Refine by

No filters applied

Sub categories

Cellular Communicators

12 items

Intrusion Panels

33 items

Keypads & Touchscreens

34 items

Motion & Glass Break Detectors

67 items

Sirens & Sounders

12 items

Wireless Sensors

52 items

Access Cards & Credentials

22 items

Access Hubs & Controllers

21 items

Card Readers

54 items

Control Systems

258 items

Credentials

656 items

Door Controllers

139 items

Door Hardware & I/O

1530 items

Door Locks & Strikes

325 items

Showing Results for Access Control

Compare

Out of stock
HES

SKU: AM6325

HES AM6325 Maglock Mounting Brackets

Aluminum mounting brackets for HES electromagnetic locks, frame or surface
- Compatible with HES maglock systems for standard access control installations
- Supports both door frame and surface-mounted configurations in one bracket set
- Aluminum construction rated for up to 7-door capacity per installation
$113.00 $112.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$113.00 $112.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: AM6326

HES AM6326 Maglock Bracket

HES maglock mounting bracket for interior access control systems
- Purpose-built for HES electromagnetic locks with integrated alignment
- Aluminum construction rated for up to 7-door capacity installations
- Fits standard interior door frames without custom modifications
$120.00 $119.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$120.00 $119.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: AM6330

HES AM6330 Maglock Mounting Brackets

Door frame maglock mounting brackets for access control systems
- Door frame mount configuration ensures precise maglock alignment on single or double doors.
- Bracket form factor supports standard commercial door frame depths for consistent fitment.
- Lightweight at 0.3 lb; US-made hardware built for professional integrator installation.
$51.00 $50.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$51.00 $50.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: AM6330DURO

HES AM6330DURO Header Plate for 1200 Series Duronic

Header plate for HES 1200 Series Duronic strikes in multi-unit setups
- Frame-mounted steel plate with standardized fastening for 1200 Series strikes
- Supports redundant and multi-unit strike installations in commercial access control
- 24VDC compatible; designed for consistent alignment in standard door frames
$82.00 $81.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$82.00 $81.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: AM6331

HES AM6331 Maglock Mounting Brackets

Maglock mounting brackets for HES electromagnetic lock systems
- Compatible with HES maglock assemblies for door frame and header mounting
- Mechanical retention brackets support standard commercial access control installations
- US-manufactured steel brackets weigh 0.6 lb for reliable structural support
$91.00 $90.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$91.00 $90.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: AM6332

HES AM6332 Maglock Bracket Assembly

Precision bracket assembly for HES electromagnetic lock systems
- Engineered alignment and load transfer for HES maglock product line
- Handles repeated lock cycles and door stress without flex or fatigue
- US-made, high-security rated construction for commercial/industrial doors
$117.00 $116.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$117.00 $116.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: AM6333

HES AM6333 Maglock Mounting Brackets

Dual-voltage maglock brackets for HES systems, surface or frame-mount
- Supports 12/24 VDC input, eliminating dual-voltage sourcing when standardizing panels.
- Surface-mount and frame-mount options accommodate metal and wood jamb installations.
- Engineered for direct HES maglock integration with no adapter plates or custom fab.
$26.00 $25.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$26.00 $25.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: AM6335

HES AM6335 Armature Plate for 1200 Series Magnetic Lock

Ferrous armature plate for HES 1200 series magnetic locks
- Door frame mount design aligns with 1200 series electromagnet
- Ferrous construction optimized for reliable magnetic field engagement
- Interior access control for commercial and institutional applications
$85.00 $84.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$85.00 $84.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: AM6335A

HES AM6335A Armature Plate Assembly 1200 Series

Armature plate assembly with integrated bond sensor for HES 1200 strikes
- Real-time strike plate contact verification via integrated bond sensor
- Standard access control wiring compatible; retrofit or new installation
- Precision steel construction for fail-secure door monitoring in secured facilities
$85.00 $84.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$85.00 $84.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: AM6338

