

$76.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QRM101

i-PRO WV-QRM101 Rack Mount Bracket

19-inch rack mount bracket for i-PRO equipment in standard installations
- Mounts securely in standard 19-inch rack systems for organized deployments
- Black powder-coat finish maintains professional appearance in data centers
- Purpose-engineered for i-PRO camera and accessory compatibility
Special Order · Ships in 2-3 weeks

$76.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QRM201

i-PRO WV-QRM201 Black Wall Mount Bracket

Black wall mount bracket for i-PRO camera systems, indoor/outdoor
- Adjustable positioning support for flexible camera angle installation
- IP67-rated, IK10 impact-resistant construction for outdoor durability
- Compatible across i-PRO camera portfolio for unified deployments
Special Order · Ships in 2-3 weeks

$42.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QSR500-W

i-PRO WV-QSR500-W White Sun Shade

White sun shade cuts glare and heat for i-PRO IP cameras
- UV-reflective white construction reduces lens flare and overheating
- Protects camera optics from UV radiation and weather damage
- Compatible with multiple i-PRO IP surveillance camera models
Special Order · Ships in 2-3 weeks

$112.68 $88.99 Save $23.69

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QSR501-B

i-PRO WV-QSR501-B 4-Screw Black Wall Mount Bracket

4-screw wall bracket for i-PRO dome cameras, black finish
- 4-screw configuration distributes load evenly for stable mounting
- Black powder-coat finish blends seamlessly in indoor surveillance
- Compatible with i-PRO dome camera models for direct installation
Special Order · Ships in 2-3 weeks

$154.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QSR501-W

i-PRO WV-QSR501-W Wall Mount Bracket for Dome Cameras

White wall mount bracket for dome cameras with 4-screw secure fit
- 4-screw attachment distributes load and resists vibration in fixed indoor setups
- White finish blends into standard ceiling and wall infrastructure
- Wall-mount design allows flexible positioning without overhead drilling
In stock · Ships same business day

$139.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QSR501F-W

i-PRO WV-QSR501F-W ISO Female White Wall Mount Bracket

White wall-mount bracket with ISO female thread for i-PRO dome cameras
- 1.5" Rp thread specification ensures secure, vibration-resistant mechanical mounting
- Low-profile white finish integrates seamlessly into ceiling and wall installations
- Fixed positioning design simplifies retrofit deployments without overhead anchoring
In stock · Ships same business day

$136.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QSR501F1-W

i-PRO WV-QSR501F1-W White Wall Mount Bracket for Dome Cameras

Wall mount bracket for i-PRO dome cameras with 1.5" NPS connection
- 1.5" NPS female ANSI thread fits i-PRO dome cameras without re-drilling
- White powder-coat finish blends into light interior surfaces
- Compact wall-mounted form factor for corridors and entry points
In stock · Ships same business day

$101.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QSR501M-W

i-PRO WV-QSR501M-W ISO Male White Wall Mount Bracket

ISO male wall bracket for dome cameras indoors and outdoors
- 1.5-inch radius design allows flexible viewing angle adjustment
- White powder-coat finish resists corrosion in mixed environments
- ISO male connector integrates with compatible i-PRO dome systems
Special Order · Ships in 2-3 weeks

$136.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QSR502A-W

i-PRO WV-QSR502A-W Wall Mount Bracket for Dome Cameras

Wall mount bracket for i-PRO dome cameras with 4-screw design
- Four-screw fastening spreads load across multiple anchor points
- White powder-coat finish blends into standard indoor environments
- Rigid mounting platform minimizes vibration and camera drift
In stock · Ships same business day

$68.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QSR503F-W

i-PRO WV-QSR503F-W Wall Mount Bracket ISO 1.5 Rp

White wall mount bracket for i-PRO dome cameras with ISO 1.5" Rp connector
- ISO female connector with 1.5" Rp tapered pipe thread for standardized coupling
- Powder-coated steel construction rated for indoor and outdoor wall installations
- 11.02 lbs capacity supports secure mounting of compatible i-PRO dome network cameras
Special Order · Ships in 2-3 weeks

$85.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

i-PRO WV-QJB506-B Base Bracket Black

i-PRO WV-QLR100-W Light Rail Mounting Bracket

i-PRO WV-QPL500-B Pole Mount Bracket Black

i-PRO WV-QPL500-W RB Pole Mount Bracket

i-PRO WV-QPL500S-W Pole Mount Bracket

i-PRO WV-QRM001 Black Vertical Mount Bracket

i-PRO WV-QRM101 Rack Mount Bracket

i-PRO WV-QRM201 Black Wall Mount Bracket

i-PRO WV-QSR500-W White Sun Shade

i-PRO WV-QSR501-B 4-Screw Black Wall Mount Bracket

i-PRO WV-QSR501-W Wall Mount Bracket for Dome Cameras

i-PRO WV-QSR501F-W ISO Female White Wall Mount Bracket

i-PRO WV-QSR501F1-W White Wall Mount Bracket for Dome Cameras

i-PRO WV-QSR501M-W ISO Male White Wall Mount Bracket

i-PRO WV-QSR502A-W Wall Mount Bracket for Dome Cameras

i-PRO WV-QSR503F-W Wall Mount Bracket ISO 1.5 Rp

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading

Certified Experts

Manufacturer Authorized

Expert Access

Since 2014

Brands

Categories

IP Cameras

Ordering

Legal

Company

Sales & Expert Advice

Customer Service