Door Hardware & I/O
Sub categories
Showing Results for Door Hardware & I/O
-
HES
SKU: B100
HES B100 Multi-Voltage Accessory Board
Multi-voltage accessory board for mixed-power access control systems
- Supports 24VDC input with flexible voltage management across distributed installations
- Wiegand communication integrates with HES control panels and electric strike systems
- Compact board design reduces wiring complexity in commercial security deployments
$122.00 $65.99 Save $56.01The item has been added -
HES
SKU: BA-DPA-12
HES BA-DPA-12 Door Prop Alarm Timer 12VDC
12VDC door prop alarm timer with configurable detection threshold
- Detects prolonged door-open conditions and triggers integrated boxed speaker
- Configurable timer threshold for customized prop-open detection sensitivity
- Compatible with door position switches and magnetic contacts in standard enclosures
$363.00 $195.99 Save $167.01The item has been added -
HES
SKU: BA-DPA-24
HES BA-DPA-24 Door Prop Alarm Timer 24VDC
24VDC door prop timer with configurable alarm for access control
- Monitors door open duration and triggers alert when threshold exceeded
- 24VDC operation integrates with HES electric strike systems
- Compact timer module mounts discreetly for policy enforcement
$363.00 $195.99 Save $167.01The item has been added -
HES
SKU: BN-250
HES BN-250 1/4 Blind Nuts with Collapsing Tool
1/4 blind nuts with dedicated collapsing tool for security installations
- Dedicated collapsing tool prevents over-compression, protecting painted and anodized surfaces.
- 1/4 blind nuts compatible with camera brackets, control panels, and access control hardware.
- Repeatable deployment reduces per-installation rework, lowering labor cost across multi-site jobs.
$49.00 $26.99 Save $22.01The item has been added -
HES
SKU: BR-4
HES BR-4 Bridge Rectifier 4AMP Module
4-amp bridge rectifier module for HES access control power systems
- Full-wave bridge rectification converts AC to DC at 4-ampere rating
- Drop-in module design integrates with HES power supplies and cabinets
- Supports low-voltage distribution for door strikes and control circuits
$67.00 $36.99 Save $30.01The item has been added -
HES
SKU: CABLEW10-8
HES CABLEW10-8 Wiegand 8ft Extension Cable
8ft Wiegand extension cable with pre-terminated Molex for HES systems
- 10-conductor Wiegand protocol maintains signal integrity over extended runs
- Pre-terminated Molex connectors eliminate field termination and installation labor
- Rated for indoor and sheltered outdoor access control deployments
$93.00 $92.99 Save $0.01The item has been added -
Add to Cart The item has been addedHES
SKU: CBL12-QC12
HES CBL12-QC12 K200/KS200 Interface Cable 12ft
12ft interface cable for HES K200/KS200 access control systems
- 12-conductor design with Molex and pinned connector options for flexible field installation
- 12-foot length reaches across panel-mounted and distributed system configurations
- Compatible with both K200 and KS200 platforms for mixed hardware environments
$104.00 $103.99 Save $0.01The item has been added -
Add to Cart The item has been addedHES
SKU: CBL6-QC12
HES CBL6-QC12 K200/KS200 Lock Interface Cable
12-conductor cable for HES K200/KS200 locks, 6 feet with Molex connectors
- 12-conductor configuration routes complete signal and power to lock systems
- 6-foot length spans standard door frame installations in access control setups
- Keyed Molex connectors on both ends prevent cross-wiring during installation
In stock · Ships same business day$82.00 $81.99 Save $0.01The item has been added -
Add to Cart The item has been addedHES
SKU: CEPT-10
HES CEPT-10 Electrical Power Transfer Module
Centralized power hub for multi-door HES access control systems
- Distributes power from single supply to multiple control modules in parallel
- Installs in wiring closet or rack; reduces voltage drop on long cable runs
- Scales with upstream HES power supply capacity; no rewiring of core infrastructure
$490.00 $263.99 Save $226.01The item has been added -
HES
SKU: CEPT-NW
HES CEPT-NW Electrical Power Transfer Unit
Centralized power distribution for networked HES security systems
- Consolidates power across multi-device access control installations
- Reduces cable complexity in new deployments and retrofit applications
- Compatible with HES security control systems and networked architectures
$494.00 $265.99 Save $228.01The item has been added -
HES
SKU: CKL
HES CKL Cabinet Key Lock for Securitron BPS
Keyed cabinet lock for Securitron BPS enclosures—installs in knockout
- Fits Securitron BPS knockout apertures directly—no drilling or enclosure modification needed.
- Keyed mechanical lock restricts power supply access to authorized personnel only.
- At 0.25 lb and 2.8×3×1.1 in, installs without structural reinforcement in tight spaces.
$37.00 $19.99 Save $17.01The item has been added -
HES
SKU: CL-3
HES CL-3 Camlock with 2 Keys
Mechanical camlock for network cabinets and equipment racks
- Purely mechanical operation — no power, wiring, or configuration required for deployment.
- Ships with 2 keyed-alike keys, supporting multi-user enclosure access out of the box.
- Rack-mount compatible at 1.3 lb, minimizing hinge load on standard cabinet doors.
$17.00 $9.99 Save $7.01The item has been added -
HES
SKU: 1006CLB-630-LBM
HES Complete Electric Strike for Latchbolt - 1006CLB-630-LBM
- Fail-secure mode keeps the door locked during power loss, protecting perimeter openings.