HES AM6338 Maglock Mounting Bracket

HES maglock mounting bracket for standard commercial door frames
- Purpose-built for HES electromagnetic lock systems with precision alignment
- Fits standard commercial door frame configurations; field installation required
- 24VDC electromagnetic lock strike; rated for 05-door capacity applications
$72.00 $71.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$72.00 $71.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: AM6340

HES AM6340 Maglock Mounting Brackets

Door frame and wall mounting brackets for HES electromagnetic locks
- Supports door frame and wall mount orientations, eliminating custom fabrication on retrofits.
- Engineered for HES electromagnetic locks, ensuring mechanical fit and rated load alignment.
- Ships with all fasteners for drywall, masonry, and frame construction—no separate hardware order.
$25.00 $24.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$25.00 $24.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: AM6360

HES AM6360 Maglock Brackets

Steel maglock mounting bracket for 12/24VDC access control systems
- Steel-reinforced maglock brackets for AM6360 installs
- Eliminates 1-2mm misalignment that causes failures
- Built for cold-climate and high-vibration entries
$44.00 $43.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$44.00 $43.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: AM6361

HES AM6361 Maglock Mounting Brackets

Commercial maglock mounting brackets for frame & jamb configurations
- Mounting brackets for HES electromagnetic locking systems
- Adapts maglocks to varied door frame and jamb configurations
- Direct OEM fit preserves lock pull-strength rating
$40.00 $39.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$40.00 $39.99 Save $0.01

Add to quote Compare
Compare

Add to Cart The item has been added
HES

SKU: AM6370

HES AM6370 Maglock Mounting Brackets

Door frame maglock mounting brackets for HES access control systems
- Fastens directly to standard North American door frames without modifications
- Engineered for HES electromagnetic lock compatibility and reliable engagement
- User-supplied fasteners; reduces installation labor and alignment risk on retrofits
$220.00 $219.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$220.00 $219.99 Save $0.01

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
HES

SKU: AM6370C

HES AM6370C 3-Piece Z Bracket for 1200 with Cover

3-piece Z-bracket assembly for HES 1200 series electromagnetic locks
- Integrated protective cover shields against weather, dust, and tampering
- Engineered for standard door frame installations with optimized load distribution
- Suitable for commercial, healthcare, educational, and industrial access control
$267.00 $266.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$267.00 $266.99 Save $0.01

Add to cart Add to quote Compare
Compare

Out of stock
HES

SKU: AM6370CDURO

HES AM6370CDURO Z Bracket with Cover 3-Piece

Z-bracket with cover for outdoor cameras and access control
- 3-piece modular assembly mounts wall or standard configurations
- Duronic material resists corrosion and weather for outdoor duty
- 1200-series load rating supports surveillance and security hardware
$325.00 $179.99 Save $145.01

Add to Cart
The item has been added
Free shipping over $499

$325.00 $179.99 Save $145.01

Add to quote Compare

Access Control

Access control systems secure doors, manage credentials, and enforce entry policies across commercial facilities. Build a scalable deployment with the right combination of controllers, readers, credentials, and door hardware.

Plan Your Deployment

Door count and expansion requirements
Reader type (card, keypad, biometric) and credential format
Fail-safe vs fail-secure hardware design
Power, cabling, and network connectivity planning
Multi-site governance and consistent standards

Buying Guide Get Recommendations Deployment Support

Build a Complete System

Most access control installations need these companion products to be fully functional. Add them to your cart for system-wide compatibility.

Door intercoms

Aiphone DA-1MD Audio Handset Master Station

$82.99

Aiphone DB-1MD Hands-Free Master Station

$144.99

Aiphone DB-1SD Hands-Free Sub Master Station

$113.99

Aiphone JOS-1FW 7" Video Intercom Box Set with Mobile A

$820.99

What to Look For When Buying

The six decisions that matter most before you spec.

