IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Hanwha

SKU: AM07-015855A

Hanwha AM07-015855A Assembly Case Top

Genuine OEM case-top assembly for Hanwha PNM-A7083RVD systems
- Authentic Hanwha replacement component engineered to original specs
- White assembly case top designed for PNM-A7083RVD surveillance systems
- PoE-powered (802.3af) accessory for integrators and service technicians
Special Order · Ships in 2-3 weeks

$81.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: AM07-016348A

Hanwha AM07-016348A Case Top Assembly for QNV-C8083R

OEM case-top assembly for QNV-C8083R with IP66/IK10 protection
- Hard-coated white aluminum dome rated IP66 and IK10 vandal-resistant
- Compatible with single, double, and 4" octagon junction boxes
- FCC, CE, UKCA, and UL62368-1 certified for outdoor deployment
Special Order · Ships in 2-3 weeks

$65.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: AM08-005919A

Hanwha AM08-005919A Hanging Mount Assembly

Ceiling and pendant mount for Hanwha PNM-9320VQP cameras
- Secure hanging suspension with integrated cable management
- Professional-grade white construction rated for permanent installations
- Lightweight 1 lb assembly for easy deployment and repositioning
Special Order · Ships in 2-3 weeks

$198.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: AM08-005920B

Hanwha AM08-005920B Quad Camera Window Assembly

OEM quad camera window assembly for Hanwha PNM-9322VQP
- Multi-sensor optical window with OEM-grade mechanical components
- Purpose-built replacement for panoramic camera systems
- PoE powered (802.3af) quad window design for expanded coverage
Special Order · Ships in 2-3 weeks

$267.05 $196.99 Save $70.06

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: AM08-006021A

Hanwha AM08-006021A Window Quad Rubber Assembly

OEM window quad rubber assembly for PNM9320VQP camera sealing
- Maintains sealing and structural integrity for Hanwha surveillance systems
- Compatible with PNM9320VQP model line for direct replacement
- Genuine OEM component for qualified integrator and installer deployments
Special Order · Ships in 2-3 weeks

$251.58 $184.99 Save $66.59

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: AM08-006369A

Hanwha AM08-006369A Backbox Case Assembly

OEM backbox case assembly for Hanwha panoramic network cameras
- Authentic replacement housing and mounting for Hanwha panoramic camera models
- White case assembly rated for commercial, industrial, and enterprise security systems
- PoE-powered with microphone support for integrated audio and networking connectivity
Special Order · Ships in 2-3 weeks

$49.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: AM08-006619A

Hanwha AM08-006619A Hanging Mount Assembly

Pendant ceiling mount for PNM-9322VQP panoramic camera
- Hanging mount design for overhead ceiling or soffit installation
- Purpose-built for Hanwha PNM-9322VQP panoramic camera compatibility
- Lightweight 1 lb assembly supports retail, hospitality, and corporate surveillance
Special Order · Ships in 2-3 weeks

$140.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: AM08-006895A

Hanwha AM08-006895A Weather Cap Assembly

Weather cap assembly for XNV-9083R-V2 outdoor surveillance protection
- Shields camera from rain, snow, dust, and UV radiation in harsh climates
- Durable protective housing maintains optical clarity without image degradation
- OEM Hanwha component engineered for precise fit and reliable outdoor performance
Special Order · Ships in 2-3 weeks

$29.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: AM08-007591A

Hanwha AM08-007591A Assembly Mount for QNV-6012R

OEM assembly mount for Hanwha QNV-6012R network cameras
- White finish composite construction rated for indoor and outdoor use
- Designed specifically for QNV-6012R camera compatibility and secure installation
- Genuine OEM component engineered for surveillance deployment reliability
Special Order · Ships in 2-3 weeks

$41.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: AM16-000024

Hanwha AM16-000024 SATA Power Cable Assembly

SATA power cable assembly for Hanwha NVR and hybrid recorder storage
- SATA power connector for direct storage device integration in surveillance systems
- OEM component engineered for Hanwha NVRs and hybrid recorders
- White cable assembly rated for professional security installation deployments
Special Order · Ships in 2-3 weeks