- LBM latch bolt monitor confirms door closure status to the access control panel in real time.
- UL 1034 and UL 10C (3-hr fire) listed; 1,500 lb static strength rated for 1M cycles.
$1,064.00 $537.99 Save $526.01The item has been added -
HES
SKU: 1500C-629-LMS
HES Complete Electric Strike Kit - 1500C-629-LMS
- Complete kit—strike body, faceplate, lip, and hardware—eliminates mismatched component callbacks.
- LMS reports latch position and strike status to ACS panels, enabling forced-entry detection.
- Accepts 12/24 VDC or VAC with internal rectification; field-reversible for left or right hand.
$1,156.57 $575.99 Save $580.58The item has been added -
Add to Cart The item has been addedHES
SKU: 1500C-630-LMS
HES Complete electric strike Kit - 1500C-630-LMS
- Complete kit ships with strike body, faceplate, bracket, and hardware—no field fabrication needed.
- Integrated latchbolt monitor switch feeds real-time door status to your access control system.
- 630 satin stainless finish resists corrosion and aligns with standard commercial door hardware.
$888.00 $448.99 Save $439.01The item has been added -
HES
SKU: CP-14AWN
HES CP-14AWN Control Panel SG/SS
Centralized control panel for multi-zone access management in security operations
- SG/SS construction engineered for indoor control room and SOC environments
- Manages coordinated access across multiple entry points and security zones
- Integrates with HES and third-party access control platforms
$260.00 $143.99 Save $116.01The item has been added
Door Hardware & I/O
Door hardware and I/O components connect physical doors to your access control system. From electric strikes and magnetic locks to exit devices and relay modules, proper hardware selection ensures safe, compliant, and reliable operation.
Plan Your Deployment
- Fail-safe vs fail-secure lock configuration
- Door type (wood, metal, glass, storefront)
- Request-to-exit (REX) device requirements
- Power supply and voltage compatibility
- Local life-safety and fire code compliance
Door Hardware & I/O — Engineering-Grade Door Hardware for Commercial Deployments
This category covers 532 working models of door hardware & i/o sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Fail-safe versus fail-secure determines what happens during power loss. Fail-safe locks unlock on power loss (used on egress doors where life safety dominates); fail-secure locks remain locked (used on storage, server rooms, and exterior doors where security dominates). Code typically mandates fail-safe on stairwell and egress doors. Confirm with the AHJ before specifying — misapplied lock mode is a common code violation.
Strike, mortise, magnetic lock, and electrified panic hardware each have distinct installation, current draw, and code implications. Electric strikes work with most mechanical locksets and are easiest to retrofit. Magnetic locks (maglocks) provide high holding force on glass and wood doors but require dedicated REX and panic-bar interfaces for egress compliance. Verify the door's existing prep before choosing.
Power draw and inrush current dictate power supply sizing. A 5-door system with 1A peak per lock can exceed an undersized 12VDC supply at simultaneous lock-down events. Account for accessories — REX motion sensors, door-position switches, electrified levers — when sizing the supply and the battery backup required for code compliance.
Tamper switches, door-position monitoring, and request-to-exit sensors generate the audit trail your security team needs. Mechanical contact switches are cheaper; magnetic reed switches resist tampering better. Pair each door with a position switch and a REX sensor at minimum — without door-position monitoring, you can't distinguish 'authorized entry' from 'door held open after authorized entry,' which is a common compliance gap.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 8MP, 2MP |
| IP Rating | IP66, IP67 |
| Connectivity | Wired |
| Power | AC/DC, Battery |
| Type | Accessory, Controller, Cable, Switch, Power Supply, Access Card, Contact, Lock/Strike |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
Fail-safe or fail-secure for stairwell doors?
Fail-safe is mandatory on most stairwell doors and other code-designated egress paths — the lock must release on fire alarm or power loss to allow evacuation. Fail-secure on those doors is a code violation. Confirm the local fire code and AHJ requirements; commercial buildings in the U.S. follow NFPA 101 and the International Building Code, both of which detail egress lock behavior in detail.
What current draw should I plan for electrified locks?
Typical 12VDC electric strikes draw 200-500 mA continuous, with inrush spikes of 1-2A at engagement. Magnetic locks rated for 1,200 lbs holding force draw around 500 mA continuous at 24VDC. Power supplies need to handle simultaneous lock-down current — emergency lockdown events activate all locks at once. Size the supply with at least 25% headroom and confirm battery backup runtime requirements.
Do I need a request-to-exit (REX) sensor?
Most code-compliant electrified door installations require a REX sensor to shunt the alarm during authorized egress. Without REX, every egress event registers as a forced-door alarm. PIR motion sensors are the common choice and integrate with the door controller's REX input. Mechanical push-bar REX is also acceptable for hardware that includes that switch natively.
Can I use one lock for both card and mechanical key entry?
Yes — most electrified strikes and locks allow mechanical key override on the same door. Maintaining a master key for emergency mechanical access is required by code in many jurisdictions and recommended in all. Document the master key holders carefully; an uncontrolled master key program undermines the electronic audit trail.
What's the lifespan of a magnetic lock?
Quality maglocks (Securitron M62, HES, von Duprin) typically last 15-20 years with no mechanical wear. Failure points are the connector, the armature plate-to-lock alignment, and contamination of the magnetic face. Plan for armature replacement at year 10 as a hedge against alignment drift. Strike-type locks with mechanical parts last 5-10 years before strike-plate wear becomes a reliability issue.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.