Fail-Safe vs Fail-Secure

Fail-safe locks (power-to-lock) unlock on power loss — required for egress routes by most fire codes. Fail-secure (power-to-unlock) stays locked on power loss — used on office and storage doors where security trumps egress. Life-safety code interpretation varies by jurisdiction; consult your AHJ before specifying. See our fail-safe vs fail-secure guide.

OSDP vs Wiegand

Wiegand is the legacy reader-to-controller protocol (unencrypted, one-way, limited to 26-bit formats). OSDP (Open Supervised Device Protocol) is the modern replacement — bidirectional, encrypted, supervised, and future-proof for Seos/mobile credentials. New deployments should be OSDP; plan a Wiegand-to-OSDP migration path in legacy systems before adding mobile credential support.

Credential Technology

125 kHz proximity (HID Prox, EM) is the legacy standard — cheap, cloneable, no security. 13.56 MHz smart cards (iCLASS SE, MIFARE DESFire EV3, Seos) use AES encryption and are the commercial standard. Mobile credentials via NFC/BLE increasingly replace physical cards — but only on OSDP-capable readers. Specify multi-technology readers for migration flexibility.

Cloud vs On-Prem Management

Traditional server-based access platforms (Lenel, Genetec, C-Cure) require IT infrastructure and maintenance contracts. Cloud-native platforms (Brivo, Openpath/Avigilon Alta, Genea) eliminate servers but add per-door monthly fees. Mid-size deployments increasingly choose cloud; enterprise + critical infrastructure still favor on-prem. Hardware choice determines which platforms you can run.

Power Supply Sizing

Every lock + reader + controller has an inrush current and a holding current — and they differ. Maglocks hold at 300-500 mA but pull 800 mA on release. UL 294 power supplies rated for total simultaneous holding + 25% headroom, with battery backup sized to code-required runtime. Undersized power supplies are the #1 cause of access-control nuisance failures.

Code Compliance (Egress)

IBC, NFPA 101, and ADA all mandate unimpeded egress. A magnetically-locked door requires a fire-alarm tie-in, a bond-sensor, and a request-to-exit device — omit any and the door is a code violation. Delayed-egress maglocks require 15-second delay + sounder per NFPA. Always confirm lock spec with the AHJ before ordering.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

OSDP v2 + Secure Channel

Open Supervised Device Protocol v2 with Secure Channel Protocol (SCP) delivers AES-128 encryption between reader and controller over RS-485. Replaces unencrypted Wiegand. Required for new federal deployments and FIPS 140-2 applications. All modern HID, ASSA ABLOY, and STid readers support OSDP + SCP.

Seos + iCLASS SE Credentials

HID Seos is the current-generation credential platform: AES-128 encrypted, multi-application, supports mobile wallets, backward-compatible with iCLASS SE. Seos credentials work on Seos readers + older iCLASS SE readers — iCLASS SE credentials do not work on legacy iCLASS (non-SE) readers. Plan migrations carefully.

FIPS 201 / PIV + PIV-I

Federal Identity Verification standard — the credential format used for federal employee and contractor badges. PIV-I (Interoperable) is the commercial variant for hospitals, utilities, and critical-infrastructure contractors. Specify PIV/PIV-I-capable readers (HID pivCLASS, multiCLASS SE) for any facility that hosts government visitors.

UL 294 Listing

Underwriters Laboratories listing for access control system units — power supplies, controllers, and locks. UL 294 6th edition covers security, durability, and overcurrent/overvoltage protection. Insurance and code requirements increasingly specify UL 294 listing. Altronix access-control power supplies are UL 294 listed across the catalog.

Wiegand Protocol

Legacy reader-to-controller protocol — one-way, unencrypted, variable bit-length format. Easily cloned with <$50 hardware. Still widespread because of low cost and universal compatibility. Acceptable for low-security interior doors; should be replaced with OSDP on any external or sensitive-area door.

Request-to-Exit (REX)

Motion- or push-button-activated device that signals the access controller to unlock the door from the secure side without generating an alarm. Required for maglock-equipped egress doors per code. PIR REX sensors must be properly aimed — nuisance alarms and held-door violations trace back to bad REX placement more than any other cause.

Typical Deployment Scenarios

Multi-Tenant Office Building

Lobby turnstiles with multi-tech readers, tenant suite doors with HID Signo + Seos, parking garage with long-range readers, elevator control for floor-by-floor access. Cloud platform (Brivo, Openpath) with mobile credentials replaces physical card issuance. Integration with SIP video intercoms for visitor management.

K-12 School Secure Vestibule

Front entry vestibule with fail-secure electric strike, interior Aiphone video intercom for visitor buzz-in, badge readers for staff, lockdown button integrated with mass notification. Back-of-house doors fail-safe per code. Full VMS integration for event overlay.

Hospital & Healthcare

Unit doors with HID multiCLASS SE + PIV-I compatibility, medication rooms with dual-authentication (card + biometric), ER ambulance bays with ruggedized readers, delayed-egress on behavioral health wards. Lenel or Genetec server-based platform with HIPAA-compliant audit logging. High-cycle-count electric strikes required.

Data Center & Critical Infrastructure

Biometric readers at server-room entries, mantrap doors with anti-tailgating sensors, cage-level access with OSDP + SCP, 7x24 audit logging. FIPS 201 / PIV-I credentials. Integration with IP cameras for tailgating review and infrastructure monitoring for physical-layer security.

Frequently Asked Questions

What's the difference between fail-safe and fail-secure locks?

Fail-safe locks (also called "power-to-lock") unlock on power loss — required for egress routes by most fire and life-safety codes. Fail-secure locks ("power-to-unlock") stay locked on power loss — typically used on office, storage, and supply doors where security trumps egress. Always confirm lock selection with the local AHJ; see our fail-safe vs fail-secure guide.

Is OSDP required for new access control installations?

Not legally required in most jurisdictions — but strongly recommended and effectively mandatory for federal deployments. OSDP with Secure Channel provides AES-128 encryption between reader and controller, bidirectional supervision, and future-proof support for mobile credentials. Legacy Wiegand is unencrypted and easily cloned. New deployments should be OSDP-capable from day one; legacy systems should plan a migration path.

Are HID card readers NDAA compliant?

Yes. HID Global is headquartered in Austin, TX, manufactures in multiple allied countries, and is fully NDAA Section 889 compliant. HID Signo, multiCLASS SE, iCLASS SE, and pivCLASS reader families are all eligible for federal, state government, and critical-infrastructure procurement. Credential cards are manufactured to the same compliance standard.

How do I size an access control power supply?

Add up holding current for all locks + reader standby current + controller standby current, then add 25% headroom for inrush and aging. Battery backup should provide code-required standby runtime (typically 4 hours for fire-alarm tie-ins; 15 min for access-only). Altronix UL 294 power supplies post clear spec sheets for total and per-output current — match to your actual load, don't guess.

Can mobile credentials replace physical access cards?

In most modern deployments, yes — but the reader has to support it. Readers need NFC and/or BLE (Bluetooth Low Energy) plus a partnership with the mobile credential platform (HID Mobile Access, Openpath, Kastle, etc.). Older proximity-only readers cannot read mobile credentials. Mobile adoption is usually mixed with physical cards during a multi-year transition — plan for both.

What's the difference between iCLASS SE and Seos credentials?

iCLASS SE was HID's previous-generation secure credential (AES-128, 2013-era). Seos is the current generation (2016+) — same AES-128 security, but multi-application, mobile-wallet capable, and future-proof. Seos credentials work on Seos-capable readers and on older iCLASS SE readers. iCLASS SE credentials do not work on legacy (pre-SE) iCLASS readers. See our HID Global catalog for current Seos SKUs.