HES

SKU: 1600-605-DLMS

HES Electric Strike Body Only Dual lock monitor - 1600-605-DLMS

• Dual independent monitors confirm both latch and deadbolt status from one strike body.
• Body-only design lets you field-configure faceplate, keeper, and voltage for the opening.
• Direct panel integration delivers real-time door status without external sensors or added wiring.

HES

SKU: 1600-606-DLMS

HES Electric Strike Body Only Dual lock monitor - 1600-606-DLMS

• Strike body assembly for field replacement on 1006/1600 series
• Dual lock monitor contacts report latch and aux bolt status
• Retrofit-friendly without complete strike changeout

HES

SKU: 1600-612-DLMS

HES Electric Strike Body Only Dual lock monitor - 1600-612-DLMS

• Strike body-only design enables component-level retrofit without disturbing existing frames.
• Dual lock monitor outputs deliver independent latch and deadbolt status signals to your panel.
• Discrete monitor contacts support direct integration with alarm systems and BMS platforms.

HES

SKU: 1600-605-DLM

HES Electric Strike Body Only Dual lock monitors - 1600-605-DLM

• Dual lock monitors output separate bolt and door status signals for precise event differentiation.
• Fail-secure mode holds the door locked on power loss; rated 1,500 lbs static strength.
• UL 1034 and UL 10C 3-hour fire listed; body-only design fits existing 1600 series faceplates.

HES

SKU: 1600-606-DLM

HES Electric Strike Body Only Dual lock monitors - 1600-606-DLM

• Dual lock monitors deliver independent latch and deadbolt status signals to your access control panel.
• Body-only design replaces failed strike without faceplate removal, cutting retrofit and service time.
• Rated UL 1034 and UL 10C 3-hour fire, with 1,500 lb static strength for commercial-grade reliability.

HES

SKU: 1600-612-DLM

HES Electric Strike Body Only Dual lock monitors - 1600-612-DLM

• Dual lock monitors signal latch and bolt status independently—no extra sensors needed.
• 1,500 lb static strength with UL 1034 and UL 10C 3-hour fire listing for compliant installs.
• 12/24V DC field-selectable operation fits existing power supplies without rewiring.

HES

SKU: 1600-629-DLM

HES Electric Strike Body Only Dual lock monitors - 1600-629-DLM

• Dual lock monitors give independent latch and deadbolt status to your access control panel.
• Body-only format reuses existing 1600 Series faceplates, cutting retrofit labor and parts cost.
• Rated UL 1034 and UL 10C 3-hour fire with 1,500 lb static strength for commercial-grade doors.

HES

SKU: 1600-605-LM

HES Electric Strike Body Only Lock monitor - 1600-605-LM

• Body-only format pairs with existing HES 1600 series faceplates for retrofit installs.
• Integrated lock monitor output enables forced-door and door-ajar alerts at the panel.
• Suits wood, hollow metal, and aluminum frames; supports fail-secure or fail-safe wiring.

HES

SKU: 1600-606-LM

HES Electric Strike Body Only Lock monitor - 1600-606-LM

• Body-only form factor swaps into existing 1600 series frames without re-prepping cutouts.
• Integrated lock monitor adds keeper position feedback to panels lacking position sensing.
• Supports forced-door and door-held-open alarms when wired to compatible access controllers.

HES

SKU: 1600-612-LM

HES Electric Strike Body Only Lock monitor - 1600-612-LM

• Body-only format replaces failed strike internals without disturbing existing faceplates.
• Integrated lock monitor delivers real-time door status for forced-door and held-open alarms.
• Compatible with HES 1600 series faceplates, reducing retrofit labor on multi-phase deployments.

HES

SKU: 1600-605-LMS

HES Electric Strike Body Only Lock monitor and - 1600-605-LMS

• Integrated lock monitor confirms latch engagement, closing audit-trail gaps.
• Body-only format supports retrofit installs on existing cylindrical or mortise hardware.
• Monitor output feeds directly to access control panels for real-time alarm verification.

HES

SKU: 1600-606-LMS

HES Electric Strike Body Only Lock monitor and - 1600-606-LMS

• Drop-in body replacement retrofits existing HES 1600 series strikes without new frame prep.
• Integrated lock monitor delivers contact closure signal directly to your access control panel.
• Eliminates separate door position switches by confirming keeper engagement in one unit.

HES

SKU: 1600-612-LMS

HES Electric Strike Body Only Lock monitor and - 1600-612-LMS

• Strike body-only design enables frame retrofits without removing faceplate hardware.
• Integrated lock monitor output lets control panels distinguish forced-door from valid access.
• Compatible with existing HES 1600 series faceplates, minimizing re-cut and re-trim labor.

HES

SKU: 1600-606

HES Electric Strike Body Only Satin brass - 1600-606

• Drop-in body-only replacement for HES 1600 series cuts material and labor costs.
• Rated 1,500 lbs static strength with UL 1034 and UL 10C 3-hour fire listings.
• 12/24V DC field-selectable operation draws only 0.13 A at 24V DC.

HES

SKU: 1600-612

HES Electric Strike Body Only Satin bronze - 1600-612

• Body-only format lets you replace worn strike mechanisms without re-drilling or rewiring.
• Fits existing HES 1600 series mounting patterns and keeper geometry for drop-in service.
• Satin bronze finish aligns with standard architectural hardware for consistent aesthetics.

HES

SKU: EM-04

HES EM-04 RFID Key Fob for KP-300

Passive RFID key fob for HES KP-300 contactless access control

• Passive RFID fob requires no battery, eliminating maintenance cycles at any door count.
• Native KP-300 compatibility means zero middleware or reader reconfiguration on deployment.
• Wiegand output integrates directly with third-party controllers supporting Wiegand input.