$12.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: ARD-810-2TB

Hanwha ARD-810-2TB 8-Channel 5MP DVR 2TB Storage

8-channel analog + 2-IP hybrid DVR, 2TB storage, H.265 compression
- Mix 8 analog cameras (AHD/TVI/CVI) with 2 IP channels—migrate without full replacement
- 5MP half-res @ 12fps analog or 15fps @ 4MP; H.265 cuts storage ~50% vs H.264
- 40Mbps max bandwidth, dual HDMI 4K output, on-device 2TB SATA—no external NAS needed
In stock · Ships same business day

$592.00 $290.99 Save $301.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: AT-IE048-240

Hanwha AT-IE048-240 240W Industrial Power Supply

240W @ 48Vdc AC/DC supply for industrial network infrastructure
- 240W continuous output at 48Vdc for enterprise switches and edge equipment
- DIN rail mount fits standard cabinets and control enclosures with compact profile
- AC/DC conversion accepts universal input from commercial and industrial power sources
Special Order · Ships in 2-3 weeks

$850.00 $550.99 Save $299.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: AT-PWR1200

Hanwha AT-PWR1200 Secondary Hot Swap Power Supply

Redundant hot swap power supply for Hanwha security systems
- Secondary module operates in tandem with primary supply for fault tolerance
- Replace unit under load with zero downtime—no system shutdown required
- Enterprise-grade design for 24/7 mission-critical surveillance operations
Special Order · Ships in 2-3 weeks

$3,800.00 $2,461.99 Save $1,338.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: EP02-000918B

Hanwha EP02-000918B SNB-6011B Remote Head Camera Cable

RJ-12 remote head camera cable for SNB-6011B 2MP covert systems
- Connects camera head to control unit; supports 1920x1080 H.264 at 30fps
- Two-way audio plus 120dB wide dynamic range for low-light surveillance
- Compatible with face detection, tampering alerts, and SD/NAS recording
Special Order · Ships in 2-3 weeks

$10.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: EP02-000918C

Hanwha EP02-000918C BNC Cable Accessory

535mm BNC cable for Hanwha SID-560 analog video systems
- BNC 2-pin connector with 535mm length for flexible routing
- Professional-grade construction built for surveillance installations
- Direct compatibility with SID-560 series accessory ecosystem
Special Order · Ships in 2-3 weeks

$7.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: EP02-002129A

Hanwha EP02-002129A Harness Cable for SNV-6084R

OEM harness cable for SNV-6084R vandal dome camera systems
- Connects SNV-6084R camera to control infrastructure for reliable surveillance
- Rated for indoor/outdoor deployments with IP67 and IK10 protection
- White cable assembly integrates with Hanwha Vision Wisenet platform
Special Order · Ships in 2-3 weeks

$35.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Hanwha AM07-015855A Assembly Case Top

Hanwha AM07-016348A Case Top Assembly for QNV-C8083R

Hanwha AM08-005919A Hanging Mount Assembly

Hanwha AM08-005920B Quad Camera Window Assembly

Hanwha AM08-006021A Window Quad Rubber Assembly

Hanwha AM08-006369A Backbox Case Assembly

Hanwha AM08-006619A Hanging Mount Assembly

Hanwha AM08-006895A Weather Cap Assembly

Hanwha AM08-007591A Assembly Mount for QNV-6012R

Hanwha AM16-000024 SATA Power Cable Assembly

Hanwha ARD-810-2TB 8-Channel 5MP DVR 2TB Storage

Hanwha AT-IE048-240 240W Industrial Power Supply

Hanwha AT-PWR1200 Secondary Hot Swap Power Supply

Hanwha EP02-000918B SNB-6011B Remote Head Camera Cable

Hanwha EP02-000918C BNC Cable Accessory

Hanwha EP02-002129A Harness Cable for SNV-6084R

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading