IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Honeywell

SKU: OIA-STD2ENT-1M

Honeywell OIA-STD2ENT-1M Wired Operational Interface

Wired operational interface for Honeywell warehouse automation systems
- Fixed hardwired network integration eliminates RF interference in high-density environments
- Compatible with Honeywell scanning and mobility platforms across warehouse and logistics
- Supports warehouse automation, point-of-service, and logistics command center deployments
Special Order · Ships in 2-3 weeks

$2.14 $1.99 Save $0.15

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: OIA-STD2PRO-1M

Honeywell OIA-STD2PRO-1M Wired Scanner

Wired 1D/2D barcode scanner for retail POS and warehouse stations
- 1D/2D barcode reading with USB/Serial wired connection for reliable POS integration
- USB-powered operation eliminates battery management at fixed checkout stations
- Hardwired design supports high-volume scanning in retail and warehouse environments
Special Order · Ships in 2-3 weeks

$0.99

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: OPT78-2983-01

Honeywell OPT78-2983-01 Mount Bracket

Genuine Honeywell mount bracket for warehouse and field service operations
- OEM accessory engineered for secure device positioning in 24/7 enterprise environments
- Compatible with Honeywell device series; maintains original manufacturer coverage
- Standardizes fleet-wide mounting across distribution centers and field deployments
Special Order · Ships in 2-3 weeks

$598.56 $430.99 Save $167.57

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Honeywell

SKU: PB-TRI-POD

Honeywell PB-TRI-POD Tripod Mount for PBCAM Cameras

Tool-free tripod mount for Honeywell PBCAM mobile surveillance
- Three-point stance handles uneven floors in warehouses and event venues
- No tools required—reposition or relocate cameras in seconds
- Lightweight portable design fits one-person setup and transport
In stock · Ships same business day

$235.99

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: PC45D00NA00201

Honeywell PC45D00NA00201 Mobile Computer

Wi-Fi mobile computer with 2D scanning for warehouse and field ops
- 2D barcode scanner reads QR codes, Data Matrix, and standard barcodes
- 4900mAh battery runs 8–12 hours on typical shifts without recharging
- Lightweight handheld design for scanning and data entry across job sites
Special Order · Ships in 2-3 weeks

$1,564.99 $1,533.99 Save $31.00

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: PC45D21NA01301

Honeywell PC45D21NA01301 Thermal Mobile Computer

2D barcode scanner + thermal imaging in one rugged mobile computer
- 2D barcode scanning with integrated thermal imaging for inventory and inspection
- 4900mAh battery supports full-shift field operations in warehouses and facilities
- Wi-Fi connectivity for indoor logistics, asset tracking, and thermal anomaly detection
Special Order · Ships in 2-3 weeks

$2,049.99 $2,008.99 Save $41.00

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: PC45T01NA01201

Honeywell PC45T01NA01201 Mobile Computer

Wi-Fi mobile computer for warehouse and retail scanning operations
- 4900mAh battery supports full-shift inventory and barcode scanning
- Wi-Fi connectivity integrates with existing warehouse infrastructure
- Portable data collection for real-time logistics and asset tracking
Special Order · Ships in 2-3 weeks

$2,091.99 $2,050.99 Save $41.00

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: PERSIST-SFT1

Honeywell PERSIST-SFT1 NC/NR Session License

Session-based license for Honeywell warehouse and retail scanning systems
- Non-concurrent, non-renewable session licensing for scanning and mobility
- Supports warehouse, retail, and logistics operation deployments
- Integrates with Honeywell scanning and mobility platform architecture
Special Order · Ships in 2-3 weeks

$659.99 $646.99 Save $13.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Honeywell

SKU: PRO22BAT1

Honeywell PRO22BAT1 12V 7AH Replacement Battery

12V 7AH replacement battery for Honeywell PRO4200/PRO3200
- 12V 7AH capacity sustains extended warehouse and logistics operations
- Direct replacement for PRO4200 and PRO3200 mobile computer platforms
- Wired connectivity support for continuous scanning and data collection
In stock · Ships same business day

$65.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Honeywell

SKU: PRO22DCC

Honeywell PRO22DCC Daisy Chain Wired Mobile Computer Accessory

Wired daisy chain connectivity for PRO2200/PRO3200 mobile computers
- Multi-device hardwired topology eliminates RF dead zones in dense warehouse environments
- Direct connection to PRO2200 and PRO3200 series—no firmware updates required
- Persistent wired link removes wireless interference and congestion dependencies
In stock · Ships same business day

$246.99 $241.99 Save $5.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Honeywell

SKU: PRO42E1D10

Honeywell PRO42E1D10 10-Door Access Control Kit

Hardwired 10-door access control kit with 4 readers and expandable to 19 doors
- 10 doors configured out of the box with 4x PRO42R2 readers for multi-entry deployments
- Wired connectivity eliminates signal loss, RF interference, and battery maintenance
- Expands to 19 doors with up to 9 additional modules; integrated anti-tamper monitoring
In stock · Ships same business day

$8,772.00 $6,232.99 Save $2,539.01

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: PRO42E1D4

Honeywell PRO42E1D4 Commercial Security Door Kit

Wired mobile computer door kit for Honeywell security systems
- Includes PRO42R2 mobile computer for field diagnostics and setup
- Wired connectivity ensures reliable hardwired system integration
- Purpose-built accessory compatible with Honeywell commercial platforms
Special Order · Ships in 2-3 weeks

$4,139.99 $4,058.99 Save $81.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Honeywell

SKU: PRO42E1D6

Honeywell PRO42E1D6 Mobile Computer Door Kit

Dual PRO42R2 mobile computers with wired connectivity for fixed stations
- Two mobile computer units in one kit for multi-station deployments
- Wired connectivity eliminates battery dependency for continuous operation
- Compatible with PRO42 series for warehouse and logistics workflows
In stock · Ships same business day

$6,732.00 $4,782.99 Save $1,949.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Honeywell

SKU: PRO42E1EN

Honeywell PRO42E1EN Commercial Security Mobile Computer

Wired mobile computer for commercial security field operations
- Wired connectivity for stationary and mobile security deployments
- Integrates with Honeywell PRO22ENC1, PRO42IC, and PSU power units
- Purpose-built for security integrators and enterprise system installers
In stock · Ships same business day

$3,400.99 $3,333.99 Save $67.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Honeywell

SKU: PRO42IC

Honeywell PRO42IC Control Module for PRO4200

Wired 2-door control module with 1MB onboard memory for PRO4200
- Manages up to 2 independent door locks with local credential storage
- 1 MB flash memory stores 500–1000+ credentials for offline operation
- LED status indicators and backup battery support for reliability
In stock · Ships same business day

$1,988.99 $1,949.99 Save $39.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Honeywell

SKU: PRO42IN

Honeywell PRO42IN Input Board Mobile Computer Wired Connectivity Expansion

Wired input expansion for Honeywell mobile computers—no wireless interference
- Hardwired connectivity eliminates RF interference and signal dropout in dense environments
- Modular design scales sensor input capacity without replacing primary mobile computer
- Direct integration with Honeywell mobile computer platform for security deployments
In stock · Ships same business day

$1,089.70 $774.99 Save $314.71

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Honeywell OIA-STD2ENT-1M Wired Operational Interface

Honeywell OIA-STD2PRO-1M Wired Scanner

Honeywell OPT78-2983-01 Mount Bracket

Honeywell PB-TRI-POD Tripod Mount for PBCAM Cameras

Honeywell PC45D00NA00201 Mobile Computer

Honeywell PC45D21NA01301 Thermal Mobile Computer

Honeywell PC45T01NA01201 Mobile Computer

Honeywell PERSIST-SFT1 NC/NR Session License

Honeywell PRO22BAT1 12V 7AH Replacement Battery

Honeywell PRO22DCC Daisy Chain Wired Mobile Computer Accessory

Honeywell PRO42E1D10 10-Door Access Control Kit

Honeywell PRO42E1D4 Commercial Security Door Kit

Honeywell PRO42E1D6 Mobile Computer Door Kit

Honeywell PRO42E1EN Commercial Security Mobile Computer

Honeywell PRO42IC Control Module for PRO4200

Honeywell PRO42IN Input Board Mobile Computer Wired Connectivity Expansion

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading

Certified Experts

Manufacturer Authorized

Expert Access

Since 2014

Brands

Categories

IP Cameras

Ordering

Legal

Company

Sales & Expert Advice

Customer Service