IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Hanwha

SKU: SMT-3221PV

Hanwha SMT-3221PV 32in AI Public View Monitor

32in display with integrated 2MP camera and AI analytics for retail
- 2MP camera with f1.6 lens, 107.7° FOV, 0.03 lux low-light performance
- AI object classification, face detection, loitering, line crossing, people counting
- H.265/H.264 compression, 120dB WDR, PoE++ powered, steel indoor cabinet
Special Order · Ships in 2-3 weeks

$2,350.00 $1,575.99 Save $774.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SPA-B1000

Hanwha SPA-B1000 IP Audio Bridge

Stereo audio bridge with 10W amp and PoE power for IP systems
- Accepts stereo line-level audio (±6 dBV) directly from mixers, intercoms, or audio sources
- 10W Class D amplifier drives small speaker loads or downstream audio devices
- PoE-powered (802.3af, 10W max) with gigabit ethernet—no separate power cable needed
In stock · Ships same business day

$601.00 $403.99 Save $197.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SPA-M2000

Hanwha SPA-M2000 Desktop SIP Microphone

Desktop SIP microphone with PoE power and built-in speaker amplifier
- Native SIP protocol integration for direct VoIP and IP audio system connection
- Dual power options: PoE or DC24V, max 12W consumption for flexible deployment
- 1W monitor amplifier at 8Ω impedance supports direct speaker connection
In stock · Ships same business day

$1,687.00 $1,131.99 Save $555.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SPB-300HM8

Hanwha SPB-300HM8 Hanging Mount

Aluminum hanging mount for Hanwha cameras indoors and outdoors
- Precise angle positioning for optimal camera coverage in any layout
- High-grade aluminum construction resists corrosion in outdoor conditions
- Compatible with XND, PND-9080R, and SND series Hanwha cameras
Special Order · Ships in 2-3 weeks

$49.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SPB-FCD85W

Hanwha SPB-FCD85W Tinted Dome Bubble

Tinted dome bubble for Hanwha flush-mount cameras with IP52 protection
- Transparent smoked polycarbonate obscures camera direction while maintaining image clarity
- IP52 rating protects against dust and low-pressure water jets in controlled indoor spaces
- Compact Ø205 x 78mm aluminum base integrates flush with low-profile camera housings
In stock · Ships same business day

$75.00 $50.99 Save $24.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SPB-IND11

Hanwha SPB-IND11 Smoked Dome Cover, Ivory

Smoked dome cover for Hanwha XND-series cameras, ivory finish
- Smoked optical element cuts glare and reflections for clear video
- Compatible with XND-6010, XND-6020, XND-8020R, XND-8030R, XND-8040R
- High-quality construction protects against dust, debris, and moisture
Special Order · Ships in 2-3 weeks

$25.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SPB-IND6

Hanwha SPB-IND6 Smoked Dome Cover, Ivory

Smoked ivory dome cover for indoor IP cameras with anti-glare finish
- Polycarbonate construction protects camera optics from dust and debris
- Smoked tint reduces glare and reflection while maintaining visibility
- Includes mounting hardware for quick installation on indoor dome cameras
Special Order · Ships in 2-3 weeks

$39.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SPB-IND85W

Hanwha SPB-IND85W Tinted Dome Bubble

Tinted dome bubble for indoor cameras with IP52 dust/moisture protection
- Smoked polycarbonate obscures camera direction for discreet surveillance
- IP52 rated aluminum base handles standard indoor dust and moisture exposure
- Compact Ø158 x 87mm form fits XND and PND Hanwha camera platforms
In stock · Ships same business day

$75.00 $50.99 Save $24.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SPB-IND88W

Hanwha SPB-IND88W Tinted Dome Cover

Tinted dome cover with glare reduction for XND-series cameras
- Polycarbonate tinted bubble cuts glare and reflections while maintaining image clarity
- Durable aluminum housing with weather-resistant construction, IK10 rated
- Compact design (Ø150 x 80.8mm, 243g) fits XND-C6083RV through XND-C9083RV
In stock · Ships same business day

$53.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SPB-INW12

Hanwha SPB-INW12 Tinted Bubble Dome Cover

Smoked dome cover for Wisenet Q/L 2MP indoor cameras with covert design
- Tinted bubble dome reduces glare and reflections for cleaner video capture
- White casing blends into modern interiors while concealing lens from view
- Compatible with Wisenet Q and L series 2MP fixed indoor dome cameras
Special Order · Ships in 2-3 weeks

$16.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SPB-INW13

Hanwha SPB-INW13 Tinted Bubble Dome Cover

Smoked dome cover for Hanwha 5MP Q series—discrete lens concealment
- Tinted bubble design conceals camera lens while maintaining image clarity
- White housing mounts indoors on ceiling or wall with clean integration
- Compatible with Hanwha 5MP Wisenet Q series fixed lens cameras
Special Order · Ships in 2-3 weeks

$16.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SPB-INW72

Hanwha SPB-INW72 Tinted Dome Cover

Tinted dome cover for discrete indoor camera installations
- Smoked lens design hides camera while maintaining clear surveillance sight lines
- White finish integrates with interior spaces in offices, retail, and corporate settings
- Durable construction rated IP67 and IK10 for long-term mounting stability
In stock · Ships same business day

$16.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SPB-INW73

Hanwha SPB-INW73 Tinted Dome Cover White

White tinted dome cover for discreet indoor surveillance
- Tinted lens design conceals camera while maintaining clear monitoring
- White finish blends into modern office and retail interiors
- Durable protective construction shields against dust and impact
Special Order · Ships in 2-3 weeks

$16.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SPB-MDC31

Hanwha SPB-MDC31 Tinted Dome Cover

Tinted dome cover with glare reduction for multi-sensor cameras
- Smoked polycarbonate lens cuts glare and reflections in bright spaces
- Fits PNM-9084QZ (8MP) and PNM-8082VT (2MP) dome cameras with TR20 mount
- Aluminum base and 251mm dome withstand ceiling or wall installation
Special Order · Ships in 2-3 weeks

$95.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SPB-MDC41

Hanwha SPB-MDC41 Tinted Dome Cover

Tinted dome cover for Hanwha multi-sensor PTZ cameras with glare reduction
- 315mm tinted polycarbonate dome with light smoked finish reduces reflections
- TR20 screw thread mount installs tool-free on PNM-9084RQZ and PNM-9085RQZ
- Lightweight aluminum housing at 1,100g minimizes load on mounting hardware
Special Order · Ships in 2-3 weeks

$230.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SPB-MDC41V

Hanwha SPB-MDC41V Smoke Dome Cover

Smoked dome cover cuts glare in high-sun surveillance deployments
- Transparent smoked polycarbonate lens reduces reflection without optical distortion
- TR20 screw mount for direct fit on Hanwha multi-sensor camera platforms
- IP66-rated aluminum base with white finish for outdoor dust and spray resistance
In stock · Ships same business day

$280.00 $209.99 Save $70.01

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Hanwha SMT-3221PV 32in AI Public View Monitor

Hanwha SPA-B1000 IP Audio Bridge

Hanwha SPA-M2000 Desktop SIP Microphone

Hanwha SPB-300HM8 Hanging Mount

Hanwha SPB-FCD85W Tinted Dome Bubble

Hanwha SPB-IND11 Smoked Dome Cover, Ivory

Hanwha SPB-IND6 Smoked Dome Cover, Ivory

Hanwha SPB-IND85W Tinted Dome Bubble

Hanwha SPB-IND88W Tinted Dome Cover

Hanwha SPB-INW12 Tinted Bubble Dome Cover

Hanwha SPB-INW13 Tinted Bubble Dome Cover

Hanwha SPB-INW72 Tinted Dome Cover

Hanwha SPB-INW73 Tinted Dome Cover White

Hanwha SPB-MDC31 Tinted Dome Cover

Hanwha SPB-MDC41 Tinted Dome Cover

Hanwha SPB-MDC41V Smoke Dome Cover

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading