IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
i-PRO

SKU: PWM485S

i-PRO PWM485S Pendant Shroud Wall Bracket

Wall bracket pendant shroud for i-PRO domes with IP66 weatherproofing
- Die-cast aluminum construction with powder coat resists corrosion outdoors
- 1.5m pendant extension optimizes IR performance and eliminates glare wash-out
- 24VAC connectivity with wall-mount design for secure, stable camera positioning
Special Order · Ships in 2-3 weeks

$130.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: PWM71W

i-PRO PWM71W Wall Mount Bracket

Wall mount bracket for i-PRO cameras, indoor/outdoor use
- Compatible with select i-PRO camera models for fixed surveillance
- Durable engineered construction rated IP67 and IK10 for harsh conditions
- Simple installation design for vertical surface mounting and alignment
Special Order · Ships in 2-3 weeks

$107.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WJ-HXE410

i-PRO WJ-HXE410 Hard Disk Extension Unit

USB hard disk expansion for i-PRO surveillance systems
- Scales storage capacity for multi-site enterprise deployments
- HTTPS encryption protects recorded footage in transit and at rest
- WDR support captures clear video across high-contrast lighting
Special Order · Ships in 2-3 weeks

$3,488.69 $2,749.99 Save $738.70

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-CS5S

i-PRO WV-CS5S Smoke Dome Cover

Smoke dome cover for i-PRO cameras; reduces glare and dust
- Smoke-tinted polycarbonate reduces glare in bright or reflective spaces
- Protective barrier against dust, smoke, and environmental contaminants
- Ceiling-mount design integrates with i-PRO dome surveillance systems
Special Order · Ships in 2-3 weeks

$125.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-CW7S

i-PRO WV-CW7S Smoke Dome Cover

Dome cover shields i-PRO cameras from smoke and steam in kitchens and manufacturing
- Filters smoke, steam, and airborne particulates without optical distortion
- White dome form factor integrates with i-PRO dome camera installations
- Indoor-rated accessory for high-particulate environments like kitchens and server rooms
In stock · Ships same business day

$76.27 $58.99 Save $17.28

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-CW7SN RB

i-PRO WV-CW7SN RB Smoked Dome Housing

Smoked dome housing for outdoor vandal cameras with anti-glare coating
- High-impact polycarbonate with smoked tint resists impact and tampering
- Clearsight coating reduces glare, reflections, and condensation buildup
- Drop-in rebox replacement for i-PRO vandal dome camera bases
Special Order · Ships in 2-3 weeks

$108.00 $34.99 Save $73.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-PM500

i-PRO WV-PM500 Compact Microphone Unit

IP65 compact microphone unit for 24/7 audio with i-PRO cameras
- IP65 dust and water resistance for outdoor and washdown environments
- Continuous day/night audio capture independent of lighting conditions
- ONVIF compatible integration into existing multi-vendor VMS platforms
In stock · Ships same business day

$165.37 $130.99 Save $34.38

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-Q105A

i-PRO WV-Q105A Ceiling Mount Bracket

Flush ceiling mount bracket for i-PRO dome cameras in indoor spaces
- Flush-mounted design keeps camera tight to ceiling surface
- Compatible with i-PRO dome camera product family
- White housing suited for office, retail, education, warehouse use
In stock · Ships same business day

$103.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-Q122A

i-PRO WV-Q122A Fine Silver Wall Mount Bracket

Wall mount bracket for i-PRO cameras with fine silver corrosion-resistant finish
- Fine silver finish resists corrosion in indoor surveillance deployments
- Wall mount configuration positions i-PRO cameras with secure, stable positioning
- Engineered metal construction supports fixed indoor camera installations
Special Order · Ships in 2-3 weeks

$96.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-Q158C

i-PRO WV-Q158C Clear Wall Mount Bracket

Clear acrylic wall bracket for i-PRO dome cameras
- Transparent design minimizes visual obstruction in indoor/outdoor setups
- Compatible with i-PRO dome systems supporting audio and day/night operation
- Wall-mounted configuration integrates into retail, office, and commercial spaces
Special Order · Ships in 2-3 weeks

$276.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-Q159C

i-PRO WV-Q159C Clear Embedded Ceiling Mount

Clear embedded ceiling mount for i-PRO dome cameras with day/night vision
- Flush-mounted design integrates into drop and hard ceilings with minimal visual impact
- Compatible with i-PRO dome cameras featuring day/night and night vision capabilities
- Integrated cable pathway keeps wiring organized and concealed within ceiling structure
Special Order · Ships in 2-3 weeks

$242.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-Q161

i-PRO WV-Q161 Inner Dome Cover

Genuine i-PRO replacement dome cover for ceiling-mounted indoor cameras
- Optical clarity protective lens shield maintains surveillance performance
- Ceiling-mounted dome form factor fits i-PRO camera product line
- Indoor environment rated accessory extends camera lifespan and protection
Special Order · Ships in 2-3 weeks

$57.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-Q188

i-PRO WV-Q188 Pole Mount Bracket Silver

Pole and wall mount bracket for i-PRO cameras with weather-resistant aluminum
- Die-cast aluminum with powder coat resists corrosion and UV degradation outdoors
- Dual-mount design supports both vertical pole and wall installation configurations
- Stable positioning for perimeter security, traffic monitoring, and facility access control
Special Order · Ships in 2-3 weeks

$176.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QAT100

i-PRO WV-QAT100 Inner Dome Cover Replacement

UV-stabilized replacement dome cover for i-PRO cameras; 3–5 year clarity
- Tinted polycarbonate construction conceals camera aim and lens glint
- UV stabilization resists yellowing and haze in outdoor/window deployments
- Operates -10°C to +50°C; environmental sealing blocks dust and moisture
In stock · Ships same business day

$75.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QAT501-S

i-PRO WV-QAT501-S 1.5 Inch Silver Pipe Bracket

1.5" pipe bracket for i-PRO cameras, indoor/outdoor rated
- Mounts directly to 1.5-inch conduit or structural pipe without adapters
- Silver finish resists corrosion and UV fading in outdoor environments
- Mechanical fasteners included; ready to bolt camera head to bracket
In stock · Ships same business day

$83.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QAT502-G

i-PRO WV-QAT502-G Gangbox Adapter Gray

Gangbox dome adapter with PoE power and HTTPS encryption
- Direct gangbox mount eliminates custom brackets and field adaptation
- PoE power and data over single Ethernet cable, no separate supply
- Gray finish blends into ceiling infrastructure for discrete appearance
In stock · Ships same business day

$68.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

i-PRO PWM485S Pendant Shroud Wall Bracket

i-PRO PWM71W Wall Mount Bracket

i-PRO WJ-HXE410 Hard Disk Extension Unit

i-PRO WV-CS5S Smoke Dome Cover

i-PRO WV-CW7S Smoke Dome Cover

i-PRO WV-CW7SN RB Smoked Dome Housing

i-PRO WV-PM500 Compact Microphone Unit

i-PRO WV-Q105A Ceiling Mount Bracket

i-PRO WV-Q122A Fine Silver Wall Mount Bracket

i-PRO WV-Q158C Clear Wall Mount Bracket

i-PRO WV-Q159C Clear Embedded Ceiling Mount

i-PRO WV-Q161 Inner Dome Cover

i-PRO WV-Q188 Pole Mount Bracket Silver

i-PRO WV-QAT100 Inner Dome Cover Replacement

i-PRO WV-QAT501-S 1.5 Inch Silver Pipe Bracket

i-PRO WV-QAT502-G Gangbox Adapter Gray

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading

Certified Experts

Manufacturer Authorized

Expert Access

Since 2014

Brands

Categories

IP Cameras

Ordering

Legal

Company

Sales & Expert Advice

Customer